Characterization of posticlure and the structure-related sex pheromone candidates prepared by epoxidation of (6Z,9Z,11E)-6,9,11-trienes and (3Z,6Z,9Z,11E)-3,6,9,11-tetraenes

trans-11,12-Epoxy-(6Z,9Z)-6,9-henicosadiene (posticlure) has been identified from a pheromone gland of the lymantriid species, Orgyia postica. Since the diversity of Lepidoptera suggests that some species utilize the structure-related epoxy compound as a sex pheromone component, epoxydienes and epoxytrienes derived from (6Z,9Z,11E)-6,9,11-trienes and (3Z,6Z,9Z,11E)-3,6,9,11-tetraenes with a C₁₉–C₂₁ chain were systematically synthesized and the chemical data were accumulated in order to contribute to a new pheromone research. Peracid oxidation of each triene and each tetraene produced, respectively, a mixture of three epoxydienes (cis-6,7-epoxy-9,11-diene; cis-9,10-epoxy-6,11-diene; and trans-11,12-epoxy-6,9-diene) and four epoxytrienes (cis-3,4-epoxy-6,9,11-triene; cis-6,7-epoxy-3,9,11-triene; cis-9,10-epoxy-3,6,11-triene; and trans-11,12-epoxy-3,6,9-triene). While the 9,10-epoxy compounds were unstable and, interestingly, converted into 9-ketone derivatives after chromatography over SiO₂, each positional isomer was isolated by HPLC equipped with an ODS column, and the chemical structure was determined by NMR analysis. On the GC-MS analysis with a DB-23 column, the positional isomers were also eluted separately and characteristic mass spectra were proposed. By comparing the spectral data of the epoxy compounds with a different carbon chain, diagnostic fragment ions reflecting the chemical structure were determined as follows: m/z 79, 109, 113, and M-114 for the 6,7-epoxydienes; m/z 69, 97, 111, 139, and M-111 for the 9,10-epoxydienes; m/z 57, 79, 109, 136, M-151, and M-111 for the 11,12-epoxydienes; m/z 79, 91, 105, and 119 for the 3,4-epoxytrienes; m/z 79, 124, M-124, M-96, and M-69 for the 6,7-epoxytrienes; m/z 79, 95, 109, 137, and M-108 for the 9,10-epoxytrienes; and m/z 79, 134, M-149, M-109, and M-95 for the 11,12-epoxytrienes.     

Ni-catalyzed α-arylation of secondary α-bromo-α-fluoro-β-lactam: cross-coupling of a secondary fluorine-containing electrophile

A highly diastereoselective cross-coupling reaction of an α-bromo-α-fluoro-β-lactam with a wide range of aryl Grignard reagents was catalyzed by Ni/bis(oxazoline) in yields of up to 98%. The product was obtained diastereoselectively as an anti-isomer. This is the first successful α-arylation of an α-fluoro-β-lactam to produce diverse α-aryl-α-fluoro-β-lactams.     

Synthetic Studies on Sialoglycoconjugates 40: Stereocontrolled Synthesis of Sialyl Lewis X Epitope and Its Ceramide Derivative

Abstract

Stereocontrolled synthesis of sialyl Le^x epitope and its ceramide derivative with regard to the introduction of galactose or β-D-galactosyl ceramide into the terminal N-acetylglucosamine residue of sialyl Le^x determinant is described. Königs-Knorr condensation of 2-(trimethylsilyl)ethyl 2, 4, 6-tri-O-benzyl-β-D-galactopyranoside (4) with 3, 4, 6-tri-O-acetyl-2-deoxy-2-phthalimido-D-glucopyranosyl bromide (5) gave the desired β-glycoside 6, which was converted into 2-(trimethylsilyl)ethyl O-(2-acetamido-4, 6-O-benzylidene-2-deoxy-β-D-glucopyranosyl)-(l→3)-2, 4, 6-tri-O-benzyl-β-D-galactopyranoside (8) via removal of the phthaloyl and O-acetyl groups, followed by N-acetylation and 4, 6-O-benzylidenation. Glycosylation of 8 with methyl 2, 3, 4-tri-O-benzyl-1-thio-β-L-fucopyranoside (9) gave the α-glycoside (10), which was transformed by reductive ring-opening of the benzyliderie acetal into the acceptor (11). Dimethyl(methylthio)sulfonium triflate (DMTST)-promoted coupling of 11 with methyl O-(methyl 5-acetamido-4, 7, 8, 9-tetra-O-acetyl-3, 5-dideoxy-D-glycero-α-D-galacto-2-nonulopyranosylonate)-(2→3)-2, 4, 6-tri-O-benzoyl-l-thio-β-D-galactopyra-noside (12) afforded the desired pentasaccharide (13), which was converted into the α-trichloroacetimidate 16 via reductive removal of the benzyl groups, then O-acetylation, removal of the 2-(trimethyIsilyl)ethyl group and treatment with trichloroacetonitrile. Condensation of 16 with (2S, 3R, 4E)-2-azido-3-O-benzoyl-4-octadecene-l, 3-diol (18) gave the β-glycoside 19, which was transformed into the title compound 21, via reduction of the azido group, coupling with octadecanoic acid, O-deacylation and hydrolysis of the methyl ester group. On the other hand, O-deacylation of 13 and subsequent hydrolysis of the methyl ester group gave the pentasaccharide epitope 17.     

