Theoretical study of the local structure and Raman spectra of CaO-SiO2 binary melts

A procedure for the Raman spectra calculation of vitreous and molten silicates was presented in this paper. It includes molecular dynamics MD simulation for the generation of equilibrium configurations, Wilson's GF matrix method for the calculations of eigenfrequencies and corresponding vectors, electro-optical parameters method (EOPM) for the Raman intensity calculations, and the bond polarizability model (BPM) for the determination of polarizability and polarizability derivative. One of the most important characteristics of this procedure is the achievement of the partial Raman spectra of five tetrahedral units, as well as the total spectral envelope. In this paper, the calculation was carried out for the vitreous and molten calcium silicates with different compositions and at various temperatures. It is worthwhile to note that the calculation is based on statistical configurations distribution in the space and so it is not needed to artificially adjust the full width at half maximum (FWHM) of spectra. It was also tested through the good agreement of the calculated spectra with the experimental, including some regularity of spectral properties. According to the calculation, the symmetrical stretching of whole tetrahedral units, to which the stretching of Si-O(nb) bond gives the main contribution to intensity, is proven to be the dominance in the high-frequency range (800-1200 cm(-1)) and the symmetrical bending of Si-O(b)-Si, to which the stretching of Si-O(b) bond exhibits the main contribution, is the dominance in the medium-frequency range (400-700 cm(-1)). As the first theoretical results, the Raman scattering coefficient of each Q(i) was found little change along with the variation of composition and temperature.     

A short and efficient enantioselective route to a key intermediate for the total synthesis of forskolin

A simple route for the enantioselective synthesis of key intermediates (11 and 12) for the total synthesis of forskolin has been developed starting from acid 6 and (S)-alcohol 5. The latter is prepared by enantioselective catalytic CBS reduction of dienone 3, and is converted by an intramolecular Diels-Alder reaction to tricyclic lactone 9.     

Fabrication of lead titanate single crystalline nanowires by hydrothermal method and their characterization

Single crystalline nanowires of lead titanate (PbTiO₃) were fabricated by hydrothermal method at 200°C using lead acetate and n-tetrabutyl titanate as starting materials, where sodium hydroxide was served as a mineralizer. Crystalline phases, microstructure and optical properties of PbTiO₃ nanowires were investigated. The PbTiO₃ nanowires were uniform and continuous along the long axis, and were composed of single crystalline PbTiO₃ with a tetragonal perovskite structure. The diameter of a single nanowire was around 12 nm and the length reached up to 3 μm. The chemical composition of the samples and the valence states of elements were determined by X-ray photoelectron spectroscopy (XPS). The ultraviolet/visible absorption spectroscopic investigation suggested that the absorption edge of optical transition of the first excitonic state occurred at around 320 nm. A blue-green light emission peaking at about 471 nm (2.63 eV) is observed at room temperature, and the intensity of this emission increased with increasing excitation wavelength. Oxygen vacancies are responsible for the light emission of PbTiO₃ nanowires.     

Synthesis of diethers derived from furoin by phase transfer catalysis under microwave irradiation

A series of new diethers were obtained by alkylation of furoin under microwave irradiation (MWI) in phase transfer catalysis (PTC) conditions. The products of alkyl halides were synthesized in good yields (>75%) within a few minutes, and the products of dihalides were synthesized in fair yields (about 45%). The yields are dramatically improved compared to conventional heating under the same conditions, in spite of similar profiles of rising in temperature.     

Unusual magnetic properties of one-dimensional molecule-based magnets associated with a structural phase transition

Three ion-pair complexes, [RbzPy](+)[Ni(mnt)(2)](-) (mnt(2)(-) = maleonitriledithiolate; [RbzPy](+) = 4-R-benzylpyridinium; R = Br (1), Cl (2), and NO(2) (3)), with unusual magnetic properties have been synthesized and characterized. The crystal structures of 1 and 2 have been solved. The two complexes belong to the P2(1)/c space group with Z = 4 and C(20)H(11)BrN(5)NiS(4), a = 12.0744(17) A, b = 26.369(4) A, c = 7.440(3) A, and beta = 102.63(3) degrees for 1 and C(20)H(11)ClN(5)NiS(4), a = 12.105(2) A, b = 26.218(4) A, c = 7.374(2) A, and beta = 102.55(2) degrees for 2, respectively. The [Ni(mnt)(2)](-) anions in 1-3 form uniformly spaced one-dimensional (1-D) magnetic chains of s = 1/2 at room temperature. The temperature dependences of the susceptibility for 1-3 show that they undergo phase transitions. All three complexes are paramagnetic in their high-temperature (abbreviation HT) phase and diamagnetic in the low-temperature (abbreviation LT) phase because of strong dimerization along the stacking direction. The results of thermal analysis (DSC) further confirm that the phase transition for 1 and 2 is first-order but maybe second-order for 3. The phenomena observed in this study are similar to those of the 1-D radical systems.     

