The effect of surface microtopography of poly(dimethylsiloxane) on protein adsorption, platelet and cell adhesion

Chemical homogeneous poly(dimethylsiloxane) (PDMS) surface with dot-like protrusion pattern was used to investigate the individual effect of surface microtopography on protein adsorption and subsequent biological responses. Fibrinogen (Fg) and fibronectin (Fn) were chosen as model proteins due to their effect on platelet and cell adhesion, respectively. Fg labeled with ¹²⁵I and fluorescein isothiocyanate (FITC) was used to study its adsorption on flat and patterned surfaces. Patterned surface has a 46% increase in the adsorption of Fg when compared with flat surface. However, the surface area of the patterned surface was only 8% larger than that of the flat surface. Therefore, the increase in the surface area was not the only factor responsible for the increase in protein adsorption. Clear fluorescent pattern was visualized on patterned surface, indicating that adsorbed Fg regularly distributed and adsorbed most on the flanks and valleys of the protrusions. Such distribution and local enrichment of Fg presumably caused the specific location of platelets adhered from platelet-rich plasma (PRP) and flowing whole blood (FWB) on patterned surface. Furthermore, the different combination of surface topography and pre-adsorbed Fn could influence the adhesion of L929 cells. The flat surface with pre-adsorbed Fn was the optimum substrate while the virgin patterned surface was the poor substrate in terms of L929 cells spread.     

Synthesis and characterization of A1 doped δ-laminar crystal sodium silicate

An modified laminar crystal sodium silicate(A1-SKS-6) was synthesized by spray drying and high temperature crystallization using sodium silicate as silicon source,Al atom as inorganic source and hexadecyltrimethy ammonium bromide(CTMAB) as the structure template.The hydrothermal stability of product was at least 1 h.The synthesized material was characterized by XRD and SEM.The results indicated that shape and intensity of XRD diffraction peak at 2θtook changes,but raw materialδphase crystal form kept unc...     

Er~(3+)∶Yb~(3+)∶Tm~(3+)共掺硼硅酸盐玻璃光致发光温度特性和能级劈裂

高温固相烧结法制备了Er^3＋：Yb^3＋：Tm^3＋共掺硼硅酸盐玻璃．在978nm半导体激光器抽运下,测量了样品在300～573K下光致发光谱强度随温度的变化,讨论了室温时上转换绿光和红光等波段的光谱劈裂．分析了Er^3＋：Yb^3＋和Tm^3＋之间的能量传递机制．研究结果表明,当温度升高时,Er^3＋：Yb^3＋：Tm^3＋共掺硼硅酸盐玻璃的481nm蓝光、517和534nm绿光、以及657nm红光等光致发光强度单调下降,在490K时几乎消失．但900nm左右的近红外光谱则随温度的升高而持续增强,而且其中心波长向短波方向移动．在室温时,光谱劈裂明显,高温时劈裂逐渐消失．     

PtCeOx/C as a novel methanol-tolerant electrocatalyst of oxygen reduction for direct methanol fuel cells

A prominent methanol-tolerant characteristic of the PtCeO_x/C electrocatalyst was found during oxygen reduction reaction process. The carbon-supported platinum modified with cerium oxide (PtCeO_x/C) as cathode electrocatalyst for direct methanol fuel cells was prepared via a simple and effective route. The synthesized electrocatalysts were characterized by X-ray diffraction and transmission electron microscopy. It was found that the cerium oxide within PtCeO_x/C present in an amorphous form on the carbon support surface and the PtCeO_x/C possesses almost similar disordered morphological structure and slightly smaller particle size compared with the unmodified Pt/C catalyst.     

气质联用仪法测定奶粉中多环芳烃

研究了奶粉中多环芳烃的气相色谱/质谱(GC/MS)测定方法. 样品经甲醇-KOH皂化后用甲苯提取, 提取液经微孔滤膜过滤后用气相色谱质谱仪测定其含量, 外标法定量. 结果16种PAHs的回收率范围为92.0%～106%;RSD为2.2%～4.7%. 方法能同时分离16种PAHs, 适合于奶粉中多环芳烃的分析测定.     

