Parahydrogen-Induced Polarization of Diethyl Ether Anesthetic

The growing interest in magnetic resonance imaging (MRI) for assessing regional lung function relies on the use of nuclear spin hyperpolarized gas as a contrast agent. The long gas-phase lifetimes of hyperpolarized ¹²⁹Xe make this inhalable contrast agent acceptable for clinical research today despite limitations such as high cost, low throughput of production and challenges of ¹²⁹Xe imaging on clinical MRI scanners, which are normally equipped with proton detection only. We report on low-cost and high-throughput preparation of proton-hyperpolarized diethyl ether, which can be potentially employed for pulmonary imaging with a nontoxic, simple, and sensitive overall strategy using proton detection commonly available on all clinical MRI scanners. Diethyl ether is hyperpolarized by pairwise parahydrogen addition to vinyl ethyl ether and characterized by ¹H NMR spectroscopy. Proton polarization levels exceeding 8 % are achieved at near complete chemical conversion within seconds, causing the activation of radio amplification by stimulated emission radiation (RASER) throughout detection. Although gas-phase T₁ relaxation of hyperpolarized diethyl ether (at partial pressure of 0.5 bar) is very efficient, with T₁ of ca. 1.2 second, we demonstrate that, at low magnetic fields, the use of long-lived singlet states created via pairwise parahydrogen addition extends the relaxation decay by approximately threefold, paving the way to bioimaging applications and beyond.     

High-resolution magic angle spinning NMR of the neuronal tau protein integrated in Alzheimer's-like paired helical fragments

HRMAS NMR of tau paired helical fragments assembled with heparin show an intensity decrease for those amino acids that are incorporated into the rigid core region, whereas the N-terminal amino acids maintain their full mobility.     

Amino acid ionic liquid‐based titanomagnetite nanoparticles: An efficient and green nanocatalyst for the synthesis of 1,4‐dihydropyrano[2,3‐c]pyrazoles

The amino acid ionic liquid tetrabutylammonium asparaginate (TBAAsp) was immobilized on titanomagnetite (Fe_3?xTi_xO₄) nanoparticles in a facile one‐pot process using an organosilane compound (TMSP) as spacer. The modified Fe_3?xTi_xO₄@TMSP@TBAAsp magnetic nanoparticles were characterized using Fourier transform spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, vibrating sample magnetometry and thermogravimetric analysis. The resulting analytical data clearly verified the successful immobilization of the ionic liquid on the magnetic substrate. The magnetic ionic liquid‐based nanoparticles exhibited high catalytic activity in the synthesis of 1,4‐dihydropyrano[2,3‐c]pyrazole derivatives via a one‐pot three‐component reaction under mild reaction conditions. The catalyst was easily recycled and reused for at least six runs without any considerable loss of activity.     

Effects of Halogen Bonding in Chemical Activity of Lead(II) Electron Pair: Sonochemical Synthesis,Structural Studies,and Thermal Analysis of Novel Lead(II) Nano Coordination Polymer

The nanoflower lead(II) coordination compound {[Pb(phen)(μ‐CH₃COO)][PF₆]}_n ( 1 ) (phen = 1,10‐phenanthroline) was synthesized by a sonochemical method. The nanostructure was characterized by using scanning electron microscopy (SEM), X‐ray powder diffraction, elemental analysis, and thermal analysis. The single‐crystal X‐ray structure shows that the overall structure of 1 is a 1D coordination polymer. Complex 1 has a bridging acetate pathway. Three halogen bonds observed in the structure and the strong halogen bonding of F–Pb causes chemical activity of the lead electron pair. This is further extended into a 3D supramolecular structure by weak π–π intermolecular interactions. The coordination number of the lead(II) ions is six, resulting in PbN₂O₄. PbO nanoparticles were obtained by the thermolysis of 1 at 180 °C with oleic acid as a surfactant. The morphology and size of the prepared PbO nanoparticles were further observed using scanning electron (SEM) and transmission electron microscopy (TEM), and were analyzed by X‐ray photoelectron spectroscopy (XPS).     

Oleochemical‐Tethered SBA‐15‐Type Silicates with Tunable Nanoscopic Order,Carboxylic Surface,and Hydrophobic Framework: Cellular Toxicity,Hemolysis, and Antibacterial Activity

Novel silicates were prepared by using silylated natural fatty acids (derived from triglyceride renewable oils) as co‐condensing reagents in presence of tetraethyl orthosilicate (TEOS) and the triblock copolymer, pluronic P123, as a structure directing agent. A series of carboxylic acid functionalized SBA‐15‐type mesoporous silicates were obtained with tunable nanoscopic order and reactive functional groups that allow the conjugation of amino probes by peptide coupling. Photophysical studies of the covalently linked aminopyrene substantiated that the internal framework of these materials have pronounced hydrophobicity. Moreover, phase separation that can emanate from the bulkiness of the starting fatty silanes has been ruled out owing to the absence of excimers after aminopyrene grafting. The hemotoxicity, cytotoxicity, and antimicrobial activity of these novel silicates were then evaluated. Without discrimination, the functionalized silicates show a significant decrease of red blood cell hemolysis as compared to bare SBA‐15‐silica material. Within the modified silicate series, germanium‐free mesoporous silicates induce only a slight decrease in cell viability and, more interestingly, they exhibit negligible hemolytic effect. Moreover, increasing their concentration in the medium reduces the concentration of released hemoglobin as a result of Hb adsorption. Promising antimicrobial properties were also observed for these silicates with a slight dependency on whether phenylgermanium fragments were present within the silicate framework.     

