Template-assisted assembly: scanning tunneling microscopy study of solvent-dependent adlattices of alkyl-derivatized tetrathiafulvalene

The self-assembly of an adsorbate as a function of the strength of solvent-substrate adsorption is an important yet relatively unexplored subject. In this study, how the strength of solvent-substrate adsorption and solvent-solvent attraction affects the assembly of tetrakis(octadecylthio)tetrathiafulvalene (1) is scrutinized by scanning tunneling microscopy (STM). For solvents with strong intermolecular interactions and adsorption onto graphite, such as long n-alkanes (C(n)H(2n+2), n ≥ 13), STM reveals that the solvent molecules form lamellae which become a template to direct the assembly of 1 into one-dimensional arrays. The lengths of one of the unit cell vectors for the assemblies are increased and well correlated with the solvent sizes. In situ STM monitoring of 1 introduced onto graphite with preadsorbed n-tetradecane adlattices shows that the developed assemblies of 1 have striped features aligned parallel to the underlying template. In contrast, for solvents with weak adsorption, such as short n-alkanes (C(n)H(2n+2), n ≤ 12), toluene, and 1,2,4-trichlorobenzene, the adlattice structures of 1 are solvent-independent.     

利用Diels-Alder反应构建桉烷类倍半萜骨架关键中间体的研究

以3-甲基-1,3-间苯二酚和异戊醛为原料分别合成亲双烯2-甲氧基-6-甲基对苯醌和双烯1-甲氧基-3-异丙基-1,3-丁二烯,通过Diels-Alder反应,高区域选择性地得到桉烷类倍半萜骨架中间体2c.     

Aqueous phase synthesis of palladium tripod nanostructures for sonogashira coupling reactions

In this work, palladium tripod nanocrystals have been synthesized by mixing an aqueous solution of cetyltrimethylammonium bromide (CTAB) surfactant, Na(2)PdCl(4), copper acetate, and ascorbic acid at 30 °C for 3 h. Addition of a small amount of copper ion source is critical to the formation of these tripods with a pod length reaching 100 nm. The incorporation of Cu atoms into the Pd tripods has been verified. The entire Pd tripod is single-crystalline with their branches growing along the [111] and [200] directions. Formation of side branches can be observed in some tripods. Triangular nanoplates are initially formed and evolved into the tripod structure in 20-30 min of reaction. Further growth leads to elongation of the pods. The large Pd tripods can serve as active and recyclable catalysts for a broad range of Sonogashira coupling reactions in water using a variety of aromatic halides containing electron-donating and -withdrawing substituents.     

A new dual immunoassay for tumor markers based on chemiluminescence signal amplification by magnetic mesoporous silica and enzyme modified gold nanoparticles

A sensitive dual immunoassay was proposed for the determination of carcinoembryonic antigen (CEA) and α-fetoprotein (AFP) based on signal amplification. Monoclonal antibodies immobilized on magnetic mesoporous silica particles (Fe(3)O(4)/SiO(2)) were prepared as the primary probe. Horseradish peroxidase (HRP) labeled antibodies co-coated with HRP on gold nanoparticles (AuNPs) were used as the secondary probe to achieve signal amplification. HRP tags were retained in the flow cells after a sandwich immunoassay. By controlling two switches on the two channels, chemiluminescent substrates were injected orderly man way, and then signals for CEA and AFP were sequentially detected by HRP-luminol-H(2)O(2). Due to the increased amount of HRP on AuNPs and the increased amount of monoclonal antibodies on Fe(3)O(4)/SiO(2), the signals were largely amplified. Under the optimal conditions, CEA and AFP could be detected in the linear ranges of 1.0 - 80 and 1.0 - 75 ng mL(-1) with detection limits of 0.25 and 0.5 ng mL(-1), respectively.     

不同氮流量制备Mn3CuNx薄膜及其电、磁输运性质的研究

采用对靶磁控溅射方法在单晶Si(100)基片上制备了反钙钛矿结构的Mn₃CuN_x薄膜.通过控制制备过程中的反应气体氮气(N₂) 流量(N₂/Ar+N₂), 研究了氮含量对Mn₃CuN_x薄膜结构及物理性能的影响.分别利用X射线衍射仪、俄歇电子能谱、 原子力显微镜、X射线光电子能谱、物理性能测试系统和超导量子干涉仪, 对所制备薄膜的晶体结构、成分、表面形貌和电、磁输运性质进行了测试.结果表明:制备的薄膜均为反钙钛矿立方结构,且沿 (200) 晶面择优生长.随着氮含量的增大,薄膜表面粗糙度和颗粒度尺寸逐渐增大, 导致电阻率增加.氮含量对薄膜的电输运性质没有影响,所有薄膜电阻率均随着温度的降低逐渐增大, 呈现半导体型导电行为,这与对应的块体材料结果相反.Mn₃CuN_x薄膜随着测试温度的增大发生了 亚铁磁到顺磁的磁转变,且N含量的增大降低了磁有序转变温度,主要是由于N缺陷对Mn₆N八面体结构中 磁交换作用的影响所致.     

