SINGLE AND DOUBLE EDGE INTERFACE CRACK SOLUTIONS FOR ARBITRARY FORMS OF MATERIAL COMBINATION

In this paper interfacial edge crack problems are considered by the application of the finite element method. The stress intensity factors are accurately determined from the ratio of crack-tip-stress value between the target given unknown and reference problems. The reference problem is chosen to produce the singular stress fields proportional to those of the given unknown problem. Here the original proportional method is improved through utilizing very refined meshes and post-processing technique of linear extrapolation. The results for a double-edge interface crack in a bonded strip are newly obtained and compared with those of a single-edge interface crack for different forms of combination of material. It is found that the stress intensity factors should be compared in the three different zones of relative crack lengths. Different from the case of a cracked homogeneous strip, the results for the double edge interface cracks are found to possibly be bigger than those for a single edge interface crack under the same relative crack length.     

LOCALIZED PATTERNS OF THE CUBIC-QUINTIC SWIFT-HOHENBERG EQUATIONS WITH TWO SYMMETRY-BREAKING TERMS

Homoclinic snake always refers to the branches of homoclinic orbits \mbox{near} a heteroclinic cycle connecting a hyperbolic or non-hyperbolic equilibrium and a periodic orbit in a reversible variational system. In this paper, the normal form of a Swift-Hohenberg equation with two different symmetry-breaking terms (non-reversible term and non-k-symmetry term) are investigated by using multiple scale method, and their bifurcation diagrams are initially studied by numerical simulations. Typically, we predict numerically the existence of so-called round-snakes and round-isolas upon particular two symmetric-breaking perturbations.     

Designed Construction of SrTiO3/SrSO4/Pt Heterojunctions with Boosted Photocatalytic H2 Evolution Activity

Efficient separation of photogenerated electron–hole pairs is a crucial factor for high-performance photocatalysts. Effective electron–hole separation and migration could be achieved by heterojunctions with suitable band structures. Herein, a porous SrTiO₃/SrSO₄ heterojunction is prepared by a sol-gel method at room temperature followed by an annealing process. XRD characterization suggests high crystallinity of the heterostructure. A well-defined interface between the two phases is confirmed by high-resolution (HR)TEM. The photocatalytic H₂ evolution productivity of the SrTiO₃/SrSO₄ heterojunction with Pt as co-catalyst reaches 396.82 μmol g⁻¹ h⁻¹, which is 16 times higher than that of SrTiO₃/Pt. The boosted photocatalytic activity of SrTiO₃/SrSO₄/Pt can be ascribed to the presence of SrSO₄, which promotes the transfer and migration of photogenerated carriers by forming the heterojunction and porous structure, which provides a large amount of active sites. This novel porous heterostructure brings new ideas for the development of high-efficiency photocatalysts for H₂ release.     

离子色谱法测定护发和皂类产品中羟乙磷酸及其盐类

研究并建立了护发和皂类产品中羟乙磷酸及其盐类的离子色谱测定方法。将护发和皂类样品分散于3mmol/L盐酸中,于振荡器上振摇至完全溶解,护发和皂类样品提取液分别调节pH值至2.5和5.5,依次过尼龙滤膜和OnGuardⅡRP固相萃取柱。滤液采用离子色谱-抑制电导检测法分析测定,以IonPac AS11-HC阴离子交换色谱柱分离,40mmol/L氢氧化钾溶液为淋洗液等度洗脱,ASRS-400阴离子型抑制电导检测,外标法定量。方法的线性范围为0.5～8.0mg/L,相关系数为0.9999,对羟乙磷酸的定量限为0.025%,护发产品在低、中、高3种加标水平的回收率为84.0%～93.5%,相对标准偏差为1.3%～3.0%;皂类产品在低、中、高3种加标水平的回收率为81.4%～92.3%,相对标准偏差为1.8%～5.1%。该法准确、简便、快速,可用于护发和皂类产品的实际检测。     

Tailorable PC71BM Isomers: Using the Most Prevalent Electron Acceptor to Obtain High‐Performance Polymer Solar Cells

Despite being widely used as electron acceptor in polymer solar cells, commercially available PC₇₁BM (phenyl‐C₇₁‐butyric acid methyl ester) usually has a “random” composition of mixed regioisomers or stereoisomers. Here PC₇₁BM has been isolated into three typical isomers, α‐, β₁‐ and β₂‐PC₇₁BM, to establish the isomer‐dependent photovoltaic performance on changing the ternary composition of α‐, β₁‐ and β₂‐PC₇₁BM. Mixing the isomers in a ratio of α/β₁/β₂=8:1:1 resulted in the best power conversion efficiency (PCE) of 7.67 % for the polymer solar cells with PTB7:PC₇₁BM as photoactive layer (PTB7=poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]]). The three typical PC₇₁BM isomers, even though sharing similar LUMO energy levels and light absorption, render starkly different photovoltaic performances with average‐performing PCE of 1.28–7.44 % due to diverse self‐aggregation of individual or mixed PC₇₁BM isomers in the otherwise same polymer solar cells.     

Dark-state mechanism for the long-time transfer of excitations in a donor–acceptor system

The excitation energy transfer between a donor–acceptor pair with fixed distance apart through energy exchanging with environment is investigated. The total system is modeled as two two-level systems (TLSs) interacting with many harmonic oscillators. The pair behaves coherently or incoherently, depending on whether the dipolar coupling is stronger or weaker than the TLS–environment coupling. The environmental linear dispersion relation gives an analytical solution to the pair?s probability involving all the retardation times. We found that the long-time trapping of energy within the pair is caused by the inhibiting dark-state radiative decay when two TLSs are at half a resonant wavelength.     

Computational insight into asymmetric uranyl‐salophen coordinated with α, β‐unsaturated aldehydes and ketones

The study of the catalytic activity and activation mechanism of asymmetric uranyl‐salophens with α, β‐unsaturated aldehydes or α, β‐unsaturated ketones, is a research hotspot. In this paper, the complexes of the uranyl–salophen(U‐S) modified by unilateral benzene, coordinated with cyclohexenone, cyclopentenone and acrolein, were investigated using density functional theory calculations at the level of B3LYP/6‐311G(d, p) basis set. The results showed that the uranyl‐salophen(U‐S) weakened the large π bond between C = C and C = O of the α, β‐unsaturated aldehydes and ketones, making the unsaturated aldehydes and ketones activated. In addition, the molecular‐recognition selectivity of the asymmetrical uranyl‐salophen for cyclohexenone and cyclopentenone were much higher than for acrolein.