AIEgens in cell-based multiplex fluorescence imaging

Fluorescence imaging is an important branch of bioimaging. It is non-invasive and provides superior spatial and temporal resolution during the real-time monitoring of biological samples of interest. Although the spatial resolution limit of optical microscopes is about 200 nm, due to the diffraction limit, with the application of super-resolution fluorescence microscopy technologies this limit has been pushed below 30 nm. This makes it feasible to visualize biological structures in subcellular levels and to monitor subcellular biological processes in real time. However, due to the complexity of the biological structure and components within cells, simultaneous staining and monitoring multiple intracellular components with different coloured fluorophores is often needed during multiplex imaging, to better understand biological processes. Aggregation-induced emission luminogens(AIEgen) and AIEgen based nanoparticles(NPs) have presented many advantages in fluorescence imaging, with strong potential for biological science and nano-medicine. Herein this review, we focus on the advantages of AIEgen and AIEgen NP in cell-based fluorescence imaging, and the latest advances of AIEgens in cell-based multiplex imaging are summarized and discussed. The future perspectives are proposed.     

聚左旋乳酸/聚消旋乳酸共混物的结晶行为

非晶态聚消旋乳酸(PDLLA)对PLLA的结晶行为有较大的影响。本文利用差示扫描量热仪(DSC)和偏光显微镜(POM)对不同分子量PLLA、PDLLA按不同比例制得的共混物结晶进行了系统研究。结果表明随PDLLA含量的增大PLLA冷结晶温度升高,且越接近熔融温度。PDLLA分子量较小时PLLA球晶特征被明显破坏,PDLLA分子量较大时PLLA更易形保持球晶特征且易形成环带球晶形貌,这与结晶速率与非晶组分的扩散速率匹配程度有关。低分子量的PDLLA使PLLA的最大生长速率对应的温度出现在较低温度。     

Hydrogel-Derived Honeycomb Ni3S4/N,P-C as an Efficient Oxygen Evolution Catalyst

The development of high-efficiency electrocatalysts with low costs for the oxygen evolution reaction (OER) is essential, but remains challenging. Herein, a new synthetic process is proposed to prepare Ni₃S₄ particles embedded in N,P-codoped honeycomb porous carbon aerogels (Ni₃S₄/N,P-HPC) through a hydrogel approach. The preparation of Ni₃S₄/N,P-HPC begins with the sol–gel polymerization of tripolyphosphate, chitosan, and guanidine polymer that contains metal-binding sites, allowing for the uniform incorporation of Ni ions into the gel matrix, freeze-drying, and subsequent carbonization under an inert atmosphere. This synthesis resolves difficulties in synthesizing the pure Ni₃S₄ phase caused by the instability of Ni₃S₄ at high temperature, while affording good control of the porous structure and N,P-doping of carbon aerogels. The synergy between the structural advantages of N,P-carbon aerogels (such as easily accessible active sites, high specific surface area, and excellent electron transport) and the intrinsic electrochemical properties of Ni₃S₄ result in the outstanding OER performance of Ni₃S₄/N,P-HPC, with overpotentials as low as 0.37 V at 10 mA cm⁻². The work outlined herein offers a simple and effective method for the development of carbon-based electrocatalysts for renewable energy conversion.     

Infrared Spectroscopy of Size-Selected Hydrated Carbon Dioxide Radical Anions CO2.−(H2O)n (n=2–61) in the C−O Stretch Region

Understanding the intrinsic properties of the hydrated carbon dioxide radical anions CO₂^.−(H₂O)_n is relevant for electrochemical carbon dioxide functionalization. CO₂^.−(H₂O)_n (n=2–61) is investigated by using infrared action spectroscopy in the 1150–2220 cm⁻¹ region in an ICR (ion cyclotron resonance) cell cooled to T=80 K. The spectra show an absorption band around 1280 cm⁻¹, which is assigned to the symmetric C−O stretching vibration ν_s. It blueshifts with increasing cluster size, reaching the bulk value, within the experimental linewidth, for n=20. The antisymmetric C−O vibration ν_as is strongly coupled with the water bending mode ν₂, causing a broad feature at approximately 1650 cm⁻¹. For larger clusters, an additional broad and weak band appears above 1900 cm⁻¹ similar to bulk water, which is assigned to a combination band of water bending and libration modes. Quantum chemical calculations provide insight into the interaction of CO₂^.− with the hydrogen-bonding network.     

