Dependence of molecular recognition of fullerene derivative on the adlayer structure of zinc octaethylporphyrin formed on Au(100) surface

Adlayers of ZnOEP were prepared on reconstructed Au(100)-(hex) and unreconstructed Au(100)-(1 x 1) surfaces by immersing into a benzene solution containing ZnOEP molecules, and the adlayer structures were characterized by scanning tunneling microscopy (STM). A hexagonally arranged ZnOEP array was formed on an Au(100)-(hex) surface, whereas a rectangularly arranged ZnOEP array was found on an Au(100)-(1 x 1) surface. The adlayer structure of ZnOEP was dependent upon the underlying Au atomic arrangements. Furthermore, an investigation of the spuramolecular assembly for these modified surfaces was carried out by using an open-cage C(60) derivative (opened C(60)). A supramolecular assembled adlayer with a 1:1 composition of opened C(60)/ZnOEP was formed on Au(100)-(hex), whereas aggregates of opened C(60) were found on the ZnOEP-modified Au(100)-(1 x 1) surface. Electrochemical responses of opened C(60) were significantly influenced by underlying ZnOEP arrays. This finding suggests that precise control of underlying ZnOEP adlayers with the Au atomic structure is important to recognize the opened C(60) on them.     

Novel method to control release of lipophilic drugs with high potency from silicone

Silicone has been utilized as a carrier material for sustained release system of lipophilic drugs. Extensive studies revealed that drug release rate is influenced by factors such as physicochemical properties of the drug and additives.(1-5)) When a lipophilic drug is highly potent at low concentrations, the drug release rate should be strictly controlled so as to avoid side effects. In this study, using vitamin D(3) (VD(3)) as an example of such drugs, we investigated novel method to suppress initial burst and to modify drug release rate from silicone matrix. As a result, it was found that (a). addition of human serum albumin (HSA) suppressed initial burst and enhanced release rate in the later stage, resulting constant release of VD(3), (b). covering a matrix formulation with a membrane of low diffusivity (core-rod formulation) suppressed initial burst and released drug in a constant rate, and (3) using materials for which the drug has high affinity as dissolution solvent (reservoir formulation), the drug release rate was reduced.     

Determination of daidzein and genistein in soybean foods by automated on-line in-tube solid-phase microextraction coupled to high-performance liquid chromatography

An automated on-line method for the determination of the isoflavones, daidzein and genistein, was developed using in-tube solid-phase microextraction coupled to high-performance liquid chromatography (in-tube SPME-HPLC). In-tube SPME is a new extraction technique for organic compounds in aqueous samples, in which analytes are extracted from the sample directly into an open tubular capillary by repeated draw/eject cycles of sample solution. Daidzein, genistein and their glucosides tested in this study were clearly separated within 8 min by HPLC using an XDB-C8 column with diode array detection. In order to optimize the extraction of these compounds, several in-tube SPME parameters were examined. The glucosides daidzin and genistin were analyzed as aglycones after hydrolysis because the glucosides were not concentrated by in-tube SPME. The optimum extraction conditions for daidzein and genistein were obtained with 20 draw/eject cycles of 40 microl of sample using a Supel-Q porous layer open tubular capillary column. The extracted compounds were easily desorbed from the capillary by mobile phase flow, and carryover was not observed. Using the in-tube SPME-HPLC method, the calibration curves of these compounds were linear in the range 5-200 ng/ml, with a correlation coefficient above 0.9999 (n = 18), and the detection limits (S/N = 3) were 0.4-0.5 ng/ml. This method was successfully applied to the analysis of soybean foods without interference peaks. The recoveries of aglycones and glucosides spiked into food samples were above 97%.     

Pulse radiolysis of 4,4'-bipyridyl aqueous solutions at elevated temperatures: spectral changes and reaction kinetics up to 400 degrees C

The spectral changes as well as the reaction kinetics of the transient species of 4,4'-bipyridyl (4,4'-bpy) have been experimentally investigated by pulse radiolysis techniques up to 400 degrees C. The results show that the transient species such as OH adduct 4,4'-bpyOH*, monoprotonated electron adduct 4,4'-bpyH*, and doubly protonated electron adduct 4,4'-bpyH2+* have 15-20 nm blue shifts from room temperature to 400 degrees C. For a deaerated neutral solution of 4,4'-bpy in the presence of tert-butyl alcohol, ethanol, or NaCOOH, the doubly protonated electron adduct is the main transient species at room temperature. But at temperatures > 350 degrees C, a monoprotonated form, the N-hydro radical 4,4'-bpyH*, becomes predominant. Interestingly, at room temperature, CO2-* could not efficiently react with 4,4'-bpy, but the reaction was accelerated with increasing temperature; at 350 degrees C, this reaction completed within 2 mus. Using an alkaline solution (pH = 11.5) of 4,4'-bpy in the presence of tert-butyl alcohol, we studied the N-hydro radical 4,4'-bpyH* from room temperature to 400 degrees C at 25 MPa. An estimation of the temperature-dependent G(e(aq)-) at 25 MPa agrees with our previous result with methyl viologen as a scavenger.     

