基于量子微扰的AlGaN/GaN异质结波函数半解析求解

基于量子力学微扰理论的分析，得到AlGaN/GaN异质结波函数的半解析模型.给出了模型的理论分析和计算结果.对于相同问题，给出了与差分算法的对照结果.与传统的差分方法相比，半解析方法具有收敛性强、大规模问题计算效率高的特点，更适合作为AlGaN/GaN异质结量子阱的求解算法. 关键词： AlGaN GaN 量子阱 薛定谔方程     

狄拉克方程的单旋量解法以及由此引起的认识上的差异

把狄拉克方程分解成了两个单旋量的联立方程组．指出现行的自旋理论仅考虑了其中的一个方程，是以一个单旋量代替双旋量来描述状态而建立起来的．笔者在认同现行自旋理论可以作为狄拉克方程的一种求解方法，因而同意其中的某些提法外，对于其主要的物理观念：微观粒子存在着独立于现实的位形空间之外的一个自旋空间，在这个自旋空间内禀着角动量S和磁矩μ；这个自旋理论是相对论性量子力学导出的必然结论等等看法予以否定．笔者认为，只有同时考虑两个单旋量的方程，同时计及两个单旋量，才能准确地描述状态，从而正确地描述客观规律．     

ANALYTIC SOLUTIONS OF AN ITERATIVE EQUATION WITH FIRST ORDER DERIVATIVE

This paper is concerned with a nonlinear iterative equation with first order derivative. By construction a convergent power series solution, analytic solutions for the original equation are obtained.     

基于Karhunen-Loève变换和小波谱特征矢量量化的三维谱像数据压缩

提出了基于Karhunen Lo埁ｖｅ变换的小波谱特征矢量量化三维谱像数据压缩方法耍幔颍瑁酰睿澹?Lo埁ｖｅ变换 /小波变换 /小波谱特征矢量量化方法应用了Karhunen Lo埁ｖｅ变换的消除谱相关性优良性能 ,应用二维小波变换消除空间相关性 ,在小波变换域内应用二维集分割嵌入块编码和一维谱特征矢量量化对三维谱像数据压缩 ,获得较高的压缩性能。实验结果表明 :Karhunen Lo埁ｖｅ变换 /小波变换 /小波谱特征矢量量化编码比Karhunen Lo埁ｖｅ变换 /小波变换 /改进对块零树编码和Karhunen Lo埁ｖｅ变换 /小波变换 /快速矢量量化编码方法在同样压缩比条件下 ,峰值信噪比提高 2dB和 1dB以上 ,而速度提高了 1.5和 8倍 ,整体压缩性能有较大的提高     

用于高数值孔径物镜的可调光瞳滤波器

根据矢量衍射理论，提出了一种用于提高高数值孔径显微物镜纵向分辨率的可调二元环形光瞳滤波器，通过改变滤波器的环半径获得不同的纵向分辨率，并利用共焦显微术点扩散函数的乘积性大大地降低了旁瓣相对主瓣的比值。模拟结果表明，这种新型滤波器不仅可以提高高数值孔径物镜的纵向分辨率，同时基本上不影响横向分辨率。     

Zinc-ion implanted and deposited titanium surfaces reduce adhesion of Streptococccus mutans

While titanium (Ti) is a commonly used dental implant material with advantageous biocompatible and mechanical properties, native Ti surfaces do not have the ability to prevent bacterial colonization. The objective of this study was to evaluate the chemical composition and bacterial adhesive properties of zinc (Zn) ion implanted and deposited Ti surfaces (Zn-PIIID-Ti) as potential dental implant materials. Surfaces of pure Ti (cp-Ti) were modified with increasing concentrations of Zn using plasma immersion ion implantation and deposition (PIIID), and elemental surface compositions were characterized by X-ray photoelectron spectrometry (XPS). To evaluate bacterial responses, Streptococcus mutans were seeded onto the modifiedTi surfaces for 48 h and subsequently observed by scanning electron microscopy. Relative numbers of bacteria on each surface were assessed by collecting the adhered bacteria, reculturing and counting colony forming units after 48 h on bacterial grade plates. Ti, oxygen and carbon elements were detected on all surfaces by XPS. Increased Zn signals were detected on Zn-PIIID-Ti surfaces, correlating with an increase of Zn-deposition time. Substantial numbers of S. mutans adhered to cp-Ti samples, whereas bacterial adhesion on Zn-PIIID-Ti surfaces signficantly decreased as the Zn concentration increased (p < 0.01). In conclusion, PIIID can successfully introduce Zn onto a Ti surface, forming a modified surface layer bearing Zn ions that consequently deter adhesion of S. mutans, a common bacterium in the oral environment.     

