Flame Emission Spectrometry Using Atomic Absorption Apparatus (I) Determination of Sr In Sea Water

Flame emission determination of Sr in sea water is studied using an ordinary atomic absorption apparatus. The analytical line 4607 A is used with background correction at 4616 A. The ionization is found to be negligible in air acetylene flame with sea water, and the interference of H₂SO₄ is elimentated using the higher part of the flame.     

Synthesis of Anthracene Derivatives with Azaacene-Containing Iptycene Wings and the Utilization as a Dopant for Solution-Processed Organic Light-Emitting Diodes

Substituted acene derivatives are regarded as promising materials for organic electronic devices such as organic light-emitting diodes (OLEDs). In particular, anthracene derivatives are known to exhibit good fluorescence property, with the air stability and solubility in common organic solvents expected to give advantages for solution-processed device fabrication. In this study, a series of bistriisopropylsilyl(TIPS)ethynyl anthracene derivatives with azaacene-containing iptycene wings have been synthesized by using condensation reactions. Effects of size of azaacenes on optical properties and packing structures were investigated. UV/Vis absorption and fluorescence spectra indicate that the π-elongation of iptycene units has small effects on the overall π-system, which is also supported by electrochemical measurements. Secondly, single-crystal X-ray analysis implies that the molecules likely have interactions with the iptycene units of adjacent molecules, while the iptycene wings and TIPSethynyl groups can prevent the central anthracene unit from undesirable non-radiative energy loss. Finally, the most emissive derivative was used as a dopant for solution-processed OLEDs, showing obvious electroluminescence with a luminance of over 920 cd m⁻².     

Effects of a lysophosphatidylcholine and a phosphatidylcholine on the morphology of taurocholic acid-based mixed micelles as determined by small-angle X-ray scattering

We previously showed that Caco-2 cell absorption of β-carotene from taurocholic acid (TA)-based mixed micelles differed depending on the composition of the micelles. In this study, the shapes and sizes of TA-based mixed micelles, that is, mixed micelles of TA, 1-oleoyl-rac-glycerol (MG), oleic acid (OLA), and either 1-palmitoyl-sn-glycero-3-phosphocholine (MPPC; i.e., a lysophospholipid) or 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC; i.e., a phospholipid) (60:3:1:0.75–12) were determined by using small-angle X-ray scattering (SAXS). We found that increasing the ratio of MPPC in mixed micelles of TA, MG, OLA, and MPPC was responsible for the previously observed enhanced β-carotene absorption by Caco-2 cells and changed the micelle shape from core–shell spherical to core–shell ellipsoidal. In contrast, increasing the ratio of POPC in mixed micelles of TA, MG, OLA, and POPC was responsible for the suppressed β-carotene absorption by the cells, changed the micelle shape from core–shell spherical to core–shell ellipsoidal to core–shell cylindrical, and caused a rapid increase in micelle volume. These results will be useful for understanding the mechanisms that mediate β-carotene absorption by cells and for developing technologies to improve the intestinal absorption of lipophilic components of drugs and nutrients.     

Comparative examination of titania nanocrystals synthesized by peroxo titanic acid approach from different precursors

Titanium dioxide nanocrystalline particles were synthesized by peroxo titanium acid (PTA) approach from titanium alkoxide and inorganic salt precursors, and their structural and surface properties, porosities, and photocatalytic activities were comparatively examined by XRD, TG/DTA, DRIFT, UV-vis, low temperature N(2) adsorption, and methyl orange (MO) degradation. It was found that nanoparticles with single anatase phase can be obtained from alkoxide precursor even near room temperature if synthesis conditions are appropriately controlled. PTA-derived anatase nanoparticles from titanium alkoxide precursor have smaller crystalline sizes and better porosities, and contain less amount of peroxo group and no organic impurities as compared to those from TiCl(4) precursor. The advantages in structural property, porosity, and surface properties (few deficiencies) lead to a much better photocatalytic activity for TiO(2) nanoparticles from titanium alkoxide precursor in comparison with those from TiCl(4) precursor.     

Hybrid molecular material exhibiting single-molecule magnet behavior and molecular conductivity

