Immobilization of cytochrome P-450 and electrochemical control of its activity

P-450_cam (camphor-induced cytochrome P-450) was immobilized on an indium tin oxide (ITO) electrode by polypyrrole and its activity was controlled electrochemically. The results showed that P-450_cam was immobilized on the ITO electrode without denaturing and the amount of P-450_cam could be easily controlled. When, the electric potential was swept repeatedly between 0.4 and 0 V, the remarkable decrease of oxygen in the reaction mixture solution was observed only in the presence of camphor. In addition, hydroxycamphor was detected only in the same system by means of gas chromatography/mass spectroscopy. These results suggested that immobilized P-450_cam catalyzed the hydroxylation of camphor by the supply of electron from the electrode. The effect of pH and ionic strength on the activity was examined, and it was found that the high activity expressed at the pH of 6.0 – 7.0 and KCl concentration of 0.1 – 0.2 M . The paper is the first report that P-450 enzyme activity could be controlled artificially. © 1998 John Wiley & Sons, Ltd.     

Optical Sensing by Silica/Titania Thin Films Doped with Oxacarbocyanine Dye

Photocurrent responses of sol-gel films of silica/titania doped with oxacarbocyanine dye were investigated with a sandwich-type photocell constructed with polymer electrolyte membrane and indium-tin-oxide glass electrodes. At an equilibrium and positive bias voltages, a typical photocell exhibited negative and positive current peaks when the visible light illumination was on and off, respectively. The wavelength dependence of the photocurrent responses well matched to the absorption band of the doped dye. This differential photocurrent response was attributed to trapping of carriers photoexcited in the dye molecules at the defect states in the matrix film. At negative bias voltages, on the other hand, the cell exhibited constant, negative photoelectrochemical currents under illumination. These differential and linear photocurrent responses were affected by the SiO₂/TiO₂ matrix structures depending on the Si : Ti ratio.     

Dimeric copper(II) 3,3‐dimethyl­butyrate adducts with ethanol, 2‐methylpyridine, 3‐methylpyridine, 4‐methylpyridine and 3,3‐dimethylbutyric acid

In the crystals of the five title compounds, tetrakis‐(μ‐3,3‐dimethylbutyrato‐O:O′)bis(ethanol‐O)dicopper(II)–ethanol (1/2), [Cu₂(C₆H₁₁O₂)₄(C₂H₆O)₂]·2C₂H₆O, (I), tetrakis(μ‐3,3‐dimethylbutyrato‐O:O′)bis(2‐methylpyridine‐N)di­copper(II), [Cu₂(C₆H₁₁O₂)₄(C₆H₇N)₂], (II), tetrakis‐(μ‐3,3‐dimethylbutyrato‐O:O′)bis(3‐methylpyridine‐N)di‐copper(II), [Cu₂(C₆H₁₁O₂)₄(C₆H₇N)₂], (III), tetrakis‐(μ‐3,3‐dimethylbutyrato‐O:O′)bis(4‐methylpyridine‐N)di‐copper(II), [Cu₂(C₆H₁₁O₂)₄(C₆H₇N)₂], (IV), and tetrakis‐(μ‐3,3‐dimethylbutyrato‐O:O′)bis(3,3‐dimethylbutyric acid‐O)dicopper(II), [Cu₂(C₆H₁₁O₂)₄(C₆H₁₂O₂)₂], (V), the di­nuclear Cu^II complexes all have centrosymmetric cage structures and (IV) has two independent molecules. The Cu?Cu separations are: (I) 2.602 (3) Å, (II) 2.666 (3) Å, (III) 2.640 (2) Å, (IV) 2.638 (4) Å and (V) 2.599 (1) Å.     

Dimeric copper(II) trimethylsilyl­acetate adducts with pyridine, 2‐­methylpyridine, 3‐methylpyridine and quinoline,and a polymeric copper(II) trimethylsilylacetate

