1,2-bis(4-methoxyphenyl)ethylenediamine as a fluorogenic reagent for reducing carbohydrates

Eight 1,2-diarylethylenediamines in the meso- or DL-form produce fluorescence when heated with reducing carbohydrates in an alkaline medium. Of the diamines, meso-1,2-bis(4-methoxyphenyl)ethylenediamine is the most favourable reagent for reducing carbohydrates, including 2- deoxy sugars, amino sugars and sialic acids. The reagent permits the fluorimetric determination of reducing carbohydrates at concentrations as low as 0.2–0.9 nmol ml^?1.     

The study of electron beam flue gas treatment for coal-fired thermal plant in Japan

The fundamental research work with simulated coal-fired flue gas was performed in JAERI to get basic data for electron beam treatment of flue gas from thermal power plants in Japan. The standard condition of the experiments was set to be the same as that of next large scale pilot test in Nagoya. The concentrations of NO_x and SO_x were 225 ppm and 800 ppm, respectively. The temperature of the system was 65°C. The effect of multiple irradiation was observed for NO_x removal. The target SO_x and NO_x removals (94% and 80%, respectively) with low NH₃ leakage (less than 10 ppm) were achieved at 9 kGy irradiation with 0.9 NH₃ stoichiometry during 7 hours continuous operation. The facility for the pilot plant (12,000 Nm³/hr) has just built at the site of Shin-Nagoya power plant of Chubu Electric Power Company and will be started in full operation in November 1992.     

Enantioselective ring cleavage of dioxane acetals mediated by a chiral Lewis acid: application to asymmetric desymmetrization of meso-1,3-diols

[reaction: see text]. Phenylalanine-derived B-aryl-N-tosyloxazaborolidinones selectively activate one of two enantiotopic oxygen atoms in prochiral anti dioxane acetals derived from meso-1,3-diols, leading to enantioselective formation of ring-cleavage products. The reaction is utilized as a key step in asymmetric desymmetrization of meso-1,3-diols.     

Ideal nonideality in adsorption of 2-aminoethanethiol and 2-mercaptoethane sulfonic acid to form electrostatically stabilized binary self-assembled monolayers on Au(111)

In formation of binary self-assembled monolayers (SAMs) composed of 2-aminoethanethiol (AET) and 2-mercaptoethane sulfonic acid (MES) by adsorption from an ethanol solution on Au(111), the adsorption shows nearly ideal nonideality in that the surface ratio of MES to AET in the SAM is unity and does not depend on the mixing ratio of MES to AET in the bathing ethanol solution used for preparing SAMs, chi(soln)MES, over the wide range of chi(soln)MES between 0.01 and 0.95. X-ray photoelectron spectroscopy confirms that at least 80% of AET molecules adsorbed are protonated in this range of chi(soln)MES, indicating that the electrostatic interaction between positively charged AET and negatively charged MES is responsible to the observed nonideality. Correspondingly, there appears only one cathodic peak in a linear-sweep voltammogram of the reductive desorption of the SAM, having a narrow full width at half-maximum of about 20 mV. This suggests the presence of strong lateral attractive interaction between the adsorbed thiolates.     

Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.     

Relative efficiency calibration of Ge(Li) detector in low energy region

The relative gamma-ray intensities in the energy region between 122 and 411 keV in the decay of¹⁵²Eu were measured by using a Ge(Li) detector. Its efficiency calibration was carried out with the radioactive sources of²⁴¹Am,⁵⁷Co,²⁰³Hg,¹³⁷Cs,¹³³Ba,⁷⁵Se,¹⁶⁹Yb and¹⁹²Ir.     

Three novel quassinoids, javanicolides A and B, and javanicoside A, from seeds of Brucea javanica

Two novel quassinoids, javanicolides A and B, and one novel quassinoid glucoside, javanicoside A were isolated from the seeds of Brucea javanica Merr. (Simaroubaceae), along with four known quassinoids, yadanziolides A and D, and bruceins D and E, and two known quassinoid glucosides, yadanziosides D and L. Their structures were elucidated by the analysis of spectral data and chemical evidence.     

Determination of the specific interaction of disubstituted aromatic compounds on hydrous zirconium oxide-loaded porous polymer resin

Summary A porous polymer resin loaded with hydrous zirconium oxide (Zr-gel) was evaluated as a stationary phase for the liquid chromatographic separation of disubstituted aromatic compounds. The prepared Zr-gel was used to separate disubstituted phenols andortho-substituted benzoic acid derivatives in reversed-phase mode. The retention time of catechol was greater than those of other disubstituted phenols; this implies that the Zr-gel has specificity for the phenolic hydroxyl group. The retention behavior ofortho-substituted benzoic acid derivatives on the Zr-gel was also evaluated in reversedphase mode using buffer. Phthalic acid was specifically retained in the vicinity of pH 6.0, which has been regarded as the equal adsorbic point. Similar behavior was also observed for salicylic acid, although the retention time of salicylic acid was less than that of phthalic acid. It seems that the specific retention behavior of hydrous zirconium oxide is a result of complexation with ligands such as hydroxyl and carboxyl groups. The results of this study have revealed that the retention mechanism of hydrous zirconium oxide is a combination of ion exchange and interaction based on complexation with ligands.     

Efficient photochemical oxetane formation from 1-methyl-2,4,5-triphenylimidazole and benzophenones

In contrast to simple imidazoles, 1-methy1–2,4,5-triphenylimidazole ($\text{1}$) produced stable oxetane photoadducts $\text{3b}$ - $\text{e}$ with good efficiency upon irradiation in the presence of benzophenone derivatives $\text{2b}$ - $\text{e}$ in acetonitrile solution. Irradiation in the solid-phase was also studied. The oxetanes $\text{3b}$ - $\text{e}$ readily underwent cycloreversion by acid catalysis or by heating.     

Selective separation of Am(III) from lanthanides(III) by solvent extraction with hydrophobic field of "superweak" anion

The weakly coordinating hydrophobic anion TFPB-, whose surface is covered with a hydrophobic field, gives rise to a selective separation of Am(III) from lanthanides(III) in their solvent extraction even with a hard-donor extractant that shows no selectivity for Am(III) in traditional solvent extraction.