Dispersion Mechanism of Superfine SiC Particles in the Different Condition Liquid

SiC@A1(OH)₃-Y(OH)₃ core-shell composite particles are synthesized by co-precipitation method for strengthening the antioxidation of SiC at high temperature. To reach better A1(OH)₃-Y(OH)₃ composite shell and higher coating ratio on the SiC particles surfaces, SiC particles must be adequately dispersed in the SiC suspension during the coating process. The dispersion mechanism of SiC particles is investigated by the sedimentation method. Through test and analysis, the optimum conditions of the dispersion of SiC particles in the SiC suspension are sedimentating for 10 minutes, ultrasonic dispersion for 10 minutes, the lower SiC concentration, pH = 9, the dispersant content for the 2% volume of SiC suspension and using the polyelectrolyte dispersant, respectively.     

Optical and Electronic Properties of Different Kinds of Water‐Soluble Porphyrin Films

Water‐soluble porphyrin‐porphyrin and porphyrin‐CdSe nanoparticle monolayer films were self‐assembled on different substrates. The influence of substrates, types of films, and heat treatment temperature on fluorescence of different kinds of porphyrin films was investigated. The SEM images showed the formation of monolayer films on porous alumina foil. The films assembled on porous alumina foil possessed higher fluorescence intensity and thermal stability. The result of conductance measurement indicated that the interaction of trimethylamidophenylporphyrin iodide (TAPPI) molecules with hydroxyl groups on porous alumina foil was weakened after CdSe nanoparticles assembled with TAPPI.     

PMAA microgel surface-supported phase transfer catalyst as reusable microreactors for ultra-deep desulfurization

The reusable microreactors, poly(methacrylic acid) (PMAA) microgels surfacely covered with 3-(trimethoxysilyl)-propyldimethyloctadecyl ammonium chloride (AEM) and K₂{W(=O)(O₂)₂(H₂O)}₂ (W2) complexes, have been synthesized by using an ion exchange reaction between AEM located on PMAA microgels and W2 in aqueous solution. The final composite microspheres and intermediate products are characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, energy dispersive X-ray spectrophotometer, and thermogravimetric analysis, respectively. The results indicated the PMAA/AEM/W2 composite microspheres with surface-wrinkling morphology and core-shell structure. The feasibility of the composite microspheres used as reusable microreactors in catalytic oxidation of dibenzothiophene (DBT) was investigated. Additionally, the effects of some factors, including the amount of the microreactors, temperature, H₂O₂/DBT molar ratio, the loaded amount of AEM, DBT concentration, and recycling times, on the catalytic oxidation were examined. The results demonstrated that the prepared composite microspheres possess high catalytic performance and reusability in the catalytic oxidation of DBT.     

Transition metal-free synthesis of primary amides from aldehydes and hydroxylamine hydrochloride

Primary aromatic amides can be synthesized from aldehydes and hydroxylamine hydrochloride in the presence of Cs₂CO₃. Various aromatic aldehydes (include some heteroaromatic aldehydes) are able to generate the corresponding aromatic amides in moderate to excellent yields.     

Concise synthesis of aromatic tertiary amines via a double Petasis–borono Mannich reaction of aromatic amines,formaldehyde, and organoboronic acids

A simple and efficient strategy to construct aromatic tertiary amines via a double Petasis–borono Mannich reaction of aromatic amines, formaldehyde, and organoboronic acids has been developed. The transformation provides a useful method for the synthesis of amine derivatives.     

Synthesis and application of moisture-stable methallylsilanated phosphorylcholine as a surface modifier

New methallylsilanated phosphorylcholine (MASPCs) were synthesized via a copper-catalyzed ‘click’ reaction and demonstrated excellent moisture stability. Hydroxylated silicon compounds, silanol, and silica were grafted or modified by MASPCs in the presence of triflic acid (TfOH) and they possessed a good grafting efficiency and high loading rate.     