Regioselective synthesis and properties of novel [60]fullerene bisadducts containing a dibenzocrown ether moiety

The reactions of [60]fullerene with bis-o-quinodimethane precursors 3, 4, and 5 containing a dibenzo-18-crown-6, 24-crown-8 and 30-crown-10 moiety, respectively, were investigated. Both 3 and 4 provided trans-4 bisadducts 6a and 7a, respectively, as major product, though the selectivity in the latter was lower than that in the former. As minor product, 6b (cis-2) was produced from 3, while 7c (e) as well as 7b (cis-2) were produced from 4. Precursor 5 exclusively afforded e bisadduct 8 without any other regioisomers. These bisadducts showed different ionophoric properties from one another; for instance, 6a and 7b exhibited a high complexing ability toward the K+ ion, while 6b hardly showed complexation with any alkali metal ions. The selectivity coefficients (K(Na,K)(pot)) of 6a and 7b toward K+ over Na+ ion, determined with an ion-selective electrode, were much higher than that of dibenzo-18-crown-6.     

QUATERNARY STRUCTURE OF PEA PHYTOCHROME I DIMER STUDIED WITH SMALL-ANGLE X-RAY SCATTERING and ROTARY-SHADOWING ELECTRON MICROSCOPY

Abstract— The quaternary structure of pea phytochrome type I (PI) dimer in the red-light-absorbing form was studied by small-angle X-ray scattering (SAXS) technique and rotary-shadowing electron microscopy. Structural parameters for PI 114 kDa chromopeptide dimer and its tryptically digested N-terminal 59 kDa chromopeptide monomer, such as average electron density, molecular volume and the second moment of electron density distribution, were determined in terms of SAXS using the contrast variation method. Furthermore, by means of model simulation for the scattering profiles of the chromopeptides, most plausible structural models for both peptides were constructed. The distance between the chromophoric domains was estimated to be about 70 A in the resultant model for 114 kDa chromopeptide dimer. Furthermore, the model was consistent with the electron-micrographic images of both the intact PI dimer and the PI 114 kDa chromopeptide dimer, so that the N-terminal 7 kDa fragment did not significantly contribute the low-resolution images of the dimer.     

Regioselective 1,4-addition of nucleophiles to 1,3-diene monoepoxides catalyzed by palladium complex

1,3-Diene monoepoxides react with nucleophiles in the presence of palladium complex as a catalyst under neutral conditions to give 1,4-adducts selectively. The 1,4-adducts are allylic alcohols and there is a possibility of another nucleophilic attack. Ester of Monarch butterfly pheromone was prepared.     

Photophysical properties of oligo(2,3-thienyleneethynylene)s

Photophysical properties of oligo(2,3-thienyleneethynylene)s (nTE, n denotes the number of thiophene rings, n = 2, 3) in benzene were investigated using steady-state, time-resolved fluorescence, and transient absorption spectroscopies. For 2TE, generation of the radiative S2 and nonradiative S1 states was confirmed. Upon excitation, the S2 state was initially generated and deactivated to the S1 state within 10 ps. The S1 state exhibited the transient absorption band at 470 nm, of which the lifetime was estimated to be 5.3 ns. In the case of 3TE, on the other hand, it was revealed that the radiative S1 state with a transient absorption peak at 650 nm was generated upon excitation. The T1 states of nTE were generated from the S1 states. The quantum yields were estimated to be 0.52 and 0.54 for 2TE and 3TE, respectively. Extremely fast reactions in the higher triplet excited state were indicated for both 2TE and 3TE.     

Bromination by means of sodium monobromoisocyanurate (SMBI)

A variety of aromatic compounds with both activating and deactivating substituents were brominated with sodium monobromoisocyanurate (SMBI) 1, diethyl ether, diethyl ether-methanesulfonic acid, trifluoroacetic acid, or sulfuric acid were employed as solvents. Thus nitrobenzene was conveniently brominated in sulfuric acid, benzene was readily monobrominated in diethyl ether-methanesulfonic acid, and phenol was selectively brominated at the ortho position under mild conditions in refluxing diethyl ether. With substituents that are easily protonated, trifluoroacetic acid may be employed as solvent in the reaction with 1, in contrast NBS was ineffective in trifluoroacetic acid. This renders 1 a superior reagent relative to NBS. In addition to aromatics, alkenes, ketones and esters were also brominated with 1. Diethyl malonate was brominated with 1 and then subjected to a Bingel reaction with NaH to afford the desired methanofullerene in reasonable yield.