高中化学优质教学案例中教材分析的现状研究及分析模型建构*

以核心期刊《化学教育》2018-2021年高中化学教学设计及实施类文献为研究对象,在较完备的教材分析视角指引下,采用内容分析法研究优质教学案例中教材分析的现状及特点,在此基础上构建教材分析模型,探索优质教学案例的设计路径。     

Nanoscale imaging of oxidized copper foil covered with chemical vapor deposition-grown graphene layers

Characterization of the geometrical and structural characteristics of oxidized Cu area in high resolution is crucial for tracking the change in morphology, exploring interactions between graphene layers and Cu substrates and revealing the mechanism for the orientation-dependent oxidation of Cu. Here, we reported experimental results on nanoscale imaging of natural oxidation of the polycrystalline Cu substrate coated by partial-coverage chemical vapor deposition (CVD)-grown graphene stored in dryer under ambient conditions for up to 10 months. Scanning electron microscope (SEM), together with atomic force microscope (AFM), Raman, and X-ray photoelectron spectroscopy (XPS), was used for systematically studying the morphological and compositional changes at nanoscale during oxidation. The appearance of oxidized Cu substrates could be unambiguously distinguished from the unoxidized regions based on their distinctly different morphologies in SEM images, and the underlying mechanism was discussed in detail. By analyzing a millimeter-seized polycrystalline Cu substrate, we found that the oxidation of polycrystalline Cu substrate depends sensitively on both orientation of graphene layers and Cu substrates. Furthermore, the time-dependent oxidation evolution of Cu substrate was also established, and the oxidation rate was readily determined. The findings reported here will have important implications for developing protection coatings for Cu.     

Gamma spectrum analysis for in situ automatic monitoring of radioactivity in seawater

The NaI(Tl) detector has been an important research topic and application in the field of in situ marine radioactive automatic monitoring because of its advantages of low power consumption, low cost, and good efficiency. However, its energy resolution is not high enough. This paper investigated an analytical method: spectrum de-noising, background correction based on the SNIP operator, peak search based on the top-hat transform and peak fitting using Gaussian distribution. Simulation and gamma spectra measured from seawater showed that the established energy spectrum analysis method presents satisfactory automatic analytical ability for identification and quantitatively analysis.

     

A Furan-based Phosphaphenanthrene-containing Derivative as a Highly Efficient Flame-retardant Agent for Epoxy Thermosets without Deteriorating Thermomechanical Performances

In order to reduce greenhouse gas emissions, developing flame retardants from bio-based resources has aroused extensive interest in recent years. In this work, we utilized furfural(biomass) and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide(DOPO) to synthesize a biobased co-curing agent(FGD) to combine with 4,4'-diaminodiphenyl methane(DDM) for obtaining a low-phosphorus loading flame-retardant epoxy thermosets. The introduction of FGD decreased the activation energy of the curing progress, enhanced the mechanical properties of the epoxy thermosets, and did not affect the glass transition temperature of the epoxy thermosets. EP-5.0 had a lower thermal degradation rate and a doubled char yield compared with EP-0. The phosphorus content of EP-5.0 was only 0.45 wt%, while EP-5.0 reached the UL-94 V-0 rating with a high LOI value of 32%. Compared with EP-0, the PHRR of EP-2.5 and EP-5.0 decreased by 22.3% and 31.3%, respectively. The SEM results showed that the addition of FGD made the char residues more uniform and denser, which could effectively prevent combustible volatiles from escaping from the degradation area to the flame area and isolate the heat transfer so that the epoxy thermosets had an excellent flame-retardant performance.     

Simulation of nuclide migration in a middle- and low-level radioactive waste repository based on GMS

Journal of Radioanalytical and Nuclear Chemistry - Groundwater is the most important factor contributing to the diffusion and migration of radionuclides in the repository. In this paper, the...     

Phenylethynyl-terminated Imide Oligomers Modified by Reactive Diluent for Resin Transfer Molding Application

To meet the processing requirements of resin transfer moulding(RTM)technology,reactive diluent containing m-phenylene moiety was synthesized to physically mixed with phenylethynyl terminated cooligoimides with well-designed molecular weights of 1500-2500 g/mol derived from 4,4’-(hexafluoroisopropylidene)diphthalic anhydride(6 FDA),3,4’-oxydianiline(3,4’-ODA)and m-phenylenediamine(m-PDA).This blend shows low minimum melting viscosity(<1 Pa·s)and enlarged processing temperature window(260–361℃).FPI-R-1 stays below 1 Pa·s for2 h at 270℃.The relationship between the molecular weight of the blend and its melting stability was first explored.Blending oligoimides with lower molecular weights exhibit better melting stability.Upon curing at 380℃for 2 h,the thermosetting polyimide resin demonstrates superior heat resistance(T_g=420-426℃).     

The new synthesis of sulfuryl-bridged triazinane and its selective recognition to SO42−

Research on Chemical Intermediates - A new method has been developed for the synthesis of a cage-like sulfuryl-bridged triazinane molecule HEXS by acidic condensation of a glycoluril analog with...     

过渡金属催化合成含氮杂环化合物的研究进展

含氮杂环化合物是一类非常重要的有机杂环化合物,也是有机合成化学的研究热点之一。本文首先简要介绍了含氮杂环化合物在天然产物、合成药物和功能材料中的分布及其广泛应用;然后以不同过渡金属催化剂为线索,按照时间由远至近的顺序分别概述了Pd、Ag、Fe、Ni、Zn、Cu等六类过渡金属催化剂在合成五、六元含氮杂环化合物方面的研究进展,对反应条件、反应特征进行了概括;最后对含氮杂环化合物合成领域的过渡金属催化剂的整体发展趋势进行了归纳总结。     

铋基钙钛矿(CH3NH3)3Bi2I9薄膜的制备及在光伏电池中的应用

铋基钙钛矿由于稳定性强及毒性低,被认为是未来极具发展潜力的环保型钙钛矿材料。(CH₃NH₃)₃Bi₂I₉(MBI)因具有优异的光吸收性能而引起人们的普遍关注。本文介绍了MBI钙钛矿晶体的结构及性能,总结了其薄膜的制备方法,并重点叙述了不同方法制备的MBI钙钛矿薄膜在光伏电池中的应用情况。MBI钙钛矿与铅基钙钛矿的效率相比还有很大差距,如何提高其光电转换效率仍是今后研究的主要方向。