Catalytic Chemosensing Assay for Selective Detection of Methyl Parathion Organophosphate Pesticide

Herein, a catalytic chemosensing assay (CCA), based on a bimetallic complex, [Ru^II(bpy)₂(CN)₂]₂(Cu^II)₂ (bpy=2,2′-bipyridine), is described. This complex integrates a task-specific catalyst (Cu^I-catalyst) and a signaling unit ([Ru^II(bpy)₂(CN)₂]) to specifically hydrolyze methyl parathion, a highly toxic organophosphate (OP) pesticide. The bimetallic complex catalyzed the hydrolysis of the phosphate ester to generate o,o-dimethyl thiophosphate (DTP) anion and 4-nitrophenolate. Intrinsically, 4-nitrophenolate absorbed UV/Vis light at λ_max=400 nm, creating the first level of the chemosensing signal. DTP interacted with the original complex to displace the chromophore, [Ru^II(bpy)₂(CN)₂], which was monitored by spectrofluorometry; this was classified as the second level of chemosensing signal. By integrating both spectroscopic and spectrofluorometric signals with a simple AND logic gate, only methyl parathion was able to provide a positive response. Other aromatic and aliphatic OP pesticides (diazinon, fenthion, meviphos, terbufos, and phosalone) and 4-nitrophenyl acetate provided negative responses. Furthermore, owing to the metal-catalyzed hydrolysis of methyl parathion, the CCA system led to the detoxification of the pesticide. The CCA system also demonstrated its catalytic chemosensing properties in the detection of methyl parathion in real samples, including tap water, river water, and underground water.     

Enhanced 1T′-Phase Stabilization and Chemical Reactivity in a MoTe2 Monolayer through Contact with a 2D Ca2N Electride

Among the widely studied 2D transition metal dichalcogenides (TMDs), MoTe₂ has attracted special interest for phase-change applications due to its small 2H-1T′ energy difference, yet a large scale phase transition without structural disruption remains a significant challenge. Recently, an interesting long-range phase engineering of MoTe₂ has been realized experimentally by Ca₂N electride. However, the interface formed between them has not been well understood, and moreover, it remains elusive how the presence of Ca₂N would affect the basal plane reactivity of MoTe₂. To address this, we performed density functional theory (DFT) calculations to investigate the potential of tuning the phase stability and chemical reactivity of a MoTe₂ monolayer via interacting with Ca₂N to form a van der Walls heterostructure. We found that the contact nature at the 2H-MoTe₂/Ca₂N interface is Schottky-barrier-free, allowing for the spontaneous electron transfer from Ca₂N to 2H-MoTe₂ to make it strongly n-type doped. Moreover, Ca₂N doping significantly lowers the energy of 1T′-MoTe₂ and dynamically triggers the 2H-to-1T′ transformation. The Ca₂N-induced phase modulation can also be applied to tune the phase energetics of MoS₂ and MoSe₂. Furthermore, using H adsorption as the testing ground, we also find that the H binding on the basal plane of MoTe₂ is enhanced after forming heterostructure with Ca₂N, potentially providing basis for surface modification and other related catalytic applications.     