含氟水性涂料中全氟辛烷磺酰基化合物(PFOS)的高效液相色谱-串联质谱法测定

建立了用高效液相色谱-串联质谱(HPLC-MS/MS)测定含氟水性涂料中全氟辛烷磺酰基化合物(PFOS)的方法.含氟水性涂料中的PFOS采用超声提取,上清液经固相萃取柱淋洗萃取,萃取液经0.2 μm有机滤膜过滤后,以80:20 (体积比)的乙腈-10 mmol/L乙酸铵溶液为流动相,经HPLC分离后用多级反应监测(MRM)模式测定.用2个子离子的相对丰度定性,外标法定量.PFOS在0.002 ～0.1 mg/L范围内线性良好(r=0.999 5),回收率为96% ～101%,相对标准偏差为0.54% ～2.92%,方法的定量下限(S/N≥10)为2 mg/L(0.0002%),满足欧盟法规对含氟水性涂料中PFOS的限量检测要求.     

(Z)-1,3-二苯基-N,2-二对甲苯磺酰基-2,5-己二烯-1-胺的合成及其晶体结构

通过烯丙基溴化镁、1-苯基-2-对甲苯磺酰基乙炔和N-对甲苯磺酰基苯甲醛亚胺的三组分串联反应,立体及区域选择地合成了含1,4-二烯结构单元的多取代烯丙胺--(Z)-1,3-二苯基-N,2-二对甲苯磺酰基-2,5-己二烯-1-胺(1),其结构经1H NMR, IR, MS, 元素分析和X-射线单晶衍射表征.1为Z型结构,属单斜晶系,P2(1)/n空间群,晶胞参数为:a=11.388 1(2)(A), b=15.297 4(2)(A), c=17.123 8(3)(A), α=90.00°, β=107.62(10)°, γ=90.00°, V=2 843.16(8)(A)3, Z=4, Dc=1.303 g·cm-1, S=1.055.     

KF/Al203催化下由芳醛、丙二腈和2-(1,2-二氢-3-亚茚基)丙二腈或2-(2,3-二氢-4H-亚萘基)丙二腈-步合成芴或菲衍生物

以芳醛、丙二腈、2-(1,2-二氢-3-亚茚基)丙二腈或2-(2,3-二氢-4H-亚萘基)丙二腈为原料,乙醇为溶剂,在80℃下以KF/Al2O3为催化剂合成了一系列芴或菲的衍生物,该方法具有反应条件温和,产率高(72%～88%)和操作简单等优点.产物的结构通过IR,1H NMR和元素分析表征.     

Aqueous germanate solution,alternative sol–gel precursor for preparation of Mn<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Ge<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript> diluted magnetic semiconductors

The solids content and gelation time of aqueous germanate solution were examined in this work. Samples of 5, 10 and 20 mol% Mn doped Ge were prepared by using the aqueous germanate solution as a liquid Ge precursor. No second phase such as Mn₅Ge₃ was detected in the 5 and 10 mol% Mn doped samples, implying that Mn ions were uniformly diluted into the Ge host matrix. The 5 and 10 mol% Mn-doped Ge samples exhibit room-temperature ferromagnetic behaviors that are likely originated from the RKKY (Ruderman–Kittel–Kasuya–Yosida)-like interaction between the localized Mn ions in the Ge matrix. Therefore, the aqueous germanate solution can be an alternative sol–gel precursor for preparation of the Mn _x Ge_1−x diluted magnetic semiconductors (DMSs).     

Synthesis and property of a novel sulfonated poly(ether ether ketone) with high selectivity for direct methanol fuel cell applications

A novel membrane material based on random copolymer composed of poly(acrylonitrile-([3-(methacryloylamino)propyl]-dimethyl(3-sulfopropyl) ammonium hydroxide)) (PAN–MPDSAH) was synthesized by the water phase suspension polymerization. The zwitterionic PAN-based membranes were prepared through blending PAN and PAN–MPDSAH copolymer by a phase inversion method. The zwitterionic PAN-based membranes have higher hydrophilicity and wettability, and lower protein adsorption in comparison with the control PAN membrane. Ultrafiltration experiments revealed that membrane fouling, especially irreversible membrane fouling, for the zwitterionic PAN-based membranes is remarkably reduced due to the incorporation of zwitterionic PMPDSAH segments on the membrane surfaces. Moreover, the reversible membrane fouling during ultrafiltration process can be easily washed away by simple water cleaning. The zwitterionic PAN-based membranes can run for a long time and be reused without significant decrease of separation performance.