Wavefront reconstruction of Fresnel diffraction field by optical methods and digital algorithm

The experimental methods for measuring the phase distribution of Fresnel diffraction field by using interference and polarization information are given in this paper. An effective algorithm for phase retrieval under Fresnel-zone transform is also presented.     

超重核294118及其α衰变链的基态性质

用形变约束的相对论平均场理论系统研究了超重核²⁹⁴118及其α衰变链的基态性质, 给出了这些原子核的每核子结合能和α衰变能以及基态形变, 并与实验结果进行了比较, 发现理论计算和实验结果符合得很好, 表明相对论平均场理论对超重核基态性质的描述是合理有效的.     

单偏振控制器环形腔光纤激光器实验研究

理论分析了非线性偏振旋转环形腔作为类饱和可吸收体获得脉冲的物理机理。在光纤环形腔结构中,采用单个偏振控制器实现了非线性偏振旋转锁模,直接获得了脉冲宽度为131 fs的超短脉冲输出。实验中,采用性能稳定的976 nm半导体二极管激光器作为抽运源,使用高掺杂浓度的Er3 光纤为增益介质,通过调节偏振控制器,获得了光谱谱宽(3 dB带宽处)为23.5 nm的稳定锁模脉冲输出。脉冲中心波长为1535.9 nm,平均功率为5.91 mW,脉冲重复率为11.20 MHz。     

FTIR法研究氨基酸稀土配合物与磷脂的相互作用

利用傅里叶变换红外光谱（ＦＴＩＲ）法研究了不同类型氨基酸及其配合物与二棕榈酰磷脂酰胆碱脂质体浇铸膜的相互作用。结果表明，在有氨基酸存在下，二棕榈酰磷脂酰胆碱的红外谱图没有明显的变化；氨基酸稀土配合物与磷脂极性头基团有静电相互作用，作用的程度随稀土离子、氨基酸及稀土同氨基酸配比的不同而有所不同。     

蛇足石杉及其近缘种表征关系的FTIR主成分分析

蛇足石杉是一种重要药用植物,其种内变异程度高,近缘种多,植株体型小,可供鉴别性状少。运用OMNI采样器-傅里叶变换红外光谱直接测定法,获得了蛇足石杉(Huperzia Serrata)及其5个近缘种：四川石杉(Huperzia Sutchueniana)、闽浙马尾杉(Phlegmariurus Mingchegensis)、石松(Lycopodium Japonicum)、深绿卷柏(Selaginella Doederleinii)和异穗卷柏(Selaginella Heterostachys)16个叶片样品的红外光谱,以666～3 145 cm-1范围内吸收峰吸光度为指标,以红外光谱图为对象,应用主成分分析(Principal Component Analysis),比较了16个样品在红外光谱上的差异程度。发现基于傅里叶变换红外光谱的主成分分析排序图能够在一定程度上表征16个样品的分类关系。应用FTIR直接测定法能够鉴别蛇足石杉及其近缘物种。     

ZnO/A1lN/Si(111)薄膜的外延生长和性能研究

用常压金属化学气相沉积法(MOCVD)在Si(111)衬底上制备了马赛克结构ZnO单晶薄膜.引入低温AlN缓冲层以阻止衬底氧化、缓解热失配和晶格失配.薄膜双晶X射线衍射2θ/ω联动扫描只出现了Si(111)、ZnO(000l)及AlN(000l)的衍射峰.ZnO/AlN/Si(111)薄膜C方向晶格常量为0.5195 nm,表明在面方向处于张应力状态;其对称(0002)面和斜对称(1012)面的双晶X射线衍ω摇摆曲线半峰全宽分别为460"和1105";干涉显微镜观察其表面有微裂纹,裂纹密度为20 cm-1;3 μm×3μm范围的原子力显微镜均方根粗糙度为1.5 nm激光实时监测曲线表明薄膜为准二维生长,生长速率4.3μm/h.低温10 K光致发光光谱观察到了薄膜的自由激子、束缚激子发射及它们的声子伴线.所有结果表明,采用金属化学气相沉积法并引入AlN为缓冲层能有效提高Si(111)衬底上ZnO薄膜的质量.     