Enantioselective Reduction of Prochiral Ketones with NaBH4/Me2SO4/(S)-Me-CBS

The enantioselective reduction of prochiral ketones with NaBH₄/Me₂SO₄/(S)-Me-CBS is described. Borane is generated in situ via the reaction of NaBH₄ with Me₂SO₄ in tetrahydrofuran, which is as efficient as the commercial one. Such in situ–generated borane reagent was applied to reduce prochiral ketones in the presence of chiral oxazaborolidine catalyst directly. The corresponding chiral secondary alcohols were obtained with excellent enantiomeric excesses (93–99% ee) and good to excellent yield (80–99%).     

A Furan-based Phosphaphenanthrene-containing Derivative as a Highly Efficient Flame-retardant Agent for Epoxy Thermosets without Deteriorating Thermomechanical Performances

In order to reduce greenhouse gas emissions, developing flame retardants from bio-based resources has aroused extensive interest in recent years. In this work, we utilized furfural(biomass) and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide(DOPO) to synthesize a biobased co-curing agent(FGD) to combine with 4,4'-diaminodiphenyl methane(DDM) for obtaining a low-phosphorus loading flame-retardant epoxy thermosets. The introduction of FGD decreased the activation energy of the curing progress, enhanced the mechanical properties of the epoxy thermosets, and did not affect the glass transition temperature of the epoxy thermosets. EP-5.0 had a lower thermal degradation rate and a doubled char yield compared with EP-0. The phosphorus content of EP-5.0 was only 0.45 wt%, while EP-5.0 reached the UL-94 V-0 rating with a high LOI value of 32%. Compared with EP-0, the PHRR of EP-2.5 and EP-5.0 decreased by 22.3% and 31.3%, respectively. The SEM results showed that the addition of FGD made the char residues more uniform and denser, which could effectively prevent combustible volatiles from escaping from the degradation area to the flame area and isolate the heat transfer so that the epoxy thermosets had an excellent flame-retardant performance.     

Neutral 1D Perovskite-Type ABX3 Phase Transition Material with a Narrowband Emission and Semiconductor Property

Cyclic organic amines are emerging as excellent building blocks to assemble organic–inorganic hybrid phase transition materials due to their flexible cyclic structure. Here, we have assembled a 1D organic-inorganic hybrid dielectric material C₅H₆NOPbBr₃ ( 1 ) by alloying the cyclic organic amine 3-hydroxypyridine. 1 displays a remarkable switchable dielectric response induced by an order-disorder transformation of the organic moiety, this transformation behaviour is confirmed by DSC and Hirshfeld surface measurements. More interestingly, 1 has a narrowband emission (FWHM=4.64 nm) at 590 nm; FWHM is a major quality figure for narrowband photodetectors. In addition, 1 exhibits semiconducting properties with an indirect bandgap of 2.78 eV by the analysis of the UV-Vis absorption results.     

Switch From Pauli-Lowering to LUMO-Lowering Catalysis in Brønsted Acid-Catalyzed Aza-Diels-Alder Reactions

Brønsted acid-catalyzed inverse-electron demand (IED) aza-Diels-Alder reactions between 2-aza-dienes and ethylene were studied using quantum chemical calculations. The computed activation energy systematically decreases as the basic sites of the diene progressively become protonated. Our activation strain and Kohn-Sham molecular orbital analyses traced the origin of this enhanced reactivity to i) “Pauli-lowering catalysis” for mono-protonated 2-aza-dienes due to the induction of an asynchronous, but still concerted, reaction pathway that reduces the Pauli repulsion between the reactants; and ii) “LUMO-lowering catalysis” for multi-protonated 2-aza-dienes due to their highly stabilized LUMO(s) and more concerted synchronous reaction path that facilitates more efficient orbital overlaps in IED interactions. In all, we illustrate how the novel concept of “Pauli-lowering catalysis” can be overruled by the traditional concept of “LUMO-lowering catalysis” when the degree of LUMO stabilization is extreme as in the case of multi-protonated 2-aza-dienes.