Preparation of monodisperse crosslinked polymelamine microcapsules by phase separation method

Monodisperse polymelamine microcapsules were prepared by phase separation method. Control of microcapsule diameter was investigated using the uniform-sized oil-in-water emulsion droplets as the capsule core. The monodisperse emulsion droplets were prepared using the Shirasu porous glass (SPG) membrane emulsification technique. The effects of the diameter of the oil droplet and concentration of sodium dodecyl sulfate (SDS), which is a typical emulsifier in SPG membrane emulsification, on microencapsulation were investigated. The microcapsules were aggregated when oil droplets with small size were microencapsulated at high SDS concentration. To reduce the SDS concentration, the creamed emulsion was used. The monodisperse polymelamine microcapsules were successfully prepared by using the creamed emulsion. The microcapsule diameter was almost similar to the diameter of the encapsulated oil droplet. The coefficient of variation values was about 10% for all microcapsules prepared in this study. Control of microcapsule diameter was achieved in the range of 5–60 μm.     

Dependence of single-molecule conductance on molecule junction symmetry

The symmetry of a molecule junction has been shown to play a significant role in determining the conductance of the molecule, but the details of how conductance changes with symmetry have heretofore been unknown. Herein, we investigate a naphthalenedithiol single-molecule system in which sulfur atoms from the molecule are anchored to two facing gold electrodes. In the studied system, the highest single-molecule conductance, for a molecule junction of 1,4-symmetry, is 110 times larger than the lowest single-molecule conductance, for a molecule junction of 2,7-symmetry. We demonstrate clearly that the measured dependence of molecule junction symmetry for single-molecule junctions agrees with theoretical predictions.     

Rhodopsin regeneration is accelerated via noncovalent 11-cis retinal-opsin complex--a role of retinal binding pocket of opsin

The regeneration of bovine rhodopsin from its apoprotein opsin and the prosthetic group 11-cis retinal involves the formation of a retinylidene Schiff base with the epsilon-amino group of the active lysine residue of opsin. The pH dependence of a Schiff base formation in solution follows a typical bell-shaped profile because of the pH dependence of the formation and the following dehydration of a 1-aminoethanol intermediate. Unexpectedly, however, we find that the formation of rhodopsin from 11-cis retinal and opsin does not depend on pH over a wide pH range. These results are interpreted by the Matsumoto and Yoshizawa (Nature 258 [1975] 523) model of rhodopsin regeneration in which the 11-cis retinal chromophore binds first to opsin through the beta-ionone ring, followed by the slow formation of the retinylidene Schiff base in a restricted space. We find the second-order rate constant of the rhodopsin formation is 6100+/-300 mol(-1) s(-1) at 25 degrees C over the pH range 5-10. The second-order rate constant is much greater than that of a model Schiff base in solution by a factor of more than 10(7). A previous report by Pajares and Rando (J Biol Chem 264 [1989] 6804) suggests that the lysyl epsilon-NH(2) group of opsin is protonated when the beta-ionone ring binding site is unoccupied. The acceleration of the Schiff base formation in rhodopsin is explained by stabilization of the deprotonated form of the lysyl epsilon-NH(2) group which might be induced when the beta-ionone ring binding site is occupied through the noncovalent binding of 11-cis retinal to opsin at the initial stage of rhodopsin regeneration, followed by the proximity and orientation effect rendered by the formation of noncovalent 11-cis retinal-opsin complex.     

Control of molecular interactions by the hollow of coordination cages

Coordination self-assembly entities have been demonstrated to be useful and powerful alternatives for the construction of predefined and well-organized architectures. Self-assembled coordination cages, which possess an inner hydrophobic cavity, can be utilized to move substrates closer by encapsulation so enabling their interaction with each other and exhibiting of non-classical physical properties.     

External electric field effects on fluorescence of pyrene butyric acid in a polymer film: concentration dependence and temperature dependence

Fluorescence spectra and electrofluorescence spectra (plots of the electric field-induced change in fluorescence intensity as a function of wavelength) have been measured at different temperatures for pyrene butyric acid (PBA) in a PMMA film at different concentrations. At a low concentration of 0.5 mol % where fluorescence emitted from the locally excited state of PBA (LE fluorescence) is dominant, LE fluorescence spectra show only the Stark shift in the presence of an electric field (F), which results from the difference in molecular polarizability between the ground and emitting states. At a high concentration of 10 mol % where the so-called sandwich-type excimer fluorescence (EX(1)) is dominant, both EX(1) and LE fluorescence are quenched by F. Another fluorescence assigned to a partially overlapped excimer (EX(2)) also exists at room temperature, and this emission is enhanced by F. As the temperature decreases, three fluorescence emissions whose electric field effects are different from each other become clear besides EX(1) and LE fluorescence, indicating that at least five fluorescence components exist at high concentrations at low temperatures. At a medium concentration of 5 mol % where EX(1) is comparable in intensity to the LE fluorescence, the intensity of EX(1) is not affected by F at any temperature, but LE fluorescence and EX(2) are markedly influenced by F at room temperature, and four fluorescence emissions are confirmed at low temperatures.     

