Two-dimensional network formation of cardiac myocytes in agar microculture chip with 1480 nm infrared laser photo-thermal etching

We have developed a new method that enables agar microstructures to be used to cultivate cells and that allows cell network patterns to be controlled. The method makes use of non-contact three-dimensional photo-thermal etching with a 1480 nm infrared focused laser beam, which is strongly absorbed by water and agar gel, to form the shapes of agar microstructures. It allows microstructures to be easily formed in an agar layer within a few minutes, with cell-culture holes formed by the spot heating of a 100 mW laser and tunnels by the tracing of a 100 microm s(-1), 40 mW laser. We cultivated rat cardiac myocytes in adjacent microstructures and observed synchronized beating in them 90 min after they had made physical contact. Our results indicate that the system can make and use microstructures for cell-network cultivation in a minimal amount of time without any expensive microfabrication facilities or complicated procedures.     

Retention,enantioselectivity and enantiomeric elution order of propranolol and its ester derivatives on an alpha1-acid glycoprotein-bonded column

Summary The retention, enantionselectivity and enantiomeric elution order of racemic propranolol (PP) and its ester derivatives (O-acetyl,-propionyl,-butyrul and-valeryl PP) on an ₁-acid glycoprotein (AGP)-bonded column have been investigated by changing eluent composition (eluent pH, buffer concentration, type and content of organic modifier). The retention of these cationic solutes, PP and its ester derivatives, was influenced by eluent pH, ionic strength and organic modifier content. The enantioselectivity was dependent on eluent pH and type of organic modifier. Reversal of the enantiomeric elution order of ester derivatives of PP (O-propionyl-butyryl) and-valeryl PP) occurred around eluent pH 6–7. These results suggst that chiral recognition or binding properties may be altered by the change in eluent composition, espeically eluent pH and type of organic modifier.     

Room-temperature phosphorimetric determination of biogenic indole compounds adsorbed on a thin-layer chromatographic plate

A simple and sensitive method is described for the determination of biogenic indole compounds adsorbed on cellulose or alumina plates for thin-layer chromatography by room-temperature phosphorimetry. The optimum conditions were investigated for 5-hydroxyindole-3-acetic acid and indole-3-acetic acid. The compounds are spotted on the plates, which are then sprayed successively with sodium citrate or sodium acetate, and sodiu iodide solutions. The plates are dried completely under a stream of dry nitrogen, and immediately dipped in molten paraffin. The phosphorescence is stable for at least 3 h even in moist air. The limits of detection for nine biogenic indole compounds tested are between 2 and 300 pmol per sample spot.     

Streptonigrin and lavendamycin partial structures. Preparation of 7-amino-2-(2′-pyridyl)quinoline-5,8-quinone-6′-carboxylic acid: A probe for the minimum,potent pharmacophore of the naturally occurring antitumor-antibiotics

The preparation of 7-amino-2-(2′-pyridyl)quinoline-5,8-quinone-6′-carboxylic acid (4) constituting a potential minimum, potent pharmacophore of streptonigrin (1) and lavendamycin (2) , two structurally-related naturally-occurring antitumor-antibiotic, is detailed. In contrast to observations associated with streptonigrin and lavendamycin in which the C-6′ acid potentiates the antitumor, antimicrobial, and cytotoxic activity of the naturally-occurring, substituted 7-aminoquinoline-5,8-quinone AB ring systems, the C-6′ carboxylic acid of 4 diminishes the observed antimicrobial and cytotoxic properties of 7-amino-2-(2′-pyridyl)quinoline-5,8-quinone.     

Development of non-destructive isotopic analysis methods using muon beams and their application to the analysis of lead

Journal of Radioanalytical and Nuclear Chemistry - Elemental isotopic ratios are measured in various research fields and provide useful information regarding age, origin, geological and biological...     

Peripheral Modifications of meso-Hydroxyporphyrins: Formation of π-Electronic Anions and Ion-Pairing Assemblies

Phenyl groups were introduced at the β-positions proximal to the meso-hydroxy moiety in hydroxyporphyrin Ni^II complexes by oxidized BINAP Pd^II complexes. Ion-pairing assemblies of deprotonated π-electronic anions, anionic site of which was stabilized by the introduced phenyl moieties with a bulky cation, were formed. They showed charge-by-charge assemblies, assembly modes of which were modulated by the anionic building units.     

Preparation of Polymer Particles Coated with Hydroxyapatite

Polymer particles coated with hydroxyapatite were prepared by treating Pd0 immobilized polystyrene-co-acrylic acid particles in aqueous CaCl2 and NaH2PO2 solutions. Hydroxyapatite coating took place at neutral to alkaline pH conditions, and the homogeneous growth of the hydroxyapatite layer on the surface of polymer particles was observed at relatively low temperature (30-50 degrees C). The thickness of the hydroxyapatite layer increased with reaction time. Copyright 1999 Academic Press.     

Deposition behavior in a low‐temperature cascade arc torch (CAT) polymerization process

Two kinds of hydrocarbon type monomers and three kinds of organosilicons were polymerized by a low‐temperature cascade arc argon plasma torch. Their deposition behaviors were studied as a function of experimental parameters and monomer elemental compositions. It was found that the normalized deposition rate (DR), expressed as deposition yield of DR/(FM)_m, was determined by a composite operational parameter, W*(FM)_c/(FM)_m, where W is the power input, and (FM)_c and (FM)_m are the mass flow rates of carrier gases and monomers, respectively. Experimental results indicated that the deposition yield is highly dependent on the elementary compositions of monomers. Optical emission spectroscopy study on the argon plasma torch showed that the emission intensity of excited argon neutrals was proportional to the value of the parameter W*(FM)_c. These results further certified that excited argon neutrals are the main energy carriers from the cascade arc column to activate monomers in the argon plasma torch. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 967–982, 1999     

Synthesis and in vitro antifungal activities of novel triazole antifungal agent CS-758.

Synthesis and in vitro antifungal activities of a novel triazole antifungal agent CS-758 (former name, R-120758) are described. The minimum inhibitory concentrations (MICs) of a series of dioxane-triazole compounds related to R-102557 were examined. Variation of the length of the chain between the dioxane ring and the phenyl ring revealed that the linkage with two double bonds is the most preferable. When a cyano group was introduced to the C4 position on the benzene ring, MICs improved further. A fluorine atom was introduced to obtain CS-758. The MICs of CS-758 surpassed those of fluconazole and itraconazole against Candida, Aspergillus and Cryptococcus species. The precursor (E,E)-aldehyde was synthesized stereoselectively from 3-fluoro-4-methylbenzonitrile using the Horner-Wadsworth-Emmons reaction.     

Biodegradation of copolymers composed of optically active L‐lactide and (R)‐ or (S)‐1‐methyltrimethylene carbonate

Random copolymerizations of L ‐lactide with (R)‐, (S)‐, or rac‐1‐methyltrimethylene carbonate with bis(pentamethylcyclopentadienyl) samarium‐methyl tetrahydrofuranate [(C₅Me₅)₂SmMe(THF)] as a novel initiator provided high molecular weight polymers with low polydispersities. Biodegradation of the resulting polymers with tricine and {N‐[tris(hydroxymethyl)methyl]‐2‐aminoethane sulfonic acid (TES) buffers as well as activated sludge showed only a small weight loss, whereas the polymer with proteinase K revealed high biodegradability independent of the optical activity of 1‐methyltrimethylene carbonate. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3916–3927, 2001