Influence of Light Scattering by Residual Alumina Nanoparticles on the Analysis of Surfactants Adsorption Using Spectroscopy

The adsorption of a surfactant mixture, based on an anionic surfactant, sodium dodecyl benzenesulfonate (SDBS) and a nonionic surfactant (Triton X-100, or TX100), on alumina nanoparticles was determined by solution depletion method combined with spectrometric measurement. It is shown that the light scattering, originated from the residual adsorbent alumina particles in the supernatant after centrifugation separation, interferes with the measurements of absorbance of the surfactant molecules, and therefore constitutes an error source for determination of the surfactant concentration in the supernatant by spectrometric means. The intensity of this light scattering, namely the influence of the residual alumina nanoparticles upon the surfactant adsorption, was related to the surfactant adsorption and its equilibrium concentration and varied among a batch. In this paper we report a Kalman filter method in order to eliminate the variational scattering background caused by non-separated residual alumina nanoparticles in each supernatant. This method is of interest as it is simple, easy to carry out and of high precision.     

Conjugated enynes as a new type of substrates for olefin metathesis

[reaction: see text] It has been demonstrated for the first time that conjugated enynes can be employed as a facile substrate in olefin metathesis with the use of a bispyridine-substituted ruthenium benzylidene catalyst. Cross-metathesis of the enynes with alkenes turns out to proceed with preferential formation of (Z)-isomers over (E)-isomers up to >25:1 in moderate to good yields. The intramolecular version of conjugated enynes affords novel butadienyl cycloalkenes, which are a highly useful synthetic building blocks, in acceptable yields.     

Determination of Cr(III) and Cr(VI) in environmental waters by derivative flame atomic absorption spectrometry using flow injection on-line preconcentration with double-microcolumn adsorption

The species of Cr(III) and Cr(VI) in water samples were determined by flow injection on-line preconcentration and separation on two-microcolumn system-derivative flame atomic absorption spectrometry during a collaborative analysis for certification. The Cr(III) and Cr(VI) in water samples were retained on two microcolumns with ion exchange resin and were eluted directly to nebulizer by 15% HNO³ and 8% NH⁴NO³, respectively. The characteristic concentration (at the sensitivity grade of 2 mV min^?1 for 1 min of preconcentration time) for Cr(III) and Cr(VI) were 0.130 and 0.0985 μg l^?1, in the order which were 332- and 431-fold better than those of FAAS, and 45- and 47-fold better than those of FI-FAAS, respectively. The relative standard deviations were 3.27% and 3.66% with corresponding detection limits (3σ) of 0.244 and 0.235 μg l^?1, respectively. The linear ranges of determinations for Cr(III) and Cr(VI) were 0～100 μgm l^?1 with correlation coefficients of 0.9984 to 0.9996. The satisfactory recovery of 94.4%～106% for Cr(III) and Cr(VI) could be obtained from water samples.     

Combined investigation of experimental characterization and theoretic calculation on the structure of dextran-Fe3O4 clusters

Dextran-Fe₃O₄ hybrid clusters were fabricated by coprecipitating ferric and ferrous ions in the presence of dextran, and after characterization of these clusters combined with calculation based on classical nucleation theory, a structure model of these hybrid clusters was proposed. The hybrid cluster was believed including small Fe₃O₄ nanoparticles and dextran which acted as both nucleating agent and stabilizer, so that exist in both the inside of magnetite nanoparticles and the periphery of the hybrid clusters. Besides, the effects of W_CD (weight_{iron cation}:weight_dextran) and molecular weight of dextran on the size, morphology and magnetic property of clusters were also investigated in this paper. It was found that the variation of W_CD and molecular weight of dextran have great effect on the size of the hybrid clusters, but have almost no effect on the size of the Fe₃O₄ nanoparticles. The characterization of magnetic property demonstrated that the Fe₃O₄ nanoparticles are of a single domain and the saturation magnetization was affected by the size of dextran-Fe₃O₄ hybrid clusters.     

Resveratrol derivatives potently induce apoptosis in human promyelocytic leukemia cells

