Improvement of the physical properties of poly(methyl methacrylate) by copolymerization with N-pentafluorophenyl maleimide; zero-orientational and photoelastic birefringence polymers with high glass transition temperatures

Copolymers of N-pentafluorophenyl maleimide (PFPMI) with methyl methacrylate (MMA) were synthesized by a free radical initiator, such as AIBN. The refractive indexes of the copolymers remained nearly constant (1.4970 at 532 nm) regardless of the polymer composition. These copolymers also showed high thermal stability. The orientational and photoelastic birefringence of the copolymers obtained were measured. Since both of the orientational and photoelastic birefringences of PMMA are negative whereas poly(PFPMI) exhibits positive, thus we have obtained nearly zero orientational and photoelastic birefringence polymers when the ratios of MMA/PFPMI were 91.8/8.2 and 97.0/3.0 mol%, respectively. Based on the experimental data, the ratios of MMA/PFPMI for zero birefringence were determined to be 88.9/11.1 and 93.8/6.2 mol% for orientational and photoelastic birefringence, respectively. The Tgs of corresponding copolymers were estimated to be 128 and 122 ℃.     

Preparation of Titania from Tetrakis(diethylamino)titanium via Hydrolysis

The conversion of tetrakis(diethylamino)titanium (Ti(NEt₂)₄) into titania via either a combination of hydrolysis (Ti(NEt₂)₄ : THF : H₂O = 1 : 10 : x, x = 2, 4, 10) at ambient conditions and calcination (method A) or hydrolysis in a water-tetrahydrofuran (THF) mixture (Ti(NEt₂)₄ : THF : H₂O = 1 : 10 : 100) at reflux (method B) was investigated. Titanium tertiary butoxide (Ti(O ^t Bu)₄) was also used as a substitute for Ti(NEt₂)₄. The hydrolysis via method A resulted in the formation of amorphous solids containing organics. Thermal analyses showed that the hydrolysis products showed mass losses up to 500°C probably due to the presence of diethylamine (Et₂NH) formed via the hydrolysis of Ti(NEt₂)₄ in the hydrolysis products, while a mass loss of the hydrolysis product from Ti(O ^t Bu)₄ was completed up to about 200°C. After calcination at 600°C, anatase or a mixture of anatase and rutile was obtained. The crystallization behavior of the hydrolysis products from Ti(NEt₂)₄ was different from that of the hydrolysis product from Ti(O ^t Bu)₄. The hydrolysis via method B gave only an amorphous material from Ti(NEt₂)₄, while a crystalline titania (anatase and brookite) formed from Ti(O ^t Bu)₄.     

Interpretation of Hund's multiplicity rule for the carbon atom

Hund's multiplicity rule is investigated for the carbon atom using quantum Monte Carlo methods. Our calculations give an accurate account of electronic correlation and obey the virial theorem to high accuracy. This allows us to obtain accurate values for each of the energy terms and therefore to give a convincing explanation of the mechanism by which Hund's rule operates in carbon. We find that the energy gain in the triplet with respect to the singlet state is due to the greater electron-nucleus attraction in the higher spin state, in accordance with Hartree-Fock calculations and studies including correlation. The method used here can easily be extended to heavier atoms.     

Thermodynamic properties of the Cu-Au system using a face-centered-cubic lattice model with a renormalized potential

A Monte Carlo simulation is carried out to study thermodynamic properties of Cu-Au alloys using a face-centered-cubic (fcc) lattice-gas model. To obtain quantitatively accurate results, a Finnis-Sinclair-type potential, which has been widely used for molecular dynamics (MD) simulations, is employed. To overcome some shortcomings of lattice-gas models such as neglecting vibrational entropy, the potential is mapped onto the fcc lattice using the renormalization technique. The renormalized potential gives an improved Cu-Au phase diagram compared to the original MD potential applied directly on the lattice.     

Thermal latency of novel chelating borate catalysts as latent catalysts for epoxy–phenolic resins

Novel quaternary ammonium bis(2‐oxybenzoyloxy)borate salts ( 1a – 1c ) or quaternary ammonium bis(1,2‐benzenedioxy)borate salts ( 2a and 2b ) with tetra‐n‐butylammonium (TBA⁺), tetra‐n‐octylammonium (TOA⁺), or bis(triphenylphosphoranylidene)ammonium (PNP⁺) cations were synthesized as latent catalysts of epoxy/phenol–novolac resins by the complexation between boric acid and salicylic acid or catechol, followed by neutralization with quaternary ammonium hydroxide. Polyaddition reactions of diglycidyl ether of bisphenol A (DGEBA) and 4,4′‐bisphenol F (44BPF) or bisphenol F (BPF‐D) with the ammonium borates were investigated as model reactions of epoxy/phenol–novolac resin systems with respect to the thermal latency and storage stability of the catalyst. The polyaddition of DGEBA/44BPF with 1a – 1c in diglyme at 150 °C for 6 h proceeded up to 85–96% conversions and gave polymers with number‐average molecular weights of 4180–10,500, whereas the polyaddition at 80 °C for 6 h gave less than 8% conversions. However, the polyaddition with 2a containing TBA⁺ cation proceeded to only a 32% conversion at 150 °C for 6 h in diglyme and to a 64% conversion even at 180 °C for 6 h in triglyme and only gave low molecular weight oligomers, and no reaction proceeded in the polyaddition at 80 °C. However, polyaddition with 2b containing PNP⁺ cation proceeded up to a 96% conversion at 150 °C for 6 h in diglyme and gave a higher molecular weight polymer with a number‐average molecular weight of 8050, whereas the polyaddition at 80 °C for 6 h gave only a 5% conversion. The catalytic activity of ammonium borates 1a – 1c and 2a and 2b depended on the borate anion structure: 1a and 1c with bis(2‐oxybenzoyloxy)borate anion revealed higher activity than 2a and 2b with bis(1,2‐benzenedioxy)borate anion, respectively. In comparison with tetra‐n‐butylammonium bromide (TBAB) as a conventional ammonium salt or tetra‐n‐butylammonium tetrakis(benzoyloxy)borate (TBA‐TBB), 1a – 1c and 2b revealed better thermal latency. The catalytic activity of ammonium borates also depended on the bulkiness of the ammonium cation, and the order of activity was 1c (PNP⁺) > 1b (TOA⁺) ≧ 1a (TBA⁺) and 2b (PNP⁺) > 2a (TBA⁺). The storage stability of DGEBA/BPF‐D with the ammonium borate catalysts 1a – 1c and 2a and 2b in bulk at 40 °C was much better than that with TBAB and TBA‐TBB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2702–2716, 2002     