Membrane tube pearling induced by a coupling of osmotic pressure and nanoparticle adhesion

ABSTRACT

In this work, a coarse-grained molecular dynamics simulation method that belongs to the class of dissipative particle dynamics scheme with implicit solvent was used to indicate that adsorption of nanoparticles (NPs) inside a lipid membrane tube and pressure difference across the membrane, e.g. osmotic pressure, cooperatively induce membrane tube pearling. We demonstrate that NP adsorption and aggregation initiate the shape transformation of the lipid tube, and pressure difference provides a driving force for pearling transition. Depending on the dynamic coupling of tube shape transition and NP aggregation in the interior of the tube, different shape transitions via four kinds of pearling pathways are recognised, including pearls on a string (i.e. vesicles are interconnected via either a chain or double-chain of NPs) and tube-to-vesicle transition that is dominated kinetically either by NP-membrane attraction or by pressure difference. Considering the fact that biological membranes are semipermeable and many proteins interact with the membranes, these findings not only provide a mechanism of membrane tube pearling but also demonstrate the importance of osmotic pressure and protein–membrane interaction for many cell activities related to shape transitions of biomembrane.     

Beam-based calibrations of the BPM offset at C-ADS Injector Ⅱ

Beam-based BPM offset calibration was carried out for Injector II at the C-ADS demonstration facility at the Institute of Modern Physics(IMP), Chinese Academy of Science(CAS). By using the steering coils integrated in the quadrupoles, the beam orbit can be effectively adjusted and BPM positions recorded at the Medium Energy Beam Transport of the Injector II Linac. The studies were done with a 2 m A, 2.1 Me V proton beam in pulsed mode.During the studies, the "null comparison method" was applied for the calibration. This method is less sensitive to errors compared with the traditional transmission matrix method. In addition, the quadrupole magnet's center can also be calibrated with this method.     

Interaction mechanism between serine functional groups and single‐walled carbon nanotubes

The adsorption of serine (Ser) on the (8, 8) and (10, 0) single‐walled carbon nanotubes (CNTs) was studied by density‐functional tight‐binding calculations. For Ser, the two most stable configurations were chosen to research the interactions with the CNT. It found that the most stable Ser/(8, 8) and Ser/(10, 0) complexes have similar structures, in which the amino group, carboxyl, and side chain of serine directly interact with the CNT. The binding energies, charge transfer properties, the shortest distance (d₁) between the H atom and the corresponding benzene ring, distance (d₂) between the H atom and the center of benzene ring (HCB), and the angle (α) between the HCB line and the corresponding benzene ring plane were analyzed to explain the interactions. Because of the interaction, the ?CH of the main chain runs away from the surface of CNT, and the angles between the ?C?H bond of the main chain and the carboxyl, the amino group, and the side chain of the Ser become small. The strain energies and changes of angles and dihedral angles of the serine after adsorption were analyzed to illustrate the deformation. The interactions of Ser with the CNT were further illustrated by calculating the molecular orbitals and the partial density of states of the stable complexes. We further compared the binding energies of armchair (n, n) and zigzag (n, 0) CNTs to investigate the diameter dependence of binding energies. Copyright © 2015 John Wiley & Sons, Ltd.     

单双层共轭系统的共轭高度对等晕角的影响

 简要介绍了传统自适应光学系统的局限性和多层共轭自适应光学基本原理。模拟了单双层共轭校正系统的共轭高度,并结合平程与垂程(HV模型)两种传输状态对系统等晕角增益作了进一步的分析。对单层共轭系统,在20 km的传输距离内,在平程中整个区域都属于等晕角放大区,共轭高度的最佳位置在传输距离的中间（约10 km处）,等晕角取极大值,增益效果较好;但垂程中增益效果变差,且等晕角放大区也仅在3.6 km之内。对双层共轭系统来说,第1层共轭高度的变形镜主要对近距离畸变波前进行校正,并对整个传输距离的等晕角影响很大,是双层共轭系统的关键因素;第2层共轭高度对远距离等晕角影响较大。