痕量铜的合并带法流动注射分析——Fe~(3+)-S_2 O_3~(2-)-Cu~(2+)催化体系

本文基于 Cu~(2+)对三价铁离子与硫代硫酸盐反应生成深紫蓝色物质的褪色反应的催化作用采用流动注射合并带技术,建立了痕量铜(Ⅱ)的快速分析方法。方法的线性范围在0～350μg/L 检出限为10μg/L,相对标准偏差为1.68％,进样频率可达100样次/小时,具有很高的选择性。     

贮氢材料电极循环寿命的定量预测定时放电半衰期法的应用

贮氢材料电极循环寿命的定量预测定时放电半衰期法的应用韩剑文，袁满雪，周作祥，赖城明（南开大学化学系天津３０００７１）关键词：贮氢电极，循环寿命，半衰期。前文￣［１］讨论了应用定终点电位放电半衰期法来预测贮氢材料电极循环寿命的问题。本文讨论如何采用定时...     

简法合成甲地孕酮

本文报道了合成甲地孕酮的简便方法,即以17α-乙酰氧基-黄体酮(3)为原料,将其烯醇醚(4)经Mannich反应,或将△~(3,5)-3,17α-二乙酰氧基-黄体酮(2)与二乙氧基甲烷反应,生成6-次甲基-17α-乙酰氧基-黄体酮(5),然后将5用钯/碳酸钙作催化剂转位得目的物甲地孕酮(6b),总收率分别为56%和50%(均以17α-羟基-黄体酮(1)为起始物)。     

硼化合物的研究XX:乙醇胺合三(2-呋喃基)硼烷的合成及其转化

2-呋喃基锂与(N,N-二乙胺基)二氯硼烷的反应是以三烃基化的方式发生,因而可用于制取三(2-呋喃基)硼烷,并可以得到乙醇胺配合物1的稳定形式。乙醇胺合三(2-呋喃基)硼烷(1)可在稀酸中游离出三(2-呋喃基)硼烷,可与吡啶形成吡啶合三(2-呋喃基)硼烷2;化台物1中的呋喃环被8-羟基喹啉或8-羟基喹哪啶裂开以后,分别形成含 B-N 内配键的二呋喃基硼螯合物3及4。化合物1～4均经元素分析及有关波谱鉴定。     

Low temperature catalytic conversion of methane to methanol by barium sulfate nanotubes supporting sulfates: Pt(SO4)2, HgSO4, Ce(SO4)2 and Pb(SO4)2

Barium sulfate nanotubes perform excellently in supporting sulfates (Pt(SO4)2, HgSO4, Ce(SO4)2 and Pb(SO4)2) for low temperature catalytic conversion of methane to methanol under strongly acidic conditions in a conventional gas-phase reactor.     

Preparation of [5,6]- and [6,6]-oxahomofullerene derivatives and their interconversion by Lewis acid assisted reactions of fullerene mixed peroxides

[60]Fullerene mixed peroxides C60(O)(OOtBu)4 exhibit chemo- and regioselective reactions under mild conditions. The epoxy moiety is opened by ferric chloride to form vicinal hydroxy chloride C60Cl(OH)(OOtBu)4. BF3 is also effective in opening the epoxy moiety. The O-O bond of the fullerene mixed peroxide is cleaved by aluminum chloride to form both [5,6]- and [6,6]-fullerene hemiketals (oxohomo[60]fullerenes). A Hock-type rearrangement is proposed for the formation of the hemiketals, in which a fullerene C-C bond is cleaved. Lewis acids and/or visible light can initiate isomerization of the hemiketal isomers. Single-crystal X-ray analysis and theoretical calculations confirmed the results.     

Low-temperature growth and photoluminescence property of ZnS nanoribbons

At a low temperature of 450 degrees C, ZnS nanoribbons have been synthesized on Si and KCl substrates by a simple chemical vapor deposition (CVD) method with a two-temperature-zone furnace. Zinc and sulfur powders are used as sources in the different temperature zones. X-ray diffraction (XRD), selected area electron diffraction (SEAD), and transmission electron microscopy (TEM) analysis show that the ZnS nanoribbons are the wurtzite structure, and there are two types-single-crystal and bicrystal nanoribbons. Photoluminescence (PL) spectrum shows that the spectrum mainly includes two parts: a purple emission band centering at about 390 nm and a blue emission band centering at about 445 nm with a weak green shoulder around 510 nm.