Theoretical Study of Clathrate Hydrates with Multiple Occupation

In this work, the electronic, structural, dynamic andthermodynamic properties of structure II, H and tetragonalAr clathrate hydrates have been calculated and the effectof multiple occupancy on their stability has been examinedusing first-principles and lattice dynamics calculations.The dynamic properties of these clathrates have beeninvestigated depending on the number of guest moleculesin a clathrate cage. It has been found that selectedhydrate structures are dynamically stable. The calculatedcell parameters are in agreement with experimental data.We also report the results of a systematic investigationof cage-like water structures using first-principles calculations. Ithas been observed that Ar clusters can be stabilized indifferent water cages and the stability is strongly dependenton the number of argon atoms inside the cages.     

One-pot synthesis of N-acyl-substituted sulfamides from chlorosulfonyl isocyanate via the Burgess-type intermediates

The title N-alkoxycarbonyl- or N-aryloxycarbonyl-substituted sulfamides were synthesised in one-pot in efficient yields from chlorosulfonyl isocyanate (CSI), alcohols and aqueous (or dry) amines via the corresponding water-resistant intermediates, carboxysulfamoylammonium salts (Burgess-type reagents), which were generated in situ by the deactivation of the corresponding water-sensitive N-(chlorosulfonyl)carbamates with tertiary amines.     

Ruthenium-catalyzed one-pot hydroformylation of alkenes using carbon dioxide as a reactant

A new hydroformylation of alkenes using carbon dioxide as a reactant is shown to take place in the presence of ruthenium cluster complexes and halide salts. Similar or even better yields of alcohols were formed as compared to the conventional hydroformylation with CO under the same reaction conditions. The reaction proceeded in three steps: CO₂ is first converted to CO; then it is used as a reagent for hydroformylation to give aldehyde; subsequently, it is hydrogenated to alcohol. ESI-mass spectrometric analyses of the reaction solutions indicated formation of four kinds of ruthenium anionic complexes including tetra-, tri-, and mononuclear species. On the basis of experimental findings, possible roles of these complexes are discussed.     

Stereoselective synthesis of procyanidin B3-3-O-gallate and 3,3″-di-O-gallate, and their abilities as antioxidant and DNA polymerase inhibitor

A simple method for the synthesis of procyanidin B3 substituted with a galloyl group at the 3 and 3″ position is described. Condensation of a benzylated catechin-3-O-gallate electrophile with a nucleophile, catechin and catechin-3-O-gallate, proceeded smoothly and stereoselectively to afford the corresponding dimer gallates, procyanidin B3-3-O-gallate and procyanidin B3-3,3″-di-O-gallate, in good yields. Further, their antioxidant activities on UV-induced lipid peroxide formation, DPPH radical scavenging activity and inhibitory activity of DNA polymerase were also investigated. Among three procyanidin B3 congeners (procyanidin B3, 3-O-gallate and 3,3″-di-O-gallate), the 3,3″-di-O-gallate derivative showed the strongest antioxidant and radical scavenging activity. Interestingly, the 3-O-gallate derivative was the strongest inhibitor of mammalian DNA polymerase with IC₅₀ value of 0.26 μM, although it showed the weakest antioxidant and radical scavenging activity. It became apparent that the presence of a galloyl group at the C-3 position in the proanthocyanidin oligomer was very important for biological activity, however, the antioxidant activity of these compounds was not parallel to the DNA polymerase inhibitory activity.     

Alternating copolymers of hexafluoroisobutylene with vinyl trifluoroacetate and vinyl pentafluorobenzoate

Copolymerizations of hexafluoroisobutylene (HFIB) with vinyl pentafluorobenzoate (VPFB) and vinyl trifluoroacetate (VTFA) were carried out in bulk using perfluorodibenzoyl peroxide as the radical initiator. The copolymers obtained were characterized by proton and fluorine NMR spectroscopy. The monomer reactivity ratios in the polymerization of HFIB with VPFB were r₁ (HFIB) = 0, r₂ (VPFB) = 0.373, and r₁r₂ = 0. The results indicated that these copolymers have alternating structures. Similarly, the copolymers of HFIB and VTFA also showed alternating structures. The films of HFIB‐co‐VPFB were prepared by casting THF solution of polymers. Films obtained were flexible and transparent. The refractive indices of copolymers were 1.4549, 1.4490, and 1.4438 at 532, 633, and 839 nm, respectively. The average T_gs of HFIB‐co‐VTFA and HFIB‐co‐VPFB were 52 and 71 °C, respectively. From these results, the T_g of the hypothetical HFIB homopolymer is postulated to be in between 70 and 90 °C, which may be useful in the assessment of T_gs of HFIB copolymers with other vinyl monomers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012