Ordered Mesoporous Carbon and Thiolated Polyaniline Modified Electrode for Simultaneous Determination of Cadmium(II) and Lead(II) by Anodic Stripping Voltammetry

The fabrication and evaluation of a glassy carbon electrode (GCE) modified with ordered mesoporous carbon (OMC), 2‐mercaptoethanesulfonate (MES)‐tethered polyaniline (PANI) and bismuth for simultaneous determination of trace Cd²⁺ and Pb²⁺ by differential pulse anodic stripping voltammetry (DPASV) are presented here. The morphology and electrochemical properties of the fabricated electrode were respectively characterized by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). Experimental parameters such as PANI disposition, preconcentration potential, preconcentration time and bismuth concentration were optimized. Under optimum conditions, the fabricated electrode exhibited linear calibration curves ranged from 1 to 120 nM for Cd²⁺ and Pb²⁺. The limits of detection (LOD) were 0.26 nM for Cd²⁺ and 0.16 nM for Pb²⁺ (S/N=3), respectively. Additionally, repeatability, reproducibility, interference and application were also investigated, and the proposed electrode exhibited excellent performance. The proposed method could be extended for the development of other new sensors for heavy metal determination.     

Synergistic effects in mixed gas chromatographic stationary phases containing hepatkis(2.3.6-tri-O-pentyl)-β-cyclodextrin and AgNO3 or TINO3 in the separation of xylene isomers

Summary The gas chromatographic separation of xylene isomers using special mixed stationary phases consisting of heptakis(2.3.6-tri-O-pentyl)-β-CD-AgNO₃, heptakis (2.3.6-tri-O-pentyl)-β-CD-TINO₃ or bentone-34-AgNO₃ is investigated. The first two have positive synergistic effects for the separation of m, and p-xylene isomers, but negative synergistic effects for the m, and oisomers. The separation effects depend on temperature, mixing ratio and how mixing is accomplished.     

Preparation of aptamer‐bound polyamine affinity monolithic column via a facile triazine‐bridged strategy and application to on‐column specific discrimination of ochratoxin A

Developing a high‐performance modification protocol is critical for efficiently fabricating affinity monolith. Herein, by using 2,4,6‐trichloro‐1,3,5‐triazine as the linker, a simple triazine‐bridged approach was proposed for efficiently fabricating aptamer‐grafted polyhedral oligomeric silsesquioxane‐polyethyleneimine affinity monolith with high specificity toward ochratoxin A. Experimental parameters, column characteristics and specificity performances of the resultant affinity monolith were investigated in detail. Under the optimal conditions, 2,4,6‐trichloro‐1,3,5‐triazine was rapidly grafted on the polyamine matrix, and effectively applied to the subsequent bridge linkage of aptamers. It was simple and effective, which resulted in a significant decrease of modification time, excellent properties including the high coverage density of aptamer up to 1799 pmol/μL and sensitive detection of ochratoxin A as low as 10 pg/mL in beer samples. This protocol provides a facile approach for fabricating aptamer‐grafted polyamine affinity monoliths with highly selective discrimination performance.     

高等代数与解析几何一体化教学思考

本探讨了高等代数与解析几何进行一体化教学的必要性，研究了高等代数与解析几何进行一体化教学以后教学内容的协调性与教学手段的合理性，强调了数学实验在高等代数与解析几何一体化教学中的重要性。     

区间中立型大系统的强壮稳定性

本文讨论中立型大系统,获得了这类问题稳定性的一些充分判据,作为特殊情况,还得到了与[1-11]中相应的一些不同的结果.这些结果并不象文献[1]和[2]那样,要求a_(ii)的上界q_(ii)小于零.     

Ordered nickel oxide nanowire arrays and their optical absorption properties

Ordered NiO nanowire arrays embedded in anodic alumina membranes have been prepared by using an electrochemical deposition method. After annealing at 300 °C, the NiO nanowire arrays were characterized using SEM, TEM, SAED, and XRD. SEM and TEM observations reveal that these nanowires are dense, continuous and arranged roughly parallel to one another. XRD and SAED analysis together indicate that these NiO nanowires crystallize with a polycrystalline structure. The optical absorption band gap of NiO nanowire arrays is 3.74 eV, and no obvious blue shift or red shift with respect of that of the bulk NiO can be observed.     

CrO3在γ-Al2O3和SiO2载体表面的分散状态

用X光衍射(XRD)方法研究了CrO_3/SiO_2和CrO_3/γ-Al_2O_3体系。用相定量外推法测定活性组份在载体表面的最大分散量。在干燥气氛中将CrO_3与载体混合, 并在低于CrO_3熔点的温度下烘烤制备样品, 实验得到CrO_3在SiO_2或者γ-Al_2O_3表面的最大分散量都随温度的升高而增大。CrO_3在SiO_2表面的最大分散量由101 ℃的0.27gCrO_3/g SiO_2到170 ℃的0.38g CrO_3/g SiO_2; CrO_3在γ-Al_2O_3表面的最大分散量由120 ℃的0.22g CrO_3/g γ-Al_2O_3到171 ℃的0.42g CrO_3/g γ-Al_2O_3。CrO_3在SiO_2或γ-Al_2O_3表面的最大分散量超过密置单层量, 可由易聚合形成同多酸根来解释。     

自辐射场下UN2分子的光谱研究

对铀原子和氮原子分别使用相对论有效原子实势和6-311+G(d)基组, 采用优选的密度泛函B3P86方法, 研究了铀本身产生自辐射场(-0.005–0.005 a.u.)作用下UN₂基态分子的能隙E_g和谐振频率ν. 结果表明: UN₂分子在自辐射场中反对称伸缩振动频率ν₃(σ_g)和对称伸缩振动频率σ₁(σ_g)与实验值1051.1 cm^-1和1008.3 cm^-1 基本符合; E_g随自辐射场场强的增大而趋于减少, 占据轨道的电子容易被激发至空轨道而形成激发态; UN₂分子在自辐射场中趋于不稳定, N₂, O₂等更容易扩散到表面内层而腐蚀铀表面, 加剧了铀在自辐射场中的腐蚀.     

卤化物固态电解质研究进展

全固态电池因其高能量密度和高安全性而成为具有发展前景的下一代储能技术。开发具有高室温离子电导率、优异化学/电化学稳定性、良好正/负极兼容性的固态电解质是实现全固态电池实用化的关键。卤化物固态电解质因其优异的电化学窗口、高正极稳定性、可接受的室温锂离子电导率等优势,受到了广泛的关注。本文通过对近年来卤化物电解质的相关研究进行总结,综述了该类电解质的组成、结构、离子传导路径及制备方法,并分析了金属卤化物电解质的电导率、稳定性特点,归纳了近年来该电解质在全固态电池中具有代表性的应用,并基于以上总结和分析,指出了卤化物固态电解质的研究难点及发展方向。     

Stereoselective Synthesis of Allylic Amines by One-Pot Tandem Reaction of Acetylenic Sulfone,Grignard Reagent,and N-Tosylimine

Polysubstituted allylic amines were regio- and stereoselectively synthesized by a one-pot tandem reaction of Cu(I)-catalyzed carbomagnesiation of acetylenic sulfones and its further reaction with N-tosylimine.