产母及新生儿血铅水平及影响因素的研究

为了解佛山市产母、新生儿血铅水平及其相关影响因素 ,采用电感耦合高频等离子体发射光谱法 ,于 2 0 0 2年 5～ 9月 ,取本院产科产母静脉血及其新生儿脐血 1 5 2例 ,进行血铅、钙、锌、铁、铜和锰水平测定 ,按妇幼保健管理卡内容 ,进行相关记录。结果表明 ,产母血铅水平90 1± 3 4 8μg/L ,BPb≥ 1 0 0 μg/L者占 2 0 3 9% ;新生儿脐血铅水平 89 2± 3 1 6μg/L ,铅中毒率为2 2 3 7% ;母子血铅值呈显著正相关 (r=0 85 7,P <0 0 1 ) ,产母血铅值与其血钙、铁值显著负相关 (r=0 2 66,-0 3 0 1 ,P <0 0 5 ) ;城郊产母及新生儿血铅水平显著高于城区。揭示市郊孕妇、新生儿血铅较高 ,血钙、锌、铁含量影响血铅水平     

Composite Electrode SnO2／TiO2 for Dye-Sensitized Solar Cells

Composite nanoporous electrode SnO2/TiO2 was fabricated for the dye sensitized solar cell (DSSC) with N3 (Cis-Ru). After introducing of TiO2, the open-circuit photovoltage (Voc) was higher than that of the pure SnO2 electrode, while short-circuit photocurrent (Isc) was varied with the ratio of the TiO2. Appropriate content of the TiO2 can be beneficial to the efficiency of the solar cell, and it gives negative impact on the composite electrode when the content of TiO2 is higher.     

Characterization and electrochemical investigation of boron-doped mesocarbon microbead anode materials for lithium ion batteries

The structure and anodic performance of boron-doped and undoped mesocarbon microbeads (MCMBs) have been comparatively studied and the results obtained by XPS, XRD, SEM, Raman spectroscopy and electrochemical measurements are discussed. It is found that boron doping introduces a depressed d ₀₀₂ spacing and the larger amount of "unorganized carbon", which induces vacancy formation in the graphite planes and leads to a quite different morphology from that of the undoped material. Electrochemical charge/discharge cycle tests indicated that after boron doping the lithium intercalation was carried through at a somewhat higher potential, being attended by greater irreversible capacity loss. Electronic Publication     

High-performance liquid chromatography of sulfonamides and quinolones on p-tert-butyl-calix[6]arene-bonded silica gel stationary phase

The high-performance liquid chromatographic behavior of some sulfonamides and quinolones was studied on a p-tert-butyl-calix[6]arene-bonded silica gel stationary phase. The effect of mobile phase variables such as methanol content, ionic strength and pH on their chromatographic behavior was investigated. The retention behavior of sulfonamides on the stationary phase was compared with that on both Zorbax C₁₈-bonded silica gel and γ-(ethylenediamino)propyltriethoxylsilane-bonded silica gel (diamino-bonded phase). The retention mechanism of sulfonamides and quinolones on the stationary phase was also discussed. The results indicate that the stationary phase behaves as a reversed-phase packing and its separation selectivity is much better than that of not only Zorbax C₁₈ phase but also diamino-bonded phase. Some sulfonamides and quinolones were separated on the stationary phase, but the separation of sulfonamides is far more successful.     

A study on the metalation of alkoxydibromobenzenes

The metalation of (quasi)alkoxy-substituted dibromobenzenes C₆H₃(OR)Br₂ with lithium diisopropylamide (LDA) has been investigated. For 1-(quasi)alkoxy-3,5-dibromobenzenes (R = Me, TMS), different selectivities were observed depending on reaction conditions and the size of the alkoxy group. The methoxy group was an effective ortho-director whereas this was not the case for the bulky trimethylsilyloxy group. The metalation of related 2,5-dibromoanisole was also examined showing a significant meta-directing effect by the methoxy group. The thermal stability of aryllithium intermediates is significantly lower when lithium is flanked by a bromine and a methoxy group, whereas 4-(quasi)alkoxy-2,6-dibromoaryllithiums are less labile.