Tetra‐ammonium Zinc Phthalocyanine to Construct a Graded 2D–3D Perovskite Interface for Efficient and Stable Solar Cells

The crystallographic defects inevitably incur during the solution processed organic‐inorganic hybrid perovskite film, especially at surface and the grain boundaries (GBs) of perovskite film, which can further result in the reduced cell performance and stability of perovskite solar cells (PSCs). Here, a simple defect passivation method was employed by treating perovskite precursor film with a hydrophobic tetra‐ammonium zinc phthalocyanine (ZnPc). The results demonstrated that a 2D‐3D graded perovskite interface with a capping layer of 2D (ZnPc)_0.5MA_n ? 1Pb_nI_3n + 1 perovskite together with 3D MAPbI₃ perovskite was successfully constructed on the top of 3D perovskite layer. This situation realized the efficient GBs passivation, thus reducing the defects in GBs. As expected, the corresponding PSCs with modified perovskite revealed an improved cell performance. The best efficiency reached 19.6%. Especially, the significantly enhanced long‐term stability of the responding PSCs against humidity and heating was remarkably achieved. Such a strategy in this work affords an efficient method to improve the stability of PSCs and thus probably brings the PSCs closer to practical commercialization.     

Validation of a HPLC/MS method for simultaneous quantification of clonidine,morphine and its metabolites in human plasma

A high‐performance liquid chromatography–tandem mass spectrometry method was developed and validated for the simultaneous quantification of morphine, morphine's major metabolites morphine‐3‐glucuronide and morphine‐6‐glucuronide, and clonidine, to support the pharmacokinetic analysis of an ongoing double‐blinded randomized clinical trial that compares the use of morphine and clonidine in infants diagnosed with neonatal abstinence syndrome. Plasma samples were processed by solid‐phase extraction and separated on an Inertsil ODS‐3 (4 μm) column using an 0.1% formic acid in water–0.1% formic acid in methanol gradient. Detection of the analytes was conducted in the positive multiple reaction monitoring mode. The range of quantitation was 1–1000 ng/mL for morphine, morphine‐3‐glucuronide and morphine‐6‐glucuronide, and 0.25–100 ng/mL for clonidine. Intra‐day and inter‐day accuracy and precision were ≤15% for all analytes across the quantitation range. Extraction recovery rates were ≥94% for morphine, ≥90% for M3G, ≥87% for M6G and ≥ 79% for clonidine. Matrix effect ranged from 85–94% for clonidine to 101–106% for M3G. The method fulfilled all predetermined acceptance criteria and required only 100 μL of starting plasma volume. Furthermore, it was successfully applied to 30 clinical trial plasma samples.     

Organocatalytic Asymmetric One‐Step Desymmetrizing Dearomatization Reaction of Indoles: Development and Bioactivity Evaluation

An organocatalytic one‐step desymmetrizing dearomatization reaction of indoles with in situ formed vinylidene ortho‐quinone methides is reported. A set of [6‐6‐5] and/or [5‐6‐5] fused indoline heterocycles were obtained in excellent yields with excellent diastereoselectivities (>20:1 d.r.) and enantioselectivities (up to 99 % ee). Moreover, some of the obtained products were screened against a panel of cancer cell lines, and one was identified to inhibit the proliferation of all the tested cancer cells, but showed marginal effects against non‐cancerous cells. The methodology provides a platform for the synthesis of new leading compounds with antitumor activity.     

Colloidal Synthesis and Charge‐Carrier Dynamics of Cs2AgSb1−yBiyX6 (X: Br,Cl; 0 ≤y ≤1) Double Perovskite Nanocrystals

A series of lead‐free double perovskite nanocrystals (NCs) Cs₂AgSb_1?yBi_yX₆ (X: Br, Cl; 0≤y≤1) is synthesized. In particular, the Cs₂AgSbBr₆ NCs is a new double perovskite material that has not been reported for the bulk form. Mixed Ag–Sb/Bi NCs exhibit enhanced stability in colloidal solution compared to Ag–Bi or Ag–Sb NCs. Femtosecond transient absorption studies indicate the presence of two prominent fast trapping processes in the charge‐carrier relaxation. The two fast trapping processes are dominated by intrinsic self‐trapping (ca. 1–2 ps) arising from giant exciton–phonon coupling and surface‐defect trapping (ca. 50–100 ps). Slow hot‐carrier relaxation is observed at high pump fluence, and the possible mechanisms for the slow hot‐carrier relaxation are also discussed.