柔性PDA薄膜阵列用于双模光学检测VOC标志物气体

本研究以亲油性的双面胶作为基底,利用滴涂二乙炔单体结合紫外光聚合来制备均匀的聚二乙炔(PDA)薄膜,通过荧光和颜色两种信号变化模式(即"双模光学检测")研究了PDA薄膜对VOC气体的响应性,发现制备的PDA薄膜在2 min内就可以实现明显的荧光和颜色变化,有效解决了目前PDA薄膜在VOC气体检测方面存在响应速度慢、薄膜均一性差等问题.此外,为解决单一PDA薄膜的交叉响应性问题,本研究制备了四种不同的基于双面胶基底的PDA薄膜,并将制备的4种PDA薄膜集成到一片PDMS薄膜基底上来构建柔性的传感阵列,利用阵列的颜色变化结合模式识别技术,实现了对8种VOC气体的快速、灵敏区分.进一步将制备的PDA薄膜阵列用于健康人、模拟糖尿病及肾病患者呼出气体中VOC标志物的辨别和分析研究,发现可以将三类人的呼出气体清晰地区分,说明了该阵列在呼气疾病诊断中的应用前景.与目前报道的PDA薄膜阵列相比,本研究中基于双面胶基底的PDA薄膜阵列具有气体响应速度快、灵敏性高、柔韧性好、制备工艺简单、成本低、易于大规模制备等优点,有望用于实VOC气体检测研究中.     

Understanding energetic disorder in electron-deficient-core-based non-fullerene solar cells

Recent advances in material design for organic solar cells(OSCs) are primarily focused on developing near-infrared nonfullerene acceptors, typically A-DA′D-A type acceptors(where A abbreviates an electron-withdrawing moiety and D, an electron-donor moiety), to achieve high external quantum efficiency while maintaining low voltage loss. However, the charge transport is still constrained by unfavorable molecular conformations, resulting in high energetic disorder and limiting the device performance. Here, a facile design strategy is reported by introducing the "wing"(alkyl chains) at the terminal of the DA′D central core of the A-DA′D-A type acceptor to achieve a favorable and ordered molecular orientation and therefore facilitate charge carrier transport. Benefitting from the reduced disorder, the electron mobilities could be significantly enhanced for the"wing"-containing molecules. By carefully changing the length of alkyl chains, the mobility of acceptor has been tuned to match with that of donor, leading to a minimized charge imbalance factor and a high fill factor(FF). We further provide useful design strategies for highly efficient OSCs with high FF.     

Fe/Co‐based Bimetallic MOF‐derived Co3Fe7@NCNTFs Bifunctional Electrocatalyst for High‐Efficiency Overall Water Splitting

Electrocatalytic water splitting to produce hydrogen and oxygen is regarded as one of the most promising methods to generate clean and sustainable energy for replacing fossil fuels. However, the design and development of an efficient bifunctional catalyst for simultaneous generation of hydrogen and oxygen remains extremely challenging yet is critical for the practical implementation of water electrolysis. Here, we report a facile method to fabricate novel N‐doped carbon nanotube frameworks (NCNTFs) by the pyrolysis of a bimetallic metal organic framework (MIL‐88‐Fe/Co). The resultant electrocatalyst, Co₃Fe₇@NCNTFs, exhibits excellent oxygen evolution reaction (OER) activity, achieving 10 mA/cm² at a low overpotential of just 264 mV in 1 M KOH solution, and 197 mV for the hydrogen evolution reaction. The high electrocatalytic activity arises from the synergistic effect between the chemistry of the Co₃Fe₇ and the NCNTs coupled to the novel framework structure. The remarkable electrocatalytic performance of our bifunctional electrocatalyst provides a promising pathway to high‐performance overall water splitting and electrochemical energy devices.     

In-plane Operating Deflection Shape Measurement of an Aluminum Plate Using a Three-dimensional Continuously Scanning Laser Doppler Vibrometer System

Background

In-plane vibration is significant to a structure and has been accurately solved by many numerical methods; however, there are still not enough studies on its experimental measurement.

Objective

This work aims to propose a non-contact and fast way to measure dense full-field in-plane vibration of a plate structure, which has high frequencies and low response magnitudes.

Methods

A novel three-dimensional (3D) continuously scanning laser Doppler vibrometer (CSLDV) system that contains three CSLDVs is developed to conduct full-field scanning of a plate with free boundary conditions under sinusoidal excitation to measure its 3D vibrations. Calibration among the three CSLDVs in the 3D CSLDV system based on the geometrical model of its scan mirrors is conducted to adjust their rotational angles to ensure that three laser spots can continuously and synchronously move along the same two-dimensional scan trajectory on the plate. The demodulation method is used to process the measured response to obtain in-plane operating deflection shapes (ODSs) of the plate.

