Improved detectability with a polymer-based trapping device in rapid HPLC analysis for ultra-low levels of bisphenol A (BPA) in environmental samples.

A new high-performance liquid chromatography (HPLC) method has been developed to detect ultra-low concentrations of bisphenol-A (BPA) (below 1 ng/L (ppt)) using column switching electrochemical detection (ECD). The results were superior to those obtained from manual pretreatment procedure with membrane stationary phase. BPA is inherently ubiquitous in the environment, including tools and solvents used for its analysis; to obtain meaningful results, therefore, the concentration of the overall BPA contamination must be below the detection limit for BPA using the analytical system. Therefore, purified water for preparing the standard BPA solution must be filtered with a hydrophobic membrane to suppress BPA background levels of contamination. In addition, we investigated methods for effectively preserving environmental water containing BPA. The addition of a small amount of ethylenediaminetetraacetic acid (EDTA) provided good recovery even after overnight storage. By employing these precautionary measures and procedures to reduce BPA contamination from the analytical procedure, we could accurately determine l(-10) ppt of BPA in environmental water samples using a column switching HPLC system.     

Memory effect in CuAsSe glasses containing small amounts of Au

The Cu, As and Se contents of Au-containing CuAsSe glasses significantly affected both the resistivity in the memory state and the time required to reach the memory state, whereas the Au content affects only the latter. The main crystalline species formed in these glasses was a CuAsSe compound, and its formation was enhanced by the addition of Au. The role of Au in the memory effect was discussed on the basis of crystallization behavior of glasses.     

High-pressure phases of hydrogen cyanide: formation of hydrogenated carbon nitride polymers and layers and their electronic properties

We have performed a set of first-principles simulations to consider the possible phase transitions in molecular crystals of HCN under high pressure. Our calculations reveal several transition paths from the orthorhombic phase to tetragonal and then to triclinic phases. The transitions from the orthorhombic to the tetragonal phases are of the second order, whereas those from the tetragonal to the triclinic phases turn out to be of the first-order type and characterized by an abrupt decrease in volume. Our calculations show that, by adjustment of the temperature and pressure of the HCN molecular crystal, novel layered and polymeric crystals with insulating, semiconducting or metallic properties can be found. Based on our simulation results, two different crystal formation mechanisms are deduced. The stabilities of the predicted structures at ambient pressure are further assessed by performing phonon or MD simulations. In addition, the electron transport properties of the predicted polymers are obtained using the non-equilibrium Green's function technique combined with density functional theory. The results show that the polymers have metallic-like I-V characteristics.     

Sorption of water vapor into polyelectrolyte complex of poly(styrenesulfonic acid)/poly(4-vinyl-N-ethylpyridinium bromide)

Successive differential and integral sorptions of water vapor into the polyelectrolyte complex of poly (sty renesulfonic acid) / poly(4-vinyl-N-ethylpyridinum bromide) have been measured; films of stoichiometric (1/1 molar ratio) and nonstoichiometric (2/1 molar ratio) complex were employed in the experiments. Sorption isotherms have been also determined by using the values obtained from integral sorption experiments. The sorption data have suggested the following. (i) The rearrangement of polymer chains plays a relatively unimportant role in sorption of water. (ii) The relaxation motion of network chains is suppressed. (iii) The change of morphological structure caused by vapor sorption is obscure. (iv) The ionic character of the 1/1 complex is higher than that of 2/1 complex. (v) A small amount of water can be dispersed on specific polymer sites, but the sorption of a large amount of water is accompanied by an expansion of network structure. Points (i)-(v) have been consistently interpreted on the basis of the network structure and ionic character of this complex.     