Syntheses and Properties of Graphyne Fragments: Trigonally Expanded Dehydrobenzo[12]annulenes

We present herein the synthesis and properties of the largest hitherto unknown graphyne fragment, namely trigonally expanded tetrakis(dehydrobenzo[12]annulene)s (tetrakis‐DBAs). Intramolecular three‐fold alkyne metathesis reactions of hexakis(arylethynyl)DBAs 9 a and 9 b using Fürstner’s Mo catalyst furnished tetrakis‐DBAs 8 a and 8 b substituted with tert‐butyl or branched alkyl ester groups in moderate and fair yields, respectively, demonstrating that the metathesis reaction of this protocol is a powerful tool for the construction of graphyne fragment backbones. For comparison, hexakis(arylethynyl)DBAs 9 c – g have also been prepared. The one‐photon absorption spectrum of tetrakis‐DBA 8 a bearing tert‐butyl groups revealed a remarkable bathochromic shift of the absorption cut‐off (λ_cutoff) compared with those of previously reported graphyne fragments due to extended π‐conjugation. Moreover, in the two‐photon absorption spectrum, 8 a showed a large cross‐section for a pure hydrocarbon because of the planar para‐phenylene‐ethynylene conjugation pathways. Hexakis(arylethynyl)‐DBAs 9 c – e and 9 g and tetrakis‐DBA 8 b bearing electron‐withdrawing groups aggregated in chloroform solutions. Comparison between the free energies of 9 e and 8 b bearing the same substituents revealed the more favorable association of the latter due to stronger π–π interactions between the extended π‐cores. Polarized optical microscopy observations, DSC, and XRD measurements showed that 8 b and 9 e with branched alkyl ester groups displayed columnar rectangular mesophases. By the time‐resolved microwave conductivity method, the columnar rectangular phase of 8 b was shown to exhibit a moderate charge‐carrier mobility of 0.12 cm² V^?1 s^?1. These results indicate that large graphyne fragments can serve as good organic semiconductors.     

Adsorption and photochemical behaviors of the novel cationic xanthene derivative on the clay surface

Novel tetra-cationic xanthene derivative (Flu) was synthesized. Its adsorption and photochemical behaviors on the clay surface were investigated. Fluorescence quantum yield (?_f) and fluorescence lifetime were 0.50 and 2.9 ns for Flu/clay complex. ?_f of Flu was enough high (>0.1) even at high density conditions (0.080 molecules nm⁻²). It is supposed that the strong interaction between clay and Flu by the ‘Size-Matching Effect’ realizes the highly emissive clay complexes at high density adsorption condition by a suppression of a molecular aggregation, which tends to decrease the photochemical activity.     

Probing the Charge Transfer in a Frustrated Lewis Pair by Resonance Raman Spectroscopy and DFT Calculations

A classical Lewis adduct derives from a covalent bond between a Lewis acid and a base. When the adduct formation is precluded by means of steric hindrance the association of the respective acid-base molecular system is defined as a frustrated Lewis pair (FLP). In this work, the archetypal FLP Mes₃P/B(C₆F₅)₃ was characterized for the first time by resonance Raman spectroscopy, and the results were supported by density functional theory (DFT) calculations. The charge transfer nature of the lowest energy electronic transition, from phosphine to borane, was confirmed by the selective enhancement of the Raman bands associated to the FLP chromophore at resonance condition. Herein, we demonstrate the use of resonance Raman spectroscopy as a distinguished technique to probe the weak interaction involved in FLP chemistry.     

Comparison of CO2 Reduction Performance with NH3 and H2O between Cu/TiO2 and Pd/TiO2

The aim of this study is to clarify the effect of doped metal type on CO₂ reduction characteristics of TiO₂ with NH₃ and H₂O. Cu and Pd have been selected as dopants for TiO₂. In addition, the impact of molar ratio of CO₂ to reductants NH₃ and H₂O has been investigated. A TiO₂ photocatalyst was prepared by a sol-gel and dip-coating process, and then doped with Cu or Pd fine particles by using the pulse arc plasma gun method. The prepared Cu/TiO₂ film and Pd/TiO₂ film were characterized by SEM, EPMA, TEM, STEM, EDX, EDS and EELS. This study also has investigated the performance of CO₂ reduction under the illumination condition of Xe lamp with or without ultraviolet (UV) light. As a result, it is revealed that the CO₂ reduction performance with Cu/TiO₂ under the illumination condition of Xe lamp with UV light is the highest when the molar ratio of CO₂/NH₃/H₂O = 1:1:1 while that without UV light is the highest when the molar ratio of CO₂/NH₃/H₂O = 1:0.5:0.5. It is revealed that the CO₂ reduction performance of Pd/TiO₂ is the highest for the molar ratio of CO₂/NH₃/H₂O = 1:1:1 no matter the used Xe lamp was with or without UV light. The molar quantity of CO per unit weight of photocatalyst for Cu/TiO₂ produced under the illumination condition of Xe lamp with UV light was 10.2 μmol/g, while that for Pd/TiO₂ was 5.5 μmol/g. Meanwhile, the molar quantity of CO per unit weight of photocatalyst for Cu/TiO₂ produced under the illumination condition of Xe lamp without UV light was 2.5 μmol/g, while that for Pd/TiO₂ was 3.5 μmol/g. This study has concluded that Cu/TiO₂ is superior to Pd/TiO₂ from the viewpoint of the molar quantity of CO per unit weight of photocatalyst as well as the quantum efficiency.     

Experimental demonstration of the induction synchrotron

We report an experimental demonstration of the induction synchrotron, the concept of which has been proposed as a future accelerator for the second generation of neutrino factory or hadron collider. The induction synchrotron supports a superbunch and a superbunch permits more charge to be accelerated while observing the constraints of the transverse space-charge limit. By using a newly developed induction acceleration system instead of radio-wave acceleration devices, a single proton bunch injected from the 500 MeV booster ring and captured by the barrier bucket created by the induction step voltages was accelerated to 6 GeV in the KEK proton synchrotron.