Perfluoropentacene: high-performance p-n junctions and complementary circuits with pentacene

We report the synthesis and characterization of perfluoropentacene as an n-type semiconductor for organic field-effect transistors (OFETs). Perfluoropentacene is a planar and crystalline material that adopts a herringbone structure as observed for pentacene. OFETs with perfluoropentacene were constructed using top-contact geometry, and an electron mobility of 0.11 cm2 V-1 s-1 was observed. Bipolar OFETs with perfluoropentacene and pentacene function at both negative and positive gate voltages. The improved p-n junctions are probably due to the similar d-spacings of both acenes. Complementary inverter circuits were fabricated, and the transfer characteristics exhibit a sharp inversion of the output signal with a high-voltage gain.     

HPLC retention behaviors of pi-electron rich compounds on Ni2+- and Cu2+-phthalocyanine derivatives bound to silica gels in polar eluents.

The effect of the central metal of columns packed with silica gels binding Ni(2+)- and Cu(2+)-phthalocyanine derivatives (Ni-and Cu-PCS(D)s) on the retention behavior of poly-aromatic-hydrocarbons (PAHs) thereof in a polar eluent was examined. The retention factors of PAHs on the Ni- and Cu-PCS(D)s in 80% methanol showed a good linear correlation. The Cu-PCS(D) column exhibited the pi-pi interactions for PAHs, while the Ni-PCS(D) column exhibited the pi-d interactions for PAHs in addition to the pi-pi interaction for PAHs. Further, an investigation of the retention behavior of anthracene derivatives having different substituents revealed that the Ni- and Cu-PCS(D) columns could recognize the differences of substituents only in a polar eluent.     

Analysis of a series of isomeric oligosaccharides by energy‐resolved mass spectrometry: a challenge on homobranched trisaccharides

Glycans exist as part of glycoproteins and glycolipids, which are involved in a variety of biological functions. The analysis of glycan structures, particularly that of structural isomers, is fundamentally important since isomeric glycans often show distinct functions; however, a method for their structural elucidation has not yet been established. Anomeric configurations, linkage positions and branching are the major factors in glycans and their alteration results in a large diversity of glycan structures. The analysis of vicinally substituted oligosaccharides is extremely difficult because the product ions formed in tandem mass spectrometry (MS/MS) often have the same m/z values. In our endeavor to address the issue, we analyzed a series of homo‐substituted trisaccharides consisting only of glucose by collision‐induced dissociation (CID), especially energy‐resolved mass spectrometry (ERMS). It was found that these structurally related glycans could be distinguished by taking advantage of differences in their activation energies in ERMS. Copyright © 2009 John Wiley & Sons, Ltd.     

Fluorescence-monitored zero dead-volume nanoLC-microESI-QIT-TOF MS for analysis of fluorescently tagged glycosphingolipids

An analysis of the glycan processing event is of particular importance to understand the nontemplate dependent synthetic mechanism of the multiple glycosylation reactions taking place in the Golgi apparatus in connection with the post-translational modification of biomolecules. In our efforts to address the issue, we constructed an analysis platform using nano-liquid chromatography (LC), which also worked as a spray tip, with an optical-fiber-based blue (470 nm) light emitting diode (LED)-induced fluorescence (520 nm) detector coupled with a microelectrospray ionization (ESI)-quadrupole ion trap (QIT)-time of flight (TOF) mass spectrometer (MS). This system was designed to enable both quantitative and qualitative analyses of fluorescently tagged molecules such as BODIPY-tagged lactosylceramide. Owing to the zero dead volume after LC separation, an extremely high sensitivity was achieved for the quantitative analysis (260 amol). It was also shown that a simultaneous online structural analysis based on MS could be achieved for the same quantity of analyte. To further demonstrate its potential, an enzymatic reaction of fluorescently tagged lactosylceramide using sialyltransferase was carried out, and the conversion yield was obtained on the basis of fluorescence detection. In addition, the structural details of a product, sialyl lactosylceramide, were obtained by MS and MS/MS analyses.     

Phospholipids with a stimuli-responsive thermotropic liquid-crystalline moiety

Lyotropic liquid-crystalline phospholipids having an electro- and/or light-responsive mesogenic core were prepared. These LCs show lyotropic smectic A, smectic C, rectangular columnar, and nematic phases. We succeeded in the dynamic control of these LC phases by applying an electric field, which could lead to electrically switchable phospholipid bilayers.     

Comparison of Mineral Acids in Wet Digestion of Plant Materials for Flame and Flameless Atomic Absorption Measurement of Metals

Various mineral acids are compared in measuring metals in plant materials by flame and flameless atomic absorption spectrometry. NBS-SRM 1571, Orchard Leaves, is utilized as the plant material. The combination of H₂SO₄ and HNO₃ is found to be the most suitable for measuring Fe, Mn, Cu and Zn by flame atomic absorption spectroscopy, while HNO₃ is found to be the best for measuring Cu, Mn, and Pb by flameless Atomic Absorption spectroscopy.     

A Lysoganglioside/Poly-L-glutamic Acid Conjugate as a Picomolar Inhibitor of Influenza Hemagglutinin

Based on the principle of a multivalent interaction, the amphiphilic polymer 1 , present in solution as an aggregate (see below right), is able to inhibit infection with the influenza virus. After recognition of a specific sialyllactose epitope through hemaglutinin (HA) on the virus surface, the sphingosine residues and the fluorescent tag form a stable complex with HA through hydrophobic interactions. Polymer 1 shows in vitro inhibitory activity 10⁶-fold greater than that of sialyllactose. PGA=polyglutamic acid.     

Synthesis of polymers in aqueous solutions: Esterification reaction of poly(methacrylic acid) with alkyl halides using DBU in aqueous solutions

A convenient esterification reaction of poly(methacrylic acid) (PMAA) with certain alkyl halides was performed using 1,8-diazabicyclo-[5.4.0]-7-undecene (DBU) as a base in aqueous solution or in water. The esterification reaction of PMAA with propargyl bromide (PB) proceeded very smoothly and quantitatively at 30°C to give corresponding poly(propargyl methacrylate), although the rate of the reaction decreased with increasing water. The reaction of PMAA with benzyl bromide, o-nitrobenzyl bromide, and p-nitrobenzyl bromide gave corresponding poly(methacrylic ester) using DBU under suitable reaction conditions in water. The esterification reactions of PMAA with PB were carried out using certain organic bases such as triethylamine, 4(N,N-dimethylamino)pyridine and pyridine. Inorganic bases such as sodium carbonate, sodium hydroxide, potassium carbonate, and potassium hydroxide were also tried under the same conditions as with DBU. However, the degrees of estrification with all these bases was much lower than that with DBU. © 1996 John Wiley & Sons, Inc.