Microwave-assisted synthesis of SrFe12O19 hexaferrites

Ultra-fine and homogeneous SrFe₁₂O₁₉ hexaferrites were synthesized by a microwave-assisted calcination route. The calcined precursors were prepared by a sol-gel auto-combustion method using Fe(NO₃)₃·9H₂O, Sr(NO₃)₂ and citric acid as starting materials. The structures, powder morphology and magnetic properties of the products were characterized by X-ray diffraction, scanning electron microscope and vibrating sample magnetometer. The results showed that microwaves are helpful to reduce the calcination temperature and shorten the calcination time. The ferrites with saturation magnetization, remanence and intrinsic coercivity of 54.80 emu/g, 29.52 emu/g and 5261 Oe, respectively, were obtained in samples calcined at 800 °C for 80 min.     

矩形毛细微槽横截面上气液分界面形状理论分析

对背面有热流输入的矩形毛细微槽群横截面上的气液分界面形状进行了理论分析,在一定条件下对Wayner蒸发模型进行简化,根据等壁温条件推出蒸发薄液膜区域热流密度近似为定值,通过流体动力学理论推导出了微槽横截面薄液膜区域液膜厚度变化的关系式,并与Wayner蒸发模型的计算结果进行了比较。进一步提出了全新的交界线区域长度的判定方法,根据蒸发薄液膜区域总换热量计算得到蒸发薄液膜区域的长度,交界处接触角,以及固有弯月面区域的曲率半径,从而最终得出了微槽横截面整个气液分界面的形状曲线,理论分析表明:槽宽、热流密度、过热度等因素对蒸发薄液膜区域长度、接触角以及固有弯月面曲率半径等参数有较大的影响。     

紫外Sc_2O_3薄膜的光学和结构性能表征及其激光作用下的损伤机理

利用电子束蒸发方法,在不同沉积温度(50~350℃)下制备了Sc2O3薄膜。分别用分光光度计,小角掠入射X射线衍射仪和轮廓仪测试了薄膜样品的光谱、微结构和表面粗糙度信息,并用薄膜分析软件Essential Macleod计算了Sc2O3薄膜的折射率和消光系数。结果表明:随着沉积温度升高,Sc2O3薄膜结晶程度增强,晶粒尺寸增大,且较高的沉积温度有利于获得较高的折射率。最后用355 nm,8 ns的三倍频Nd:YAG激光器测试了其激光损伤阈值(LIDT),最大值为2.6 J/cm2,且阈值与薄膜的消光系数、表面粗糙度、光学损耗均呈现相反的变化趋势。用光学显微镜和扫描电子显微镜表征了该薄膜的破坏形貌,详细分析了薄膜在不同激光能量作用下破坏的发展过程,以及Sc2O3薄膜在355 nm紫外激光作用下LIDT与制备工艺的关系,重点分析了355 nm激光作用下薄膜的破坏机理。     

基于时间序列模型的全国30家电台收视率分析

以湖南电视台和北京卫视为代表,对全国30家电视台卫星频道2008全年日收视率进行时间序列分析,建立了四种拟合模型.其中,大部分电台收视率具有长期趋势或长期趋势和季节效应的综合影响,分别建立ARIMA模型和乘积季节模型,并进行预测,其结果表明模型拟合效果较好.