Novel ring transformation reactions of xanthine derivatives

The novel ring transformation reactions were found in the reactions of 1,3,7,9-tetra-alkyl-8,9-dihydroxanthines and acetylenic compounds. The reaction of the dihydroxanthine with DMAD gave a propellane type compound and with methyl propiolate afforded the similar type compound and a pyrimido[4,5-b]diazepine derivative. The mechanism of these reactions was also discussed.     

Studies on the synthesis of compounds related to adenosine 3',5'-cyclic phosphate. IX. Synthesis and cytotoxic effect of adenosine 3',5'-cyclic alkylphosphoramidates.

A series of adenosine 3',5'-cyclic monophosphoramidates (3, cAMP amidates), including long-chain alkyl amidates, were synthesized from adenosine 3',5'-cyclic monophosphate (1, cAMP) by means of a one-pot reaction. This reaction proceeded by the treatment of cAMP tributylammonium salt (2) with phosphorus pentachloride (PCl5) and alkylamine in N,N-dimethylformamide (DMF). Compounds 3 synthesized were investigated to determine their cytotoxic activities on the growth of mouse mastocytoma P-815 cells, mouse mammary tumor FM3A cells, and human mammary tumor ZR-75 cells in culture. It was found that compounds 3h-m showed significant cytotoxic activities against these cell lines, and that cAMP decylamidate (3j) was the most cytotoxic compound (the concentration required for 50% inhibition of cell growth, ID50 = 6.0, 15.0, 2.2 microM, respectively); the antitumor effect on P-815 cells by a total packed cell volume method showed 81.8% inhibition. The cytotoxic activity of 3 increased with the increase in alkyl chain length up to 10 carbon atoms and decreased in compounds having longer alkyl chain.     

Solvents inducing oxidation of hydroxylamines

Hydroxylamines gradually undergo oxidation to their oximes on being dissolved in organic solvent (e.g. methanol). This phenomenon was followed by (1)H-NMR and liquid chromatography-mass spectrometry (LC-MS). The oxidation rate was estimated from the peak area observed on the mass chromatogram at the protonated molecule or fragment ion on LC-atmospheric pressure chemical ionization (APCI)-MS. The results showed that the oxidation rate of hydroxylamines depended on the solvent type.     

Automated sample preparation using in-tube solid-phase microextraction and its application -- a review

Sample preparation, such as extraction, concentration, and isolation of analytes, greatly influences their reliable and accurate analysis. In-tube solid-phase microextraction (SPME) is a new effective sample preparation technique using an open tubular fused-silica capillary column as an extraction device. Organic compounds in aqueous samples are directly extracted and concentrated into the stationary phase of capillary columns by repeated draw/eject cycles of sample solution, and they can be directly transferred to the liquid chromatographic column. In-tube SPME is an ideal sample preparation technique because it is fast to operate, easy to automate, solvent-free, and inexpensive. On-line in-tube SPME-performed continuous extraction, concentration, desorption, and injection using an autosampler, is usually used in combination with high performance liquid chromatography and liquid chromatography-mass spectrometry. This technique has successfully been applied to the determination of various compounds such as pesticides, drugs, environmental pollutants, and food contaminants. In this review, an overview of the development of in-tube SPME technique and its applications to environmental, clinical, forensic, and food analyses are described.     

Lipase-catalyzed transformation of poly(lactic acid) into cyclic oligomers

Enzymatic transformations into cyclic oligomers were carried out with the objective of developing chemical recycling of poly(lactic acid)s, such as poly(D,L-lactic acid) (PDLLA), poly(D-lactic acid) (PDLA) and poly(L-lactic acid) (PLLA), which are typical biodegradable polymers. They were degraded by lipase in an organic solvent to produce the corresponding cyclic oligomer with a molecular weight of several hundreds. PDLLA (with a Mw of 84,000) was quantitatively transformed into cyclic oligomers by lipase RM (Lipozyme RM IM) in chloroform/hexane at 60 degrees C. PLLA (with a Mw of 120,000) was transformed into cyclic oligomer by lipase CA (Novozym 435) at a higher temperature of 100 degrees C in o-xylene. The oligomer structure was identified by 1H and 13C NMR spectroscopy and MALDI-TOF (matrix assisted laser desorption/ionization-time-of-flight) mass spectrometry.     

