Preparation of Polycrystalline Antimonic Acid Films by Electrophoretic Deposition

Cubic antimonic acid (Sb₂O₅·nH₂O) films were successfully prepared on stainless steel and Si(100) substrates by electrophoretic deposition (EPD) using two types of sols. The sols were prepared by reacting an H₂O₂ aqueous solution with Sb(O-i-C₃H₇)₃ or metallic Sb powder. The resulting films were found to consist of fine particles of cubic Sb₂O₅·nH₂O single crystals with uniform particle sizes of 30 nm and 150 nm. The weight of the Sb₂O₅·nH₂O deposit on the anode Si(100) substrate by EPD increased linearly with the current density in the range of 0–0.67 mA cm^–2, when the sol pH was over 7. The proton conductivity of the polycrystalline Sb₂O₅·nH₂O discs, formed from the two types of sols, was evaluated by an ac impedance method at room temperature under controlled levels of relative humidity.     

Control of optical properties of gel-derived oxide coating films containing fine metal particles

Control of the optical properties of gel-derived oxide films containing fine metal particles is described. The duration of the aging of Si(OC₂H₅)₄-derived sols and the amount of water for hydrolyzing Si(OC₂H₅)₄ were found to greatly affect the size and the shape of Au particles formed in the silica matrix, and accordingly the optical absorption of the Au/SiO₂ composite films. Employing dielectric media with high refractive indices like TiO₂ was shown to shift the absorption peak of Au particles to longer wavelengths. Pd/TiO₂ and Pt/TiO₂ composite films showed absorption in the visible region.     

Purification of enzymes by high-speed gel filtration on TSK-GEL SW columns

The purification of enzymes was investigated by high-speed gel filtration on TSK-GEL G3000SWG columns packed with porous silica gel deactivated by chemically bonded hydrophilic compounds. Crude β-galactosidase from bacterial cells and commercial urease were purified ca. 15-fold in a single gel filtration. These enzymes were eluted within an hour from the column and the recoveries of enzymatic activity were almost 100% although the operation was carried out at room temperature (22°). Samples up to 100 mg could be applied to the column without loss of separation efficiency.     

Preparation and properties of aromatic polyamides from 5-t-butylisophthalic acid and various aromatic diamines

Aromatic polyamides (aramids) having pendant t-butyl group were synthesized by the direct polycondensation of 5-t-butylisophthalic acid with various aromatic diamines in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. The aramids having inherent viscosities of 0.6–2.4 dL/g were obtained in quantitative yields. These polymers were readily soluble in various solvents such as NMP,N,N-dimethylacetamide, dimethyl sulfoxide, and pyridine, and gave transparent, tough and flexible films by casting from the NMP solutions. The aramids had glass transition temperatures between 250 and 330°C, and started to lose weight around 350°C, with 10% weight loss being recorded at about 450°C in air.     

Distribution pattern of rare earth ions between water and montmorillonite and its relation to the sorbed species of the ions.

REE (rare earth element) distribution coefficients (Kd) between the aqueous phase and montmorillonite surface were obtained to investigate the relation between the REE distribution patterns and the species of REE sorbed on the solid-water interface. It was shown that the features in the REE patterns, such as the slope of the REE patterns, the tetrad effect, and the Y/Ho ratio, were closely related to the REE species at the montmorillonite-water interface. In a binary system (REE-montmorillonite) below pH 5, three features (a larger Kd value for a lighter REE, the absence of the tetrad effect, and the Y/Ho ratio being unchanged from its initial value) suggest that hydrated REE are directly sorbed as an outer-sphere complex at the montmorillonite-water interface. Above pH 5.5, the features in the REE patterns, the larger Kd value for heavier REE, the M-type tetrad effect, and the reduced Y/Ho ratio, showed the formation of an inner-sphere complex of REE with -OH group at the montmorillonite surface. In addition, the REE patterns in the presence of humic acid at pH 5.9 were also studied, where the REE patterns became flat, suggesting that the humate complex is dominant as both dissolved and sorbed species of REE in the ternary system. All of these results were consistent with the spectroscopic data (laser-induced fluorescence spectroscopy) showing the local structure of Eu(III) conducted in the same experimental system. The present results suggest that the features in the REE distribution patterns include information on the REE species at the solid-water interface.     

Preparation and properties of polyarylates from 5-t-butylisophthaloyl chloride and various bisphenols

Polyarylates containing a t-butyl pendant group were prepared from 5-t-butylisophthaloyl chloride and various bisphenols through the phase-transfer catalyzed two-phase polycondensation. The polyarylates having inherent viscosities up to 3.1 dL/g were obtained quantitatively. They were readily soluble in various solvents such as chloroform, m-cresol, and pyridine. Coloreless, transparent, and flexible films could be cast from the chloroform solutions of the polymers. The polyarylates had glass transition temperatures between 210 and 320°C, and did not lose weight below 350°C, with 10% weight loss being recorded at 395–450°C in air.     

Chiral recognition of amino acids and dipeptides by a water-soluble zinc porphyrin

A chiral water-soluble zinc porphyrin was optically resolved on a chiral HPLC column, and the binding of chiral amino acids and