Results

Four in-plane ODSs are obtained in the frequency range of 0–5000 Hz. Modal assurance criterion (MAC) values between in-plane ODSs from 3D CSLDV and step-wise scanning laser Doppler vibrometer (SLDV) measurements are larger than 95%. MAC values between ODSs from 3D CSLDV measurements and corresponding mode shapes from the finite element model of the plate are larger than 91%.

Conclusions

Results from 3D CSLDV measurements have good accuracy compared to those from SLDV measurements and numerical calculation, and the 3D CSLDV system can scan much more measurement points in much less time than the SLDV system.

     

基于车桥耦合理论的梁式桥阻尼比识别研究

提出一种基于车桥耦合动力学理论的梁式桥阻尼比识别方法. 首先按照动力学理论将测试车设计为单自由度体系, 然后利用安装在测试车上的传感器采集信号, 从测试车与桥梁接触点响应信号中得到梁式桥响应的信号, 基于车桥耦合动力学原理滤波处理得到包含梁式桥第一阶频率的信号, 最后假定梁式桥阻尼比值, 通过假定的梁式桥阻尼比值获取假定的梁式桥第一阶振型, 不断循环直至假定的阻尼比值下计算的第一阶振型最大值点居中, 即为识别的梁式桥真实阻尼比. 本文首先从车桥耦合动力学理论推导上说明了该方法的可行性, 然后考虑在不同车速与非恒定车速、路面粗糙度、环境噪音等影响因素下进行车桥耦合动力学模型分析, 最后通过实桥试验进行了初步验证. 研究结果表明: 该方法能一定程度上克服外界不利因素的影响, 达到识别梁式桥阻尼比的目的, 为识别梁式桥阻尼比提供一种更优方法, 其具有参数设置较少、操作简单方便以及更高测试精度等优点, 同时有助于推动基于车桥耦合的车桥耦合动力学理论技术在梁式桥模态参数识别工作中的实际工程应用.      

Nonlinear singular traveling waves in a slightly compressible thermo-hyperelastic cylindrical shell

Nonlinear Dynamics - In this paper, we present a novel methodology for nonlinear dynamic analysis of chemical processes that are posed as differential–algebraic equations (DAE) systems. With...     

基于非齐次复合Poisson过程的正交异性钢桥面板细节疲劳裂纹随机扩展研究

传统的正交异性钢桥面板疲劳损伤评估常采用确定性和可靠性分析方法,忽略了疲劳裂纹扩展的随机性影响,针对这一问题,提出钢桥面板细节疲劳随机扩展分析方法。本文以南溪长江大桥为工程背景,基于长期车辆荷载监测数据,建立了车辆荷载非齐次复合Poisson过程模型。建立钢桥面板有限元模型,采用瞬态分析方法将随机车辆荷载转化成细节疲劳应力,基于线弹性断裂力学理论推导U肋-顶板焊接细节疲劳裂纹扩展时变微分方程,实现宏观关系式疲劳应力幅次数-疲劳损伤至微观表达式应力时间序列-疲劳损伤转换,讨论了车载次序及超载对疲劳裂纹扩展的影响。研究结果表明,非齐次复合泊松过程模型能够较好描述随机车流运营状态,车辆荷载的次序对疲劳裂纹扩展速率的影响不可忽略,重车排序靠前时能够促使疲劳裂纹扩展增速,南溪长江大桥细节点的车辆超载迟滞效应修正系数取值0.804。     

Piecewise Continuous Almost Automorphic Functions and Favard’s Theorems for Impulsive Differential Equations in Honor of Russell Johnson

Journal of Dynamics and Differential Equations - We define piecewise continuous almost automorphic (p.c.a.a.) functions in the manners of Bochner, Bohr and Levitan, respectively, to describe almost...     

An environmentally benign benzylic oxidation catalyzed by hypervalent iodine intermediate in water

An effective and environmentally benign benzylic oxidation for transition of alkylarenes into the corresponding carbonyl compounds was reported.Alkylarenes were mixed and stirred with potassium bromide,m-chloroperbenzoic acid and a catalytic amount of iodobenzene in water at 60 8C for several hours,a series of the corresponding carbonyl compounds was obtained in moderate to good yields.In the reaction,iodobenzene was first oxidized by m-chloroperbenzoic acid into the hypervalent iodine intermediate which then reacted with potassium bromide to form the key radical initiator for the benzylic oxidation.     

Beam dynamics studies on BEPC-Ⅱstorage rings at the commissioning stage

During the 1st and 2nd stages of the commissioning of the upgrade project of the Beijing Electron Positron Collider(BEPC Ⅱ),which started on Nov.12,2006 and Oct.24,2007,respectively,we got the luminosity one tenth of its design value,provided beams to synchrotron radiation users for about 4 months,and studied beam dynamics as well.In this paper,some beam dynamics studies on the storage rings and their preliminary results are given.