Effects of in situ plasma treatment on optical and electrical properties of index-matched transparent conducting oxide layer

We investigated the effects of in situ plasma-treatment on optical and electrical properties of index-matched indium tin oxide (IMITO) thin film. To render the IMITO-coated surface hydrophilic and study the optical and electrical characteristics, we performed in situ oxygen plasma post-treatment without breaking vacuum. The 94.6% transmittance in the visible wavelength range (400-700 nm) increased on average to 96.4% and the maximum transmittance reached 98% over a broad wavelength range. The surface roughness and sheet resistance improved from 0.9 nm and 200 Ω/sq to 0.0905 nm and 100 Ω/sq, respectively, by in situ plasma post-treatment. We confirmed by contact angle measurement that the hydrophobic IMITO surface was altered to hydrophilic. The improved optical and electrical characteristics of in situ plasma-treated IMITO makes it adequate for high-resolution liquid crystal on silicon displays.     

In situ deposition behavior of silica-based layers and its effect on thermal degradation of IN713 turbine blades during operation of a micro-gas turbine

This study examined the in situ deposition behavior of silica-based layers on IN713 turbine blades during the operation of a 13 kgf-class gas turbine at a rotation speed of 20,000/min as well as its effect on the degradation of the metallic substrate. Tetraethylorthosilicate (TEOS) was mixed with the fuel (liquid petroleum gas, LPG) and burned to generate silica-based coating precursors for deposition from the flame. Two deposition conditions were adopted. For condition 1 (C1), the silicon-to-carbon ratio in the mixed fuel was set at 0.1 mol% for the first 5 min and at zero mol% for the final 95 min in a 100-min operation. For condition 2 (C2), the ratio was set at 0.005 mol% during the entire 100 min operation. The total TEOS feed was the same under both conditions. C1 resulted in a rather uniform and thicker (5-10 μm on the pressure side) porous silica-based coating on the blade than C2. The in situ deposited layer of C1 was well preserved on the blade and protected the underlying metallic substrate from oxidation during the entire 100 min operation. The layer on the C2 blades was ∼5 μm thick at the region near to root, but was too thin in the other areas on the blade to be protective. The early build-up of a porous layer to an effective thickness on the blades produced a thermal barrier toward the substrate as well as a diffusion barrier toward the oxidizing elements during operation.     

Strong visible PL from the nc-Si thin film by Ni silicide mediated crystallization

We studied the growth of nanocrystalline silicon (nc-Si) thin film exhibiting a strong room temperature photoluminescence (PL) at 1.81–2.003 eV. The amorphous silicon was crystallized by Ni silicide mediated crystallization (Ni SMC) and then Secco-etched to exhibit the PL. The PL peak energy and intensity increase with increasing the metal density on the a-Si because of the reduction in the grain size down to 2 nm. The photoluminescence energy and peak intensity depend strongly on the Secco etch time because the grain size is reduced by etching the grain boundaries.     

Memory effects in an interacting magnetic nanoparticle system

We have performed a series of measurements to study the low temperature dynamics of an interacting magnetic nanoparticle system. The results obtained demonstrate striking memory effects in the dc magnetization and magnetic relaxation that support the existence of a spin-glass-like phase in interacting magnetic nanoparticles. Moreover, we observe an asymmetric response with respect to temperature change that supports a hierarchical picture, rather than the droplet model discussed in other works on nanoparticle systems.     

Single spin and chiral glass transition in vector spin glasses in three dimensions

Results of Monte Carlo simulations of XY and Heisenberg spin glass models in three dimensions are presented. A finite-size scaling analysis of the correlation length of the spins and chiralities of both models shows that there is a single, finite-temperature transition at which both spins and chiralities order.     

Investigation of the onset and development of forward scattering in an underdense plasma

We investigate the distortion of a spatial intensity modulation imposed on a 527 nm f/10 probe beam as it transmits through an underdense plasma characterized with Thomson scattering. Combining the measurements with full wave simulations of beam propagation through the entire plasma show that the key features of the data can be reproduced using the Kaiser thermal transport model.     

Experimental implementation of a Wiener filter in a hybrid digital--optical correlator

We present the implementation of a clutter-tolerant filter in a hybrid correlator system. Wiener filters were mapped with a complex encoding technique onto a smectic A(*) liquid-crystal spatial light modulator (SLM). The technique overcomes the problem of representing high-dynamic-range data on SLM's that have limited modulation capabilities. It also provides a compact image recognition system that is robust enough for many real-world applications. Experimental results are presented.     

Fouling Mitigation in a Heat Exchanger: High Cycles of Concentration for a Cooling-Tower Application

The purpose of the present study is to investigate the effect of a physical water treatment (PWT) technology on fouling mitigation in a simulated cooling tower operating at high cycles of concentration. Hard water was produced by evaporating pure water in a circulating open cooling tower, where dissolved calcium carbonate ions became concentrated with time. Heat transfer tests were conducted in a rectangular channel by varying the cycle of concentration (COC) from 5 to 10, and fouling resistances were measured over 270 hrs for each case with and without the PWT treatment. Another test was conducted with no blowdown case with and without the PWT treatment. The fouling resistance at 5 cycles with the PWT treatment was about 70% less than that in the case without the PWT treatment at the end of 270-hr tests. Even at 10 cycles, the PWT treatment reduced the fouling resistance by 60% from the value for the no treatment case. Thus, one can conclude that the PWT technology can help circulating cooling-tower water at relatively high COC for significant freshwater conservation, while keeping fouling resistances below industry standards.     

Europium Oxychloride Absorption Spectroscopy as an Optical Probe of Temperature

The temperature dependence of the features which arise from the ⁷F_0,1 → ⁵D₃ absorption transitions in EuOCl as seen by diffuse-reflectance spectroscopy has been investigated. The transitions shift linearly to higher energy with increasing temperature. The ratio of the intensities of the transitions arising from the ⁷F₀ state to those arising from the ⁷F₁ state also appears to be a linear function of temperature.     

Acoustic behaviour and equation of state of amorphous ethylene–vinyl acetate copolymer studied by means of high-pressure Brillouin scattering spectroscopy

The determination of the equation of state (EOS) of amorphous materials is very important for fundamental understanding of the glass transition and applications as well. Simultaneous observation of both longitudinal and transverse acoustic modes by Brillouin scattering spectroscopy has been one of the major methods to obtain EOS of amorphous materials. However, the transverse acoustic mode is hardly seen from some of the amorphous polymers, which makes it difficult to derive EOS. The temperature and pressure dependences of the acoustic properties of amorphous ethylene–vinyl acetate (EVA) copolymer were measured by using high-pressure Brillouin scattering spectroscopy. The temperature variation induced large changes in the frequency shift and linewidth of the longitudinal acoustic mode due to strong coupling between the structural relaxation process and the propagating density fluctuations. The residual linewidth in the glassy state was attributed to the remnant intramolecular motions of EVA, the activation energy of which was estimated to be ～3.30 ± 0.27 kcal/mol. The pressure–density relationship of EVA could be obtained for the first time by measuring the refractive index and using the Lorentz–Lorenz equation. The density and the refractive index exhibited monotonic increase up to approximately 12 GPa. The strong reduction of the acoustic damping at low pressures below ～3 GPa was attributed to the collapsing free volume in EVA. The present study clearly shows that measuring the refractive index by high-pressure Brillouin spectroscopy may be an alternative method to get the EOS of polymeric materials whose transverse acoustic mode is too weak to be observed.