Improved electrochemical performance of LiNi0.5Mn1.5O4 as cathode of lithium ion battery by Co and Cr co-doping

Three samples, LiNi_0.5Mn_1.5O₄, LiNi_0.4Mn_1.4Co_0.2O₄, and LiNi_0.4Mn_1.4Cr_0.15Co_0.05O₄, were prepared by sol–gel method and characterized by powder X-ray diffraction, Fourier transformed infrared spectroscope, scanning electron microscopy, Brunauer–Emmett–Teller surface area, four-probe resistance, cyclic voltammetry, electrochemical impedance spectroscopy, and charge–discharge test. It is found that the co-doped sample LiNi_0.4Mn_1.4Cr_0.15Co_0.05O₄ exhibits an improved performance compared with the Co-doped sample LiNi_0.4Mn_1.4Co_0.2O₄ and the undoped sample LiNi_0.5Mn_1.5O₄, especially at elevated temperature. At 25 °C, the discharge capacity of LiNi_0.4Mn_1.4Cr_0.15Co_0.05O₄ is 130 mAh g^?1 at 0.1 C and 103 mAh g^?1 at 10 C. At an elevated temperature (55 °C), its 1 C discharge capacity is 136 mAh g^?1 and maintains 95.6 % of its initial capacity after 100 cycles. Compared with the reported results of LiNi_0.4Mn_1.4Co_0.2O₄ and LiNi_0.475Mn_1.475Co_0.05O₄, the co-doped sample LiNi_0.4Mn_1.4Cr_0.15Co_0.05O₄, with least content of Co, 0.05, possesses not only the high C-rate capacity but also the structural stability. The mechanism on the electrochemical performance improvement of LiNi_0.5Mn_1.5O₄ by the co-doping was discussed.     

The oxygen sensitive properties of (LaBa)Co2O5+δ thin films fabricated by polymer-assisted deposition technique

(LaBa)Co₂O_5+δ (LBCO) thin films were successfully fabricated on Si (001) substrates by polymer-assisted deposition method. Microstructures were examined by X-ray diffraction technique, which confirmed the films were a single phase, pseudo cubic structure. The electrical transport properties of the films were investigated by the temperature dependence of films resistance, which suggested that LBCO films have typical semiconductor properties. After circle tests, the oxygen–hydrogen response rate did not show obvious variation in the specific temperature environment of 580 °C. This demonstrates that the LBCO thin films have a superior stability in both oxygen and hydrogen (6 % H₂, 94 % N₂) environment. Simultaneously, the drastic changes of films resistance (from ~10⁶ to ~10² Ω) with the switch of redox (O₂–H₂) environment within such a short time (~2.2 s) indicated that LBCO films have an excellent oxygen sensitive property and extraordinary fast surface exchange rate.     

Effect of emulsification processes on the stability of Pickering emulsions stabilized by organomontmorillonites

In this paper, effect of emulsification processes on the properties of Pickering emulsions stabilized by organomontmorillonites (OMts) was studied. Results of micro-morphology and X-ray diffraction showed that the structure of OMt in emulsion depended on the emulsification processes and had an effect on the stability of emulsion. We propose a schematic diagram to reveal the relationship between emulsification processes-OMt laminates structure-stability of Pickering emulsion. In emulsion prepared by ultrasonic, OMt showed uniform dispersion, loose structure, and irregular crystalline. In emulsion prepared by vortex mixing method, OMt illustrated stacking and coagulation structure. In emulsion prepared by microwave method, OMt showed interacting structure and had a little interaction with oil/water interface, and thus the properties of emulsion prepared by microwave was weakly related to oil/water ratios. Emulsification processes had a profound effect on the structure of OMt and stability of Pickering emulsion, which can be used as a trigger to prepare emulsion for various applications.     

Novel graphene oxide/bentonite composite for uranium(VI) adsorption from aqueous solution

A novel graphene oxide/bentonite composite (GO/bentonite) was synthesized and then characterized through powder X-ray diffraction, fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, and energy dispersive spectroscopy. Adsorption achieved equilibrium within 10 min. Moreover, U(VI) adsorption on GO/bentonite was highly dependent on solution pH and independent of ionic strength. These characteristics suggested that inner-sphere surface complexes of U(VI) formed on GO/bentonite. The adsorption of U(VI) from aqueous solution on GO/bentonite was fitted to the pseudo-second-order and Freundlich isotherm models. The maximum sorption capacity of GO/bentonite was 234.19 mg g^?1 under neutral pH at 303 K. GO/bentonite is a potentially powerful adsorbent for the efficient removal of U(VI) from aqueous solutions.     