Preparation of poly(acrylamide)/nanoclay organic-inorganic hybrid nanoparticles with average size of ∼250 nm via inverse Pickering emulsion polymerization

In this study, the preparation of poly(acrylamide)/nanoclay organic-inorganic hybrid nanoparticles via surfactant-free inverse emulsion polymerization by using organically modified clay platelets as stabilizers was discussed. Colloidally stable inverse Pickering emulsions of aqueous acrylamide solution in cyclohexane (solvent) stabilized by hydrophobic Cloisite 20A (MMT20) were prepared. Polymerization was carried out via 2,2′-azobis(isobutyronitrile) and composite particles with an average size of ～250 nm were obtained. The effect of initiator and solvent type on the stability, size, size distribution, and morphology of the produced composite particles was examined. It was observed that in the presence of xylene as solvent, particles with bigger sizes and broader size distribution were obtained. Furthermore, using an ionic initiator resulted in a slight coagulation during polymerization and smaller particles. Moreover, the effect of various polymerization conditions such as temperature, initiator, and crosslinking agent concentration and clay content on the polymerization rate was evaluated. The experimental results showed that polymerization rate increases with an increase in polymerization temperature, crosslinking agent concentration, and initiator content. However, increasing in clay content results in a lower polymerization rate.     

Shape of the particles produced by seeded dispersion polymerization of styrene

In this work, seeded dispersion polymerization of styrene was carried out in the presence of various types of seed particles. We found that in the case of polystyrene and poly(methyl methacrylate) seeds, the shape of the resulting particles remained spherical. For styrene/poly(nbutyl methacrylate) (PnBMA) and styrene/poly(lauryl methacrylate) seeding particles, raspberry like particles were produced along with those of occluded morphology. We studied the effects of various polymerization factors such as concentrations of a stabilizer, an initiator, and a monomer, a weight ratio of methanol to water, a type of initiator, weight ratio of styrene to Pn-BMA seed particles, and polymerization temperature on the formation of these raspberry-like particles. The experimental results showed that the increase of concentrations of the initiator and the stabilizer as well as that of methanol favors the formation of such particles by increasing their surface roughness. An increase of the temperature of polymerization had the same effect on the morphology of resulting product. We hypothesized that the nucleation and growth of specifically fine-structured polystyrene domains on the surface of the Pn-BMA particles guides the formation of non-linear morphology during seeded polymerization in colloidal solution.     

Theoretical study on the small carbon nano-ladders

1,3-Butadiyne, 1,3,5-hexatriyne, 1,3,5,7-octatetrayne, and 1,3,5,7,9-decapentayne are small oligomeric forms of acetylene. These oligomers participate in cyclization reactions to form ladder-like structures. Enthalpies, ?H, and Gibbs free energies, ?G, of the cyclization reactions were calculated employing MP2 and B3LYP methods. The calculated ?H and ?G were positive, and their variation versus carbon atoms number, n, was fitted in linear functions as ?H(n) = a+bn. The calculations were performed on the structures with carbon numbers up to 20. Also, consecutive cyclization reactions between acetylene molecules were studied. During these consecutive reactions, two different structures, zigzag-ladder-like and cyclic molecules with tetragonal rings, were produced. Among the cyclic structures, the hexagonal form was the most stable structure. The calculated ?H and ?G of formation of zigzag-ladder-like molecules were excellently fitted in linear functions. The obtained functions for ?H and ?G calculated by MP2 method are ?H(n) = 139.67?126.44n and ?G(n) = 80.987?75.684n, respectively.     

Experimental and numerical analysis of automotive gearbox rattle noise

The aim of this work is to characterize the rattle noise of automotive gearboxes, resulting from impacts between toothed wheels of unselected gear ratios. These stereo-mechanical impacts are modeled by a coefficient of restitution which describes damping during the squeezing of the lubricant film for approaching surfaces, and the elastic deformation of impacting bodies. The dynamic response of the loose gear first depends on the design parameters and the engine operating conditions. The unknown parameters are the drag torque and the coefficient of restitution. They are identified experimentally through implementation of two optical encoders in an actual automotive gearbox and the operation of a specific test bench which replicates the automotive power train. Models of the different drag torque sources are validated from analysis of the free damped response of the driveline. The coefficient of restitution and its probability density function are measured from experiments under stationary operating conditions. A nonlinear model is built. The dynamic response of the loose gear depends on the dimensionless backlash, the coefficient of restitution and a dimensionless parameter proposed to describe the rattle excitation level. Experiments under controlled excitation are performed to validate the assumptions, to confirm the ability of the parameter proposed to describe the rattle noise threshold, and to characterize the dynamic response. The nonlinear model predictions are fitted with the drag torque and coefficient of restitution previously identified. They are compared with measurements to demonstrate the ability of the model to predict gear rattle for any loose gear, any gearbox and any operating condition.