Compact Mode Converter System for the Cold Test of Assembled Gyrotrons

A microwave system is described which allows testing of the quasi-optical mode converter in a gyrotron, which is completely assembled except for the attachment of the electron gun. Test results are presented for a TE_6,2,1 gyrotron, and a similar design for a TE_28,7,1 gyrotron is shown.     

Enhanced fatigue property of PZT thin films using LaNiO3 thin layer as bottom electrode

A highly (100)-oriented metallic LaNiO₃ film was prepared directly on a Si substrate by a simple metalorganic decomposition (MOD) technique using lanthanum nitrate and nickel acetate as the starting sources. Subsequent Pb(Zr,Ti)O₃ (PZT) thin films deposited on the LaNiO₃-coated Si substrate were obtained by a modified sol–gel method. It was found that the PZT thin films began to form a single perovskite phase at a low annealing temperature of 530 °C, and exhibited highly (100) orientation. A ferroelectric capacitor of Pt/Pb(Zr,Ti)O₃/LaNiO₃/Si annealed at 600 °C displayed a good P-E hysteresis characteristic and was fatigue-free even after 10¹¹ switching cycles. Received: 25 May 2000 / Accepted: 9 August 2000 / Published online: 30 November 2000     

Thermal performance of sintered miniature heat pipes

 Investigation has been carried out on the thermal performance of sintered miniature heat pipes with 3 mm outer diameter. In the theoretical analysis, the influence of wick structure parameters is determined by using the theory of capillary limitation. As a result, the degree of importance is found to be as follows: porosity, powder diameter and thickness of wick structure. In the experiments, heat pipes with sintered dendritic copper powder wicks were fabricated and tested. The maximum heat transfer rate is about 13 W with an effective heat pipe length of 20 cm. By adopting the formulae developed for both sintered spherical powder and fiber and adjusting their proportion, the agreement between experimental results and prediction is found to be quite good in the tested operation temperature range. Received on 26 February 2001     

GUIDING OF PLASMA BY ELECTRIC FIELD AND MAGNETIC FIELD

The relationship between the transported ion current and the cathodic arc current is determined in a vacuum arc plasma source equipped with a curved magnetic filter. Our results suggest that the outer and inner walls of the duct interact with the plasma independently. The duct magnetic field is a critical factor of the plasma output. The duct transport efficiency is to maximize at a value of bias plate voltage in the range +10 V to +20 V, and independent (within our limit of measurement) of the magnetic field strength in the duct. The plasma flux is composed of two components: a diffusion flux in the transverse direction due to particle collisions, and a drift flux due to the ion inertia. The inner wall of the magnetic duct sees only the diffusion flux while the outer wall receives both fluxes. Thus, applying a positive potential to the outer duct wall can reflect the ions and increase the output current. Our experimental data also show that biasing both sides of the duct is more effective than biasing the outer wall alone.     

Low frequency effects of surface states on 4H—SiC metal—semiconductor field effect transistor

The process-related surface state effect is investigated the fabrication of SiC devices, and a nonllnear model for 4H-SiC power metal-semiconductor field effect transistor (MESFET) is propose, which takes into account the surface related parameters. The frequency-and temperature-dependent transconductance dispersion is readily demonstrated in terms of the improved model. Simulation results show that larger dispersion and higher transition frequency occur in 4H-SiC MESFET than in GaAs MESFET. The advantage of this analytical model over the two-dimensional numerical simulation is the simplicity of calculations, therefore it is suitable for the processing improvement of SiC devices     

Theoretical investigation of incomplete ionization of dopants in uniform and ion-implanted 4H-SiC MESFETs

The effects of incomplete ionization of nitrogen in 4H-SiC have been investigated. Poisson's equation is numerically analysed by considering the effects of Poole--Frenkel, and the effects of the potential on $N^+_\dd$ (the concentration of ionized donors) and $n$ (the concentration of electrons). The pinch-off voltages of the uniform and the ion-implanted channels of 4H-SiC metal-semiconductor field-effect transistors (MESFETs) and the capacitance of the gate are given at different temperatures. Both the Poole--Frenkel effect and the potential have influence on the pinch-off voltage $V_{\rm p}$ of 4H-SiC MESFETs. Although the $C$-$V$ characteristics of the ion-implanted and the uniform channel of 4H-SiC MESFETs have a clear distinction, the effects of incomplete ionization on the $C$-$V$ characteristics are not significant.     