风浪因素对海洋波导雷达回波作用机理的研究

采用文氏谱模型描述近海海洋动力环境海面的粗糙特征, 并运用海浪谱理论得到风速和均方根高度偏差的关系. 进而应用修正的离散混合傅里叶变换方法和改进的雷达散射系数模型分别计算了电磁波传输损耗和雷达散射系数. 在此基础上, 通过数值计算分析了风浪因素对海洋波导环境雷达回波功率值的影响. 结果表明, 风浪因素对不同观测高度处的传输损耗的影响均不大; 风浪因素对雷达回波功率有显著影响, 并且相对于传输损耗, 雷达散射系数项受风浪因素影响较大因而导致较大的雷达回波功率的变化.     

环境气体种类对激光烧蚀粒子速度劈裂的影响

采用蒙特-卡罗(Monte Carlo)方法, 模拟了激光烧蚀粒子输运动力学过程, 在环境气体压强为100 Pa的情况下, 研究了环境气体种类(He, Ne, Ar和假想气体等)对烧蚀粒子速度劈裂的影响. 研究结果表明, 在四种环境气体中传输的烧蚀粒子均出现了速度劈裂现象, 形成速度劈裂所需时间按He, Ne, 假想气体和Ar的次序减小. 还研究了环境气体分子的质量和半径对烧蚀粒子速度劈裂的影响, 形成速度劈裂所需时间随环境气体分子半径(或质量)增大而减小. 在假想气体中, 两速度峰强度相等时的强度最小. 结合欠阻尼振荡模型和惯性流体模型, 对劈裂的形成时间进行了解释. 所得结论可为进一步定量研究纳米晶粒生长机理提供基础.     

碱土和过渡金属掺杂NdAlo3导电陶瓷的制备、结构与电性能研究

采用有机凝胶法结合后期高温烧结制备了较为致密的六方钙钛矿结构Nd0．9Sr0．1Al1-xO3—δ（M=Co,Fe,Mn;X=0,0．15,0．3,0．5）系列陶瓷,详细研究了过渡金属元素及掺杂量对其结构特征和电性能的影响．结果表明,凝胶前驱体在900。C焙烧5h可制得结晶良好且粒径较为细小的钙钛矿结构精细粉体,陶瓷体的晶格参数随过渡金属含量z的增加而增大,且按Co,Mn,Fe顺序递增;所有陶瓷样品在空气气氛中都是氧离子与电子空穴的混合导体,碱土金属Sr单掺杂NdAlo3的氧离子迁移数由500℃时的0．32单调增加到850℃时的0．63,其电导率随温度的升高由以电子电导为主逐渐转变为以离子电导为主;而Sr与过渡金属共掺杂样品的氧离子迁移数均在0．001以下,其电导率主要取决于P型电导,且随X的增加而增大,并按Mn,Fe,Co顺序递增,相应活化能的变化刚好与之相反,在所制备的样品中Nd0．9Sr0．1Al0．5Co0.5O3—δ具有最高的电导率（800℃时达到100．8S／cm）和最低的表观活化能（0．135eV）．在结构和电性能上所观察到的这些变化行为可根据掺杂过渡金属Co,Fe,Mn的离子半径及其金属一氧（M-O）键的键能和共价性的不同来进行解释．     

高斯光束经圆形光阑衍射的远场发散特性

线偏振高斯光束经圆形光阑衍射后,其远场可表示成互相正交的横电(TE)项和横磁(TM)项之和。利用TE项和TM项的远场能流分布,导出了高斯衍射光束的TE项和TM项远场功率的解析表达式,由此可度量TE项和TM项在远场占总功率的比例。基于能流二阶矩的定义,给出了高斯衍射光束、TE项和TM项远场发散角的解析式以及三者远场发散角间的关系通式,重点分析了f参数和截取参数对远场发散角的影响。结果表明:随着f参数的增大,远场发散角先增大后趋向于各自的饱和值。截取参数对远场发散角的影响与f参数相关,当f参数较大时,截取参数对远场发散角的影响不明显;当f参数适中时,随着截取参数的增大,远场发散角先减小后趋向于各自的最小值;但当f参数较小时,高斯衍射光束和TM项二者的远场发散角出现一定的波动性。     

采用密度泛函理论研究二甲基胺-二苯甲酮的分子内电荷转移激发态氢键

利用(含时)密度泛函理论研究了二甲基胺-二苯甲酮(DMABP)及其氢键二聚物DMABP-MeOH的光物理性质和弛豫动力学过程. 结果表明,在非极性和非质子性溶剂中,DMABP分子的第一和第二激发态跃迁同时具有局域激发和分子内电荷转移的特征;在极性质子性溶剂中,分子间氢键C=O…H-O的形成增加了这两个最低激发态之间的能量差,使DMABP-MeOH的第一激发态具有较强极性的分子内电荷转移特性. 通过计算DMABP和DMABP-MeOH分子的激发态构型弛豫势能曲线研究了激发态动力学弛豫过程. 结果表明,通过扭