Experimental Evidence for a Triboluminescent Antiperovskite Ferroelectric: Tris(trimethylammonium) catena‐Tri‐μ‐chloro‐manganate(II) Tetrachloromanganate(II)

The perovskite structure is rich in ferroelectricity. In contrast, ferroelectric antiperovskites have been scarcely confirmed experimentally since the discovery of M₃AB‐type antiperovskites in the 1930s. Ferroelectricity is now revealed in an organic–inorganic hybrid X₃AB antiperovskite structure, which exhibits a clear ferroelectric phase transition 6/mmmF6mm with a high Curie point of 480 K. The physical properties across the phase transition are obviously changed along with the symmetry requirements, providing solid experimental evidence for the ferroelectric phase transition. More interestingly, the discovered antiperovskite shows intense photoluminescence and triboluminescence properties. The confirmation of the triboluminescent ferroelectric antiperovskite will open new avenues to explore excellent optoelectronic properties in the antiperovskite family.     

Design,synthesis and evaluation of a novel fluorescent probe to accurately detect H2S in lysosomes

A novel H₂S-responsive fluorescent probe Rh-Lyso-H₂S has been designed and synthesized. The Rh-Lyso-H₂S shows high sensitivity and selectivity toward H₂S, with a limit of detection of 3.36?×?10^?7?M. The reason is that Rh-Lyso-H₂S changed from a stable non-conjugated closed-ring lactone conformation with weak fluorescence to a conjugated open-ring conformation with strong fluorescence in the presence of H₂S. The Rh-Lyso-H₂S has a good lysosome-targeting capacity and is used to detect lysosomal H₂S in living cells, which is driven via the protonation of its basic morpholine moiety by acidic lysosomes. Rh-Lyso-H₂S is triggered by H₂S via removing the thiophenecarboxylate group, and the corresponding activated mechanism of Rh-Lyso-H₂S toward H₂S is proposed.     

CO<Subscript>2</Subscript>-responsive Polymeric Fluorescent Sensor with Ultrafast Response

Abstract Response speed is one of the most important evaluation criteria for CO₂ sensors. In this work, we report an ultrafast CO₂ fluorescent sensor based on poly[oligo(ethylene glycol) methyl ether methacrylate]-b-poly[N,N-diethylaminoethyl methacrylate-r-4-(2-methylacryloyloxyethylamino)-7-nitro-2,1,3-benzoxadiazole] [POEGMA-b-P(DEAEMA-r-NBDMA)], in which DEAEMA units act as the CO₂-responsive segment and 4-nitrobenzo-2-oxa-1,3-diazole (NBD) is the chromophore. The micelles composed of this copolymer could disassemble in 2 s upon CO₂ bubbling, accompanying with enhanced fluorescence emission with bathochromic shift. Furthermore, the quantum yield of the NBD chromophore increases with both the CO₂ aeration time and the NBD content. Thus we attribute the fluorescent enhancement to the inhibition of the photo-induced electron transfer between unprotonated tertiary amine groups and NBD fluorophores. The sensor is durable although it is based on “soft” materials. These micellar sensors could be facilely recycled by alternative CO₂/Ar purging for at least 5 times, indicating good reversibility.     

人体内酮体检测技术的研究进展

论述了检测人体内酮体浓度的重要意义和酮体的代谢过程，对各种检测技术的发展过程、检测原理、操作步骤及各自的优缺点进行了比较分析，着重探讨了对血液中β-羟丁酸的检测，并对各种技术的发展方向作了进一步的展望。     

Determination of Enantiomeric Purity of GSK962040 Based on Liquid Chromatography Using Chiral Stationary Phase Combined with a Pre-column Derivatization Procedure

A sensitive and accurate LC method was developed and further validated for the determination of enantiomeric purity of GSK962040. Before separation, a pre-column derivatization procedure was performed. Baseline separation with a resolution higher than 1.9 was accomplished within 15 min using a Chiralpak AD-H (250 × 4.6 mm; particle size 5 μm) column, with n-hexane: 2-propanol (85:15 v/v) as mobile phase at a flow rate of 1 mL min^?1. The eluted analytes were subsequently detected with a UV detector at 260 nm. The effects of mobile phase components and temperature on enantiomeric selectivity as well as resolution of enantiomers were thoroughly investigated. The calibration curves were plotted within the concentration range between 4 and 200 μg mL^?1 (n = 8), and recoveries between 98.15 and 101.48% were obtained, with relative standard deviation (RSD) lower than 1.42%. The LOD and LOQ for the Boc-GSK962040 were 1.23 and 4.15 μg mL^?1 and for its enantiomer were 1.38 and 4.76 μg mL^?1, respectively. The developed method was also evaluated and validated by analyzing bulk samples with different enantiomeric ratios of GSK962040. It was demonstrated that the method was accurate, robust and sensitive, and also had practical utilities for real analysis.