Mode correlation and coherent-mode decomposition of laser beams

Theory of the coherent-mode decomposition of laser beams is proposed. The new model for the flat-topped beams proposed by Li recently is taken as an example. The analytical expressions for the M^2-factor and mode coherence coefficients of flat-topped beams have been derived in the rectangular coordinate system, by means of which the mode correlation, mode structure, and coherent-mode decomposition of flat-topped beams can be analysed.     

计算液态混合物内能和内压的统计热力学理论

假定二元液态混合物分子间的相互作用势能可以表示成多体相互作用势能的和,分子间的力为短程力,相互作用势能只与分子间的相对距离有关.利用分布函数理论导出了二元液态混合物的过剩内能和内压的公式.二元液态混合物的过剩内能和内压可以表示成体积的幂级数形式,其中的系数可以用多体相互作用势和多体径向分布函数表出.讨论了单元液体的内压和过剩内能的表达式,在两种特殊情形下,过剩内能和内压的表达式分别与Egelstaff的微扰论结果及Frank的实验结果具有相同的形式.讨论了二元混合物内压和内能的两个特例,其一,在特殊情形下,给出了混合液体过剩内能的混合规则的一个证明.其二,给出的二元混合物的过剩内能和内压的表达式与Frank的实验结果具有相同的形式.     

低密度溶液中溶剂的重组织性质

分析了溶液的微观结构,结果表明,单个溶质粒子影响其周围的溶剂的结构,溶质粒子间的相互作用也将影响溶剂的结构,溶质对溶剂结构的影响称作溶剂的重组织.提出了二阶重组织能及二阶重组织熵等概念,可以描述在两个溶质粒子发生碰撞时对其周围溶剂结构的影响.利用二元系的集团展开理论,给出了溶剂的一阶、二阶重组织能和重组织熵的表达式.统计热力学分析给出了溶剂-溶剂径向分布函数与溶质和溶剂化学势之间的关系,给出了无限稀溶液模型是否成立的宏观判据.提出的理论可用于低密度的二元溶液.     

Removal and recovery of copper (II) ions by bacterial biosorption

Studies were conducted toinvestigate the removal and recovery of copper (II) ions from aqueous solutions by Micrococcus sp., which was isolated from a local activated sludge process. The equilibrium of copper biosorption followed the Langmuir isotherm model very well with a maximum biosorption capacity (q_max) of 36.5 mg of Cu²⁺/gofdry cell at pH 5.0 and 52.1 mg of Cu²⁺/g of dry cell at pH 6.0. Cells harvested at exponential growth phase and stationary phase showed similar biosorption characteristics for copper, Copper uptake by cells was negligible at pH 2.0 and then increased rapidly with increasing pH un til 6.0. In multim etal systems, Micrococcus sp. exhibited a preferential biosorption order: Cu−Pb>Ni−Zn. There is virtually no interference with copper uptake by Micrococcus sp. from solutions bearing high concentrations of Cl⁻, SO ₄ ²⁻ , and NO3/− (0–500 mg/L). Sulfuric acid (0.05 M) was the most efficient desorption medium, recovering >90% of the initial copper sorbed. The copper capacity of Micrococcus sp. remained unchanged after five successive sorption and desorption cycles. Immobilization of Micrococcus sp. in 2% calcium alginate and 10% polyacrylamide gel beads increased copper uptake by 61%. Biomass of Micrococcus sp. may be applicable to the development of potentially cost-effective biosorbent for removing and recovering copper from effluents.