Ultrashallow depth profiling using SIMS and ion scattering spectroscopy

The accuracy of ultrashallow depth profiling was studied by secondary ion mass spectrometry (SIMS) and high‐resolution Rutherford backscattering spectroscopy (HRBS) to obtain reliable depth profiles of ultrathin gate dielectrics and ultrashallow dopant profiles, and to provide important information for the modeling and process control of advanced complimentary metal‐oxide semiconductor (CMOS) design. An ultrathin Si₃N₄/SiO₂ stacked layer (2.5 nm) and ultrashallow arsenic implantation distributions (3 keV, 1 × 10¹⁵ cm^?2) were used to explore the accuracy of near‐surface depth profiles measured by low‐energy O₂⁺ and Cs⁺ bombardment (0.25 and 0.5 keV) at oblique incidence. The SIMS depth profiles were compared with those by HRBS. Comparison between HRBS and SIMS nitrogen profiles in the stacked layer suggested that SIMS depth profiling with O₂⁺ at low energy (0.25 keV) and an impact angle of 78° provides accurate profiles. For the As⁺‐implanted Si, the HRBS depth profiles clearly showed redistribution in the near‐surface region. In contrast, those by the conventional SIMS measurement using Cs⁺ primary ions at oblique incidence were distorted at depths less than 5 nm. The distortion resulted from a long transient caused by the native oxide. To reduce the transient behavior and to obtain more accurate depth profiles in the near‐surface region, the use of O₂⁺ primary ions was found to be effective, and 0.25 keV O₂⁺ at normal incidence provided a more reliable result than Cs⁺ in the near‐surface region. Copyright © 2007 John Wiley & Sons, Ltd.     

PEGylated polyplex micelles from triblock catiomers with spatially ordered layering of condensed pDNA and buffering units for enhanced intracellular gene delivery

An A-B-C type triblock copolymer, tandemly aligning two types of polycations with different pKa values in a single polymer strand, was developed for the construction of novel polyplex micelles, satisfying a high DNA condensing ability as well as a proton buffering activity directed to elevating gene transfection. The micelle might feature the distinctive three-layered structure, where an inner polyplex layer of condensed pDNA with poly(l-lysine) (pKa approximately 9.4) as the C segment is successively wrapped with an intermediate layer of poly[(3-morpholinopropyl)aspartamide] (B segment) with a comparatively low pKa of approximately 6.2, to provide a buffering effect, and an outer PEG layer (A segment) as a biocompatible palisade.     

ACTION SPECTRUM FOR PHOTOREACTIVATION OF ULTRAVIOLET-INDUCED MORPHOLOGICAL ABNORMALITY IN SEA URCHIN EGGS

Abstract An action spectrum was obtained for photoreactivation (PR) of morphological abnormality arising from ultraviolet (UV)-irradiation of sea urchin sperm. The wavelength dependence of PR was measured by the restoration of the formation of normal pluteus larvae after the exposure of fertilized eggs to various fluences of monochromatic PR light (313 to 500 nm). The PR action spectrum showed a maximum around 365 nm and a secondary peak somewhere above 400 nm. High PR activity beyond 400 nm wavelengths may reflect an advantageous or adaptational ability to cope with harmful effects of solar UV radiation.     

3,4-dihydro-6,7-dimethoxy-4-methyl-3-oxo-qinoxaline-2-carbonyl azide as a highly sensitive fluorescence derivatization reagent for primary,secondary and tertiary alcohols in high-performance liquid chromatography

3,4-Dhydro-6,7-dimethoxy-4-methyl-3-oxo-quinoxaline-2-carbonyl azide is a highly senstive fluorescence derivatization reagent for primary, secondary and tertiary alcohols for high-performance liquid chromatography. Reaction conditions are optimized with benzyl alcohol, n-hexanol, cyclohexanol and 2-methyl-2-butanol. The reagent reacts with the alcohols in benzene to produce the corresponding fluorescent carbamic acid esters, which can be separated on a reversed-phase column YMC Pack C₈ with aqueous methanol as eluent. the detection limits for the alchols are 2–5 fmol per 10-μl njection. The reagent also reacts with hydroxysteroids with primary, secondary and/or tertiary alcoholic group(s) to form fluorescent derivatives. Hydroxycarboxylic acids and phenols do not give any chromatographic peaks.     

Room-temperature phosphorimetric determination of biogenic indole compounds adsorbed on a thin-layer chromatographic plate

A simple and sensitive method is described for the determination of biogenic indole compounds adsorbed on cellulose or alumina plates for thin-layer chromatography by room-temperature phosphorimetry. The optimum conditions were investigated for 5-hydroxyindole-3-acetic acid and indole-3-acetic acid. The compounds are spotted on the plates, which are then sprayed successively with sodium citrate or sodium acetate, and sodiu iodide solutions. The plates are dried completely under a stream of dry nitrogen, and immediately dipped in molten paraffin. The phosphorescence is stable for at least 3 h even in moist air. The limits of detection for nine biogenic indole compounds tested are between 2 and 300 pmol per sample spot.