Resveratrol has been shown to possess antioxidant and anticancer activities, but little is known on the effect of resveratrol derivatives. Recently we have isolated resveratrol and its dimers and trimers from peony (Paeonia lactiflora) seeds, and reported their strong antioxidant and cytotoxic activity. In the present study, we have evaluated cellular effects of resveratrol derivatives; viniferin, gnetin H, and suffruticosol B on the proliferation and apoptosis in HL-60 cells in vitro. All resveratrol and its derivatives reduced viability of HL-60 cells in a dose-dependent manner with their IC(50) values of 20-90 microM. Ascending orders of IC(50) values were suffruticosol B, gnetin H, viniferin and resveratrol respectively. HL-60 cells treated with the four stilbenes exhibited the distinct morphological changes characteristics of cell apoptosis such as chromatin condensation, apoptotic bodies, and DNA fragmentations. A time-dependent histogram of the cellular DNA analyzed by flow cytometry revealed a rapid increase in subdiploid cells and a concomitant decrease in diploid cells exposed to 100 microM resveratrol for 0-24 h. Cells treated with 25 microM of resveratrol, viniferin, gnetin H, and suffruticosol B for 24 h resulted in increment of sub-G1 population by 51, 5, 11 and 59%, respectively. Treatment of cells with 0-20 microM resveratrol for 5 h produced a concentration-dependent decrease in cytochrome P450 (CYP) 1B1 mRNA levels. Suffruticosol B also suppressed CYP1B1 gene expression. These results demonstrated that resveratrol oligomers also strongly suppressed HL-60 cell proliferation, and induced DNA damage. In addition, CYP1B1 gene supression may suggest an involvement in the resveratrol-induced apoptosis in HL-60 cells.     

Novel titanium complexes of a multidentate dicarbollide ligand. Synthesis and structural characterization of a constrained geometry complex

The multidentate dicarbollide ligand nido-7,8-(NMe2CH2)2-7,8-C2B9H11 has been prepared, structurally characterized, and employed in the preparation of the novel mono- and trimetallic titanium complexes [eta5:eta1-(NMe2CH2)C2B9H9CH2NMe2]Ti(NMe2)2 and [eta5:eta1-[(NMe2CH2)C2B9H9CH2NMe2]Ti(NMe2)]2-mu3-O-Ti(NMe2)2.     

Sensitivity of methyl thiolate desulfurization selectivity to reaction temperature and hydroxyl coverage

The adsorption and reaction of methanethiol (CH3SH) and dimethyl disulfide (CH3SSCH3) on Mo(110)-(1 x 6)-O have been studied using temperature-programmed reaction spectroscopy and reflection-absorption infrared spectroscopy over the temperature range of 110-550 K. The S-H bond is broken upon adsorption to form adsorbed OH, water, and methyl thiolate (CH3S-) at low temperature. Water is evolved at 210 and 310 K via molecular desorption and disproportionation of OH, respectively. Some hydroxyl remains on the surface up to 350 K. Methyl thiolate is also formed from CH3SSCH3 on Mo(110)-(1 x 6)-O. Methyl thiolate undergoes C-S cleavage above 300 K, yielding methane and methyl radicals. There is also a minor amount of nonselective decomposition leading to the formation of carbon and hydrogen. Methane production is promoted by adsorbed hydroxyl. As the hydroxyl coverage increases, the yield of methyl radicals relative to methane diminishes. Accordingly, there is more methane produced from methanethiol reaction than from dimethyl disulfide, since S-H dissociation in CH3SH produces OH. The maximum coverage of the thiolate is approximately 0.5 monolayers, based on the amount of sulfur remaining after reaction measured by Auger electron spectroscopy. In contrast to cyclopropylmethanethiol (c-C3H5CH2SH), for which alkyl transfer from sulfur to oxygen is observed, there is no evidence for transfer of the methyl group of methyl thiolate to oxygen on the surface. Specifically, there is no evidence for methoxy (CH3O-) in infrared spectroscopy or temperature-programmed reaction experiments.     

Syntheses and Crystal Structures of Two Metal Succinates Modified by Bipyridines

Two new metal succinates modified by rigid bipyridines, Cd(4, 4′‐bpy)(C₄H₄O₄)·1/4H₂O ( 1 ) and Cu(2, 2′‐bpy)(C₄H₄O₄)_0.5(NO₃)(H₂O) ( 2 ) (bpy = bipyridine), have been synthesized by hydrothermal reactions and structurally determined. Complex 1 crystallizes in the orthorhombic space group Cmca with the cell parameters a = 11.696(2), b = 15.554(2), c = 15.874(3) Å, α = β = γ = 90.00°, V = 2888(3) ų, Z = 8. Complex 2 crystallizes in the triclinic space group with a = 7.077(1), b = 9.838(2), c = 10.461(2) Å, α = 71.941(3)°, β = 73.078(3)°, γ = 74.502(3)°, V = 649.8(2) ų, Z = 2. In complex 1 , a 2‐D network was formed by Cd‐succinato bonding. The 2‐D networks are pillared by 4, 4′‐bpy ligands, forming a 3‐D grid framework. The 2‐fold interpenetration of the resulting 3‐D frameworks completes the molecular structure. In complex 2 , the Cu^II atom adopts a distorted octahedral in which the Cu^II atoms are bridged by two H₂O molecules into an infinite zigzag chain, [Cu₂(H₂O)₂(C₄H₄O₄)]_n. The neighboring chains are further linked by π‐π stacking interactions into a 2‐D network, and the interlayer hydrogen bonds lead to the final 3‐D crystal structure.