Two unique materials based on Mn4 single-molecule magnet (SMM) clusters (ST=9) and integer or non-integer average valent platinum maleonitriledithiolate (mnt2-) complexes, [{MnII2MnIII2(hmp)6(MeCN)2}{Pt(mnt)2}2][Pt(mnt)2]2.2MeCN (1) and [{MnII2MnIII2(hmp)6(MeCN)2}{Pt(mnt)2}4][Pt(mnt)2]2 (2), were synthesized by the material diffusion method and electrochemical oxidation, respectively (hmp-=2-hydroxymethylpyridinate). 1 and 2 are comprised of four and six [Pt(mnt)2]n- units, respectively, in addition to a common MnII2MnIII2 double-cuboidal unit, [MnII2MnIII2(hmp)6(MeCN)2]4+ (hereinafter [Mn4]4+). Among the [Pt(mnt)2]n- units, two units in 1 and four units in 2 are coordinated with the [Mn4]4+ unit, forming a 1D chain of {-[Mn4]-[Pt(mnt)2]2-} for 1 and a discrete subunit of {[Pt(mnt)2]2-[Mn4]-[Pt(mnt)2]2} for 2. The other two [Pt(mnt)2]n- units, occupying void space of the packing, form a stacking column with the coordinating [Pt(mnt)2]n- units, finally constructing hybrid frames of aggregates consisting of [Mn4]4+ units and [Pt(mnt)2]n- units. Electronic conductivity measurements revealed that 1 is an insulator and 2 is a semiconductor with sigma=0.22 S.cm(-1) at room temperature and an activation energy of 136 meV. Detailed magnetic measurements proved that the [Mn4]4+ units in 1 and 2 behave as SMMs with an ST=9 ground state at low temperatures. There is no significant interaction between [Mn4]4+ units and [Pt(mnt)2]n- units, but interactions between localized spins of [Pt(mnt)2]n- were detected even in 2 at low temperatures where the conductivity is electronically insulated. 2 is the first example of a hybridized material exhibiting SMM behavior and electronic conductivity.     

Stabilization and translation of immobilized mRNA on latex beads for cell-free protein synthesis system

The stability of immobilized mRNA against ribonucleases was investigated in a cell-free protein synthesis system. The plasmid-encoding protein A with the 20-mer poly(A) tail under the control of T7 promoter was constructed, and the corresponding mRNA was synthesized by T7 RNA polymerase reaction. The resulting mRNA was immobilized on oligo(dT)-immobilized latex beads by hybridization utilizing the poly(A) tail of mRNA at the 3'-terminus. The mRNA was stabilized against three types of nucleases (3'-OH exonuclease, 5'-OH exonuclease, and endonuclease) by immobilization. Translation of immobilized mRNA with a continuous-flow cell-free protein-synthesizing system from Saccharomyces cerevisiae was ascertained. Reusability of the immobilized mRNA as genetic information was also examined.     

Halorhodopsin from natronomonas pharaonis forms a trimer even in the presence of a detergent, dodecyl-beta-D-maltoside

Halorhodopsin (HR) is a transmembrane seven-helix retinal protein, and acts as an inward light-driven Cl⁻ pump. HR from Natronomonas pharaonis (NpHR) can be expressed in Escherichia coli inner membrane in large quantities. Here, we showed that NpHR forms the trimer structure even in the presence of 0.1% (2 m m ) to 1% (20 m m ) dodecyl-β- d -maltoside (DDM), whose concentrations are much higher than the critical micelle concentration (0.17 m m ). This conclusion was drawn from the following observations. (1) NpHR in the DDM solution showed an exciton-coupling circular dichroism (CD) spectrum. (2) From the elution volume of gel filtration, the molecular mass of the NpHR–DDM complex was estimated. After evaluation of the mass of the bound DDM molecules, the mass of NpHR calculated was approximately equal to that of the trimer. (3) The cross-linked NpHR by glutaraldehyde gave the SDS-PAGE corresponding to the trimer. Mass spectra of these samples also support the notion of the trimer. Using the membrane fractions expressing NpHR ( Escherichia coli and Halobacterium salinarum ), CD spectra showed exciton-coupling, which suggests strongly the trimer structure in the cell membrane.     

Ruthenium-catalyzed [1,n]-metallotropic shift (n = 3, 5) of alkynyl carbene complex intermediates

The ruthenium-catalyzed isomerization of diynes and triynes involving propargyl carboxylate moieties affords dienynes and dienediynes, respectively. The [1,n]-metallotropic shift (n = 3, 5) (carbene walk) of in situ generated alkynyl carbene complexes has been proposed for the catalytic isomerization reaction.     

Piezoelectric immunosensor for bisphenol A based on signal enhancing step with 2-methacrolyloxyethyl phosphorylcholine polymeric nanoparticle

An immunoassay in which BPA competed with a BPA-horseradish peroxidase conjugate for binding to anti-BPA antibodies, coupled to a piezoelectric (PZ) immunosensor, was able to detect 0.1 ng mL(-1) BPA. To enhance the sensitivity of the assay, we tested nanoparticles approximately 200 nm in diameter, coupled to anti-BPA antibodies, to increase the mass change on the surface of the immunosensor and thereby increase the frequency shift detected. This second step, using nanoparticles coated with anti-BPA antibodies, improved the sensitivity of the assay by approximately eight times at BPA concentrations below 10 ng mL(-1). Field emission-scanning electron microscopy (FE-SEM) showed that polymeric 2-methacrolyloxyethyl phosphorylcholine (MPC) nanoparticles coupled to antibodies remained monodisperse on the surface of the immunosensor and therefore produced stable signals in the immunosensors. Since the frequency shift detected in the assay mainly originated from the mass change on the surface of the PZ crystal, the colloidal stability of the antibody-conjugated particles used in the enhancement step played an extremely important role in achieving a stable and highly sensitive signal.