Electroabsorption spectroscopy of 6-hydroxyquinoline doped in polymer films: Stark shifts and orientational effects

Stark absorption spectroscopy was applied to 6-hydroxyquinoline (6-HQ) doped in polymer films of poly(methyl methacrylate) (PMMA) and poly(vinyl alcohol) (PVA) at temperatures of 50-300 K. The electroabsorption (E-A) spectrum of 6-HQ markedly depends on temperature in a PMMA film. The polarization dependence as well as the temperature dependence of the E-A spectra reveals that 6-HQ is oriented along the direction of the applied electric field at room temperature in a PMMA film. As the temperature becomes lower, the field-induced orientation of 6-HQ is restricted, and only the Stark shift induced by a change in electric dipole moment and in molecular polarizability is observed. On the other hand, E-A spectra of 6-HQ doped in a PVA film are essentially independent of temperature, suggesting that 6-HQ is not oriented along the electric field even at room temperature in PVA. These results show that the molecular motion of 6-HQ in a polymer film is very sensitive to the microenvironment of the surrounding matrix.     

Development of a stable isotope dilution UPLC‐MS/MS method for quantification of dexmedetomidine in a small amount of human plasma

Dexmedetomidine (Dex) is a selective central α2‐agonist with anesthetic properties and has been used in clinical practice for sedation in the intensive care unit (ICU) after operations. In this study, an analytical assay for the determination of Dex in a small amount of plasma was developed for the application to pediatric ICU trials. The quantification of Dex was constructed using the original stable isotope Dex‐d₃ for electrospray ionization‐tandem mass spectrometry (ESI‐MS/MS) in the selected reaction monitoring mode. A rapid ultra‐performance liquid chromatography technique was adopted using ESI‐MS/MS with a runtime of 3 min. Efficacious concentration levels (50 pg/mL to 5 ng/mL) could be evaluated using a very small amount of plasma (10 μL) from patients. The lower limit of the quantification was 5 pg/mL in the plasma (100 µL). For sample preparation, a solid‐phase extraction was used along with the OASIS‐HLB cartridge type. Recovery values ranged from 98.8 to 100.3% for the intra‐ [relative standard deviation (RSD), 0.9–1.3%] and inter‐ (RSD, 0.9–1.5%) day assays. A stable test had recovery values that ranged from 97.8 to 99.7% with an RSD of 1.0–1.9% for the process/wet extract, bench‐top, freeze–thaw and long‐term tests. This method was used to measure the Dex levels in plasma from pediatric ICU patients. In the clinical ICU trial, the small amount of blood (approximate plasma volume, 200 μL) remaining from blood gas analysis was reused and targeted for the clinical analysis of Dex in plasma. Copyright © 2013 John Wiley & Sons, Ltd.     

Selective Host–Guest Interactions of a Transformable Coordination Capsule/Tube with Fullerenes

An M₂L₄ coordination capsule or an M₂L₂ coordination tube was selectively formed by the combination of Hg^II hinges and bent bispyridine ligands. The two structures reversibly interconvert at room temperature in response to modulation of the metal‐to‐ligand ratio and exhibit different host–guest interaction behavior. The capsule alone encapsulates large spherical molecules, fullerenes C₆₀ and C₇₀, and the bound guests are released upon capsule‐to‐tube transformation by the simple addition of metal ions.     

Synergic Catalysis of PdCu Alloy Nanoparticles within a Macroreticular Basic Resin for Hydrogen Production from Formic Acid

Highly dispersed PdCu alloy nanoparticles have been successfully prepared within a macroreticular basic resin bearing ?N(CH₃)₂ functional groups. This previously unappreciated combination of alloy is first proven to be responsible for the efficient production of high‐purity H₂ from formic acid (HCOOH) dehydrogenation for chemical hydrogen storage. By the addition of Cu, the electronically promoted Pd sites show significantly higher catalytic activity as well as a better tolerance towards CO poisoning as compared to their monometallic Pd counterparts. Experimental and DFT calculation studies revealed not only the synergic alloying effect but also cooperative action by the ?N(CH₃)₂ groups within the resin play crucial roles in achieving exceptional catalytic performances. In addition to the advantages such as, facile preparation method, free of additives, recyclable without leaching of active component, and suppression of unfavorable CO formation less than 3 ppm, the present catalytic system is cost‐effective because of the superior catalytic activity compared with that of well‐established precious PdAg or PdAu catalysts. The present catalytic system is particularly desirable for an ideal hydrogen vector in terms of potential industrial application for fuel cells.     

Study on the base-catalyzed reverse vinylogous aldol reaction of (4abeta,5beta)-4,4a,5,6,7,8-hexahydro-5-hydroxy-1,4a-dimethylnaphthalen-2(3H)-one under Robinson annulation conditions

[reaction: see text] We have proposed a pathway for the base-catalyzed reverse vinylogous aldol reaction of (-)-(4abeta,5beta)-4,4a,5,6,7,8-hexahydro-5-hydroxy-1,4a-dimethylnaphthalen-2(3H)-one [(-)-8] under Robinson annulation conditions. For confirmation, 4-(2,6-dimethyl-3-oxocyclohex-1-enyl)butanal (11) and 4-(2,6-dimethyl-5-oxocyclohex-1-enyl)butanal (12), both of which potentially produce enolate I, were synthesized regioselectively. Unexpectedly, 11 gave a complex mixture, including only a trace amount of (+/-)-8 (less than 5% yield), under these basic conditions. To the contrary, 12 cleanly afforded (+/-)-8 in 66% yield. This result provides evidence for our proposed mechanism of the above reaction.