NMR investigation of concentrated alumina and silica slurries

The longitudinal relaxation times (T₁) of water in concentrated silica and alumina slurries were measured as a function of solids content. It was shown that the results could be fit very well with a two-phase fast-exchange model between free and surface-bound water. As expected, values of T₁ for bound water were in the order of 20–2000 times lower than that for free water, indicating a higher effective viscosity of the surface-bound water. The strength of the interaction depended on the particular surface, and all of the aluminas examined interacted more strongly with water than the two silicas studied, which themselves differed considerably. The chemical mechanical polishing (CMP) removal rate of tantalum by silica slurries was shown to be directly correlated with the interaction parameters, derived from the NMR relation times rather than with total surface hydroxyl group concentration.     

光纤光栅选频掺Yb3+双包层光纤激光器

利用相位掩模法 ,在D形内包层掺Yb3 双包层光纤一端直接写制出Bragg光栅 ,用作双包层光纤激光器的输出腔镜 .试验得到了线宽为 0 196nm ,波长为 10 5 8 2nm ,最高输出功率为 5 70mW的稳定激光输出 ,解决了激光器中模式竞争造成的输出不稳定现象 .从速率方程出发 ,对激光器的输出功率与抽运功率、光栅反射率的关系以及最佳光纤长度进行了理论分析 ,结果与实验符合很好     

Preparation and applications of a polymer-supported phosphoryl azide

A polymer-supported diphenylphosphoryl azide was prepared. This polymer-supported version of DPPA is useful due to its lower toxicity, moisture tolerance and ease of workup after reaction. The synthetic application of this solid-phase reagent was explored by conversion of a variety of carboxylic acids to urethanes and ureas through Curtius rearrangement reactions. Carboxylic acids bearing different functional groups (aromatic, aliphatic and heterocyclic carboxylic acids) were subjected to the reaction. The corresponding products were isolated with satisfactory yields.     

A monotone iterative scheme for a nonlinear second order equation based on a generalized anti–maximum principle

In this paper, a generalized anti–maximum principle for the second order differential operator with potentials is proved. As an application, we will give a monotone iterative scheme for periodic solutions of nonlinear second order equations. Such a scheme involves the L^p norms of the growth, 1 ≤ p ≤ ∞, while the usual one is just the case p = ∞.     

Spectra Analysis of a Novel Ti-Doped LiAlO2 Single Crystal

LiAlO2 single crvstals doped with Ti at concentration 0.2at.% are grown by the Czochralskl technique with dimensions φ42×55mm. Ti ions in the crystal are quadrivalence proven by comparing the absorption and fluorescence spectra of pure LiAlO2 and Ti： LiAlO2. After air and Li-rich atmosphere annealing, the absorption peaks in the range of 600-800nm disappear. We conclude that 682 and 756nm absorption peaks are attributed to the VLi and Vo absorptions, respectively： The peaks at 716nm and 798nm may stem from the VLi^＋ and absorptions. The colour-centre model can be applied to explain the experimental phenomena. Ti^4＋-doping produces more lithium vacancies in the LiAlO2 crystal. The intensities of [LiO4] and the associated bonds remain unchanged, which improves the anti-hydrolyzation and thermal stability of LiAlO2 crystals.     

On a Generalized Cochrane Sum and Its Hybrid Mean Value Formula

The main purpose of this paper is to use a mean value theorem of Dirichlet L-functions to study the asymptotic property of a hybrid mean value of a generalized Cochrane sum, and give an interesting mean value formula.2000 Mathematics Subject Classification: Primary—11F20; Secondary—11F99     

The accurate dimensional measurements within small internal structures

This paper shows that the dimension of internal structure of a component can be measured remotely to a resolution better than 5 μm by use of the combination of high resolution optical microscopy and image processing.A specialised high resolution, long working distance and diffraction limited lens was used to image within the component. A series of digital images were made to map spatially the interior of the component. An edge detector was then used to localise the specific location of features in order that an accurate internal measurement could be made. A visualisation of the internal surface finish was also achieved.     

A jet appearing when a black hole event horizon touches the rindler horizon

The Hawking effect of a nonuniformly rectilinearly accelerating Kinnersley black hole is studied. Its horizons are rotationally symmetric. Its Hawking temperature depends not only on the time, but also on the polar angle. When a Kinnersley black hole touches its Rindler horizon, the Hawking temperature at the contact point is reduced to zero. But at the opposite pole of the black hole, the Hawking temperature increases rapidly. A jet appears as a tail of the accelerating black hole.     

混合位级正交试验设计的极差分析方法

本文指出，在混合位级的正交试验设计中，以往的极差分析方法存在着不足。本文给出了极差的修正方法，并用大量实例做了数值验证，说明这个修正确实很有效