非等电子Sb替换Cu和Te后黄铜矿结构半导体Cu_3Ga_5Te_9的热电性能

热电材料是一类能够实现热与电相互转换的功能材料,在制冷和发电领域极具应用潜力.本文采用金属Sb元素非等电子替换Cu3Ga5Te9化学式中的Cu和Te,观察到材料Seebeck系数和电导率提升的现象.这些电学性能的改善与载流子浓度和有效质量的增大及迁移率基本维持不变有关.载流子浓度的提高是由于Sb原子占位在Te晶格位置后费米能级进入到价带所产生的空穴掺杂效应所致,同时也与Cu含量减少后铜空位(V-1Cu)浓度增大相关联.另外,非等电子替换后,阴离子(Te2-)移位导致了晶格结构缺陷参数u和η的改变,其改变量fiu和fiη与材料晶格热导率(κL)的变化密切相关.在766 K时,适量的Sb替换量使材料的最大热电优值(ZT)达到0.6,比Cu3Ga5Te9提高了近25%.因此,通过选择替换元素、被替换元素及替换量有效地调控了材料的电学及热学性能,在黄铜矿结构半导体中实现了非等电子元素替换改善热电性能的思想.     

在溴代十六烷基吡啶存在下5-Br-PADAP分光光度法测定水中微量铁的研究

研究了显色剂2-(5-溴-2-吡啶偶氮)-5-二乙氨基酚(简称为5-Br-PADAP)与铁(Ⅱ)显色反应条件,在pH=6.0的醋酸-醋酸钠缓冲体系中,采用阳离子表面活性剂溴代十六烷基吡啶增溶增敏。铁(Ⅱ)与显色剂形成的配合物组成为Fe(Ⅱ)∶R=1∶2,络合物具有两个吸收峰,分别位于λ1=556nm与λ2=748nm。选择748nm进行测定,其摩尔吸光系数为ε748=3.3×104L·mol-1·cm-1。铁含量在0—30μg/25mL范围内服从比耳定律。此法用于水样中微量铁的测定,结果准确可靠。     

93.7 W 1112 nm diode-side-pumped CW Nd:YAG laser

We demonstrate a high power continuous wave (CW) infrared laser operated at 1112 nm from a diode side-pumped Nd:YAG crystal with a plano-plano symmetrical resonator. By inserting an etalon, an output power of as high as 93.7 W at 1112 nm was obtained at the pump power of 570 W with conversion efficiency of 16.4%. The beam quality factor of M² was measured to be about 17. The wavelength tunable performance of the etalon was also analyzed. To the best of our knowledge, it is the highest output power at 1112 nm CW laser based on Nd:YAG crystal.     

Directional terahertz radiation through groove-assisted hole array

The authors theoretically demonstrate the terahertz beam shaping with metallic subwavelength holes array surrounded by concentric periodic grooves. High transmission and directional radiation can be obtained simultaneously for the resonant excitation of the surface wave in the combined structure. Finite-difference time-domain simulation results shows that the transmission mainly depends on the lattice constant of hole array and the features of incident surface around it, while the far-field angle distribution is dominated by the details of the output surface. This compact beam shaping structure is hoped to serve as a basic device for future terahertz systems.     

A new solvent suppression method via radiation damping effect

Radiation damping effects induced by the dominated solvent in a solution sample can be applied to suppress the solvent signal. The precession pathway and rate back to equilibrium state between solute and solvent spins are different under radiation damping. In this paper, a series of pulse sequences using radiation damping were designed for the solvent suppression in nuclear magnetic resonance (NMR) spectroscopy. Compared to the WATERGATE method, the solute signals adjacent to the solvent would not be influenced by using the radiation damping method. The one-dimensional (1D) ¹H NMR, two-dimensional (2D) gCOSY, and J-resolved experimental results show the practicability of solvent suppression via radiation damping effects in 1D and 2D NMR spectroscopy.     

一种检测低浓度化学需氧量的双波长光谱方法

提出了一种基于双波长光谱法快速测定低污染水样的化学需氧量(COD)的方法.结果表明:对低COD样品采用440和560 nm双波长的测定方法可有效地提高可靠性和检测灵敏性.该法的灵敏度(即定量检测下限)为8.6 mg·L-1;在低COD范围标样(≤100mg·L-1)的准确性对比测定相对标准误差在2%～15%的范围内.另外,该方法不需要用标准样品进行校正,可以通过光谱法检测消解液中重铬酸根的消耗直接计算出样品的COD值,使实验步骤得到了进一步的简化.     

Li2O-B2O3-P2O5系统非晶态混合骨架效应的NMR研究

用核磁共振对非晶态中B³⁺离子的微观结构进行了测定,结合Raman光谱的研究,对Li₂O-B₂O₃-P₂O₅系统非晶态的性能(电导率、密度等)在P₂O₅/B₂O₃比约等于1时产生极值的原因从理论上作了阐明。     

两种二茂铁甲基二氧大环多胺的电化学性质

利用循环伏安法对我们新设计合成的两种二茂铁甲基二氧大环多胺化合物——１－二茂铁甲基－１,４,８,１１－四氮杂环十三烷－５,７－二酮（简称ＦｃＣＨ２Ｌ１）和１－二茂铁甲基－１,４,７,１１,１４－五氮杂环十六烷－３,１５－二酮（简称ＦｃＣＨ２Ｌ２）——的电化学性质进行了研究,包括酸碱度的影响以及它们对Ｚｎ２＋,Ｃａ２＋,Ｃｄ２＋,Ｃｕ２＋,Ｎｉ２＋,Ｃｏ２＋等金属离子的电化学响应情况．在乙醇和水的混合溶剂体系中化合物ＦｃＣＨ２Ｌ１对Ｎｉ２＋具有选择性络合,而化合物ＦｃＣＨ２Ｌ２对高氧化态的Ｎｉ３＋有稳定作用     

计算机上的抽象算符演算系统

本文在REDUCE语言环境下,利用公理化方法建立了一个“抽象算符演算”系统.使REDUCE系统可用于抽象的算符演算,逆演算;用于Laplace变换,逆变换及解微分方程,推导公式,以及验证有关定理等.     

Testing Lack-of-fit for a Polynomial Errors-in-variables Model

When a regression model is applied as an approximation of underlying model of data, the model checking is important and relevant. In this paper, we investigate the lack-of-fit test for a polynomial error-in-variables model. As the ordinary residuals are biased when there exist measurement errors in covariables,we correct them and then construct a residual-based test of score type. The constructed test is asymptotically chi-squared under null hypotheses. Simulation study shows that the test can maintain the significance level well.The choice of weight functions involved in the test statistic and the related power study are also investigated.The application to two examples is illustrated. The approach can be readily extended to handle more general models.