Hydrogen bond lifetimes in supercritical methanol–water mixtures via MD simulation

Dynamical features of hydrogen bonds in methanol–water mixtures have been analysed in terms of lifetime in the wide range of conditions, including supercritical states, using a molecular dynamics simulation with flexible potential models. Hydrogen bond characteristics in methanol–water mixtures were investigated by considering the combination of molecular species and donor–acceptor of hydrogen-bonded molecules. The hydrogen bond lifetimes mainly depend on temperature, and those in supercritical condition were about 1/10th of that at ambient condition. Focusing on the composition dependence of the hydrogen bond lifetime, the unique behaviour of that resulting from hydration structure was observed. Moreover, the molecular combination, which showed the largest hydrogen bond lifetime, was different for ambient and high temperature and high pressure conditions. The relationship between hydrogen bond lifetime and molar volume was also calculated to discuss the hydrogen bond lifetime in terms of the collision frequency of molecules and the intermolecular distance.     

Ferroelectric phase transitions in ultrathin films of BaTiO3

We present molecular dynamics simulations of a realistic model of an ultrathin film of BaTiO3 sandwiched between short-circuited electrodes to determine and understand effects of film thickness, epitaxial strain, and the nature of electrodes on its ferroelectric phase transitions as a function of temperature. We determine a full epitaxial strain-temperature phase diagram in the presence of perfect electrodes. Even with the vanishing depolarization field, we find that ferroelectric phase transitions to states with in-plane and out-of-plane components of polarization exhibit dependence on thickness; it arises from the interactions of local dipoles with their electrostatic images in the presence of electrodes. Secondly, in the presence of relatively bad metal electrodes which only partly compensate the surface charges and depolarization field, a qualitatively different phase with stripelike domains is stabilized at low temperature.     

Enhancement of sonochemical reaction of terephthalate ion by superposition of ultrasonic fields of various frequencies

The ultrasonic reactor with dual frequency was used and the effect of frequency on the fluorescence intensity of terephthalate ion was experimentally investigated in the frequency range from 176 to 635 kHz. The sonochemical reaction fields were visualized by using sonochemical luminescence of luminol solution. Compared with the fluorescence intensity of terephthalate ion for single frequency, the fluorescence intensity for dual frequency increased. The fluorescence intensity ratio of dual frequency to single frequency had maximum value when the frequency of transducer attached at the bottom wall was comparable in magnitude to that at the side wall. In the case of dual frequency, the sonochemical reaction fields became more extensive in the reactor and more intensive around the center of the reactor.     

Optimization of mark edge recording waveform for a phase change rewritable optical disk using a 680 nm laser diode

A high density mark edge recording method on a phase change rewritable disk is reported. A carrier-to-noise ratio of 55 dB for a mark length of 0.55,μm is obtained by using a 680 nm, NA 0.6 head and a phase change rewritable disk. In mark edge recording, it is necessary to record each mark in correct length. A new laser power modulation pattern is proposed. This pattern consists of a first-pulse, a multi-pulse chain and a last-pulse. Both positions of the first-ptilse and the last-pulse are movable. By adjusting these positions, a jitter, σ/T_w (T_w is window margin), is improved to 6.5% in high density EFM (Eight to Fourteen Modulation) recording of 0.4 μm/bit.     

Molecular dynamics simulations of structural disordering and forming defects in a milling process for selenium

In our previous paper, structural changes of selenium powders ground by a planetary ball mill at various rotational speeds were investigated for the nanostructural modification of particles using mechanical grinding process. The experimental results indicated that the amorphisation of Se by grinding accompanies lattice strain, and the lattice strain arises from impact energy which is more than an energy related to intermolecular interaction. In this paper, molecular dynamics simulations of selenium have been carried out under compressing conditions of various pressure strengths for obtaining information of the lattice strain at atomic level. Then, dynamical behaviour of atomic configuration has been discussed in this process. The structural disordering and formation of the structural defects were estimated by deviations of bond length and angle and the number of created defects before and after compressing from simulated results. The disordering took place during compressing at various pressure strengths, and the disordered atoms return to their initial positions at lower pressure. Stable disordered state and defects after the compression can however remain by compression at more than a certain pressure strength mainly associated with binding energy of selenium.