In the crystals of bis(pyridine‐N)tetrakis(μ‐trimethylsilylacetato‐O:O′)dicopper(II), [Cu₂(C₅H₁₁O₂Si)₄(C₅H₅N)₂], (I), the dinuclear Cu^II complexes have cage structures with Cu?Cu distances of 2.632 (1) and 2.635 (1) Å. In the crystals of bis(2‐­methylpyridine‐N)tetrakis(μ‐trimethylsilylacetato‐O:O′)dicopper(II), [Cu₂(C₅H₁₁O₂Si)₄(C₆H₇N)₂], (II), bis­(3‐methylpyridine‐N)tetrakis(μ‐trimethylsilylacetato‐O:O′)dicopper(II), [Cu₂(C₅H₁₁O₂Si)₄(C₆H₇N)₂], (III), and bis(quinoline‐N)­tetrakis(μ‐­trimethylsilylacetato‐O:O′)dicopper(II), [Cu₂(C₅H₁₁O₂Si)₄(C₉H₇N)₂], (IV), the centrosymmetric dinuclear Cu^II complexes have a cage structure with Cu?Cu distances of 2.664 (1), 2.638 (3) and 2.665 (1) Å, respectively. In the crystals of catena‐poly­[tetrakis(μ‐trimethylsilylacetato‐O:O′)dicopper(II)], [Cu₂(C₅H₁₁O₂Si)₄]_n, (V), the dinuclear Cu^II units of a cage structure are linked by the cyclic Cu—O bonds at the apical positions to form a linear chain by use of a glide translation.     

The synthesis of benzofuroquinolines. I. Some benzofuro[2,3-b]quinoline and benzofuro[3,2-c]quinoline derivatives

Benzofuro[2,3-b]quinoline ( Ia ) and its 11-methyl derivative ( Ib ) were synthesized by demethylcyclization of 3-(o-methoxyphenyl)-1,2-dihydroquinolin-2-ones (VIa,b). Benzofuro[2,3-b]quinoline-11-carboxylic acid (Id) was synthesized by chlorination followed by the action of potassium hydroxide of a lactone (IX) prepared by demethyl-cyclization of 3-(o-methoxyphenyl)-2-oxo-1,2-dihydroquinoline-4-carboxylic acid (VIII). Isomeric benzofuro[3,2-c]quinoline (Ha) and its 6-methyl derivative (IIb) were synthesized by demethyl-cyclization of 3-(o-methoxyphenyl)-1,4-dihydroquinolin-4-ones (XIa,b). Both the methyl derivatives (Ib and IIb) were converted to the carboxylic acids (Id and IId) through condensation with benzaldehyde followed by oxidation. The benzofuroquinolines (Ia,b,d and IIa,b) thus obtained were oxidized to the corresponding N-oxides (IIIa,b,d and IVa,b).     

pH‐Responsive Pharmacological Chaperones for Rescuing Mutant Glycosidases

A general approach is reported for the design of small‐molecule competitive inhibitors of lysosomal glycosidases programmed to 1) promote correct folding of mutant enzymes at the endoplasmic reticulum, 2) facilitate trafficking, and 3) undergo dissociation and self‐inactivation at the lysosome. The strategy is based on the incorporation of an orthoester segment into iminosugar conjugates to switch the nature of the aglycone moiety from hydrophobic to hydrophilic in the pH 7 to pH 5 window, which has a dramatic effect on the enzyme binding affinity. As a proof of concept, new highly pH‐responsive glycomimetics targeting human glucocerebrosidase or α‐galactosidase with strong potential as pharmacological chaperones for Gaucher or Fabry disease, respectively, were developed.     

Determination of soluble bromine in an extra-high-pressure mercury discharge lamp by sodium hydroxide decomposition-suppressed ion chromatography.

We have established a simple method for assaying the quantity of soluble bromine in the discharge tubes of an extra-high-pressure mercury discharge lamp. Each discharge tube is destroyed in 5 ml of 10 mM sodium hydroxide, and the recovered sodium hydroxide solution is analyzed by suppressed-ion chromatography using gradient elution. We have clarified that this method can assay less than 1 microg of soluble bromine in a discharge tube.     

Short-step synthesis of droloxifene via the three-component coupling reaction among aromatic aldehyde, cinnamyltrimethylsilane, and β-chlorophenetole

A short-step route for the preparation of droloxifene has been established via the novel three-component coupling reaction among 3-pivaloyloxybenzaldehyde, cinnamyltrimethylsilane, and β-chlorophenetole, the successive installation of the side-chain part, and the base-induced migration of the double bond. The present synthesis of tetra-substituted ethylene moieties is a widely applicable strategy for producing a variety of SERMs (selective estrogen receptor modulators) and SARMs (selective androgen receptor modulators), such as tamoxifen, raloxifene, and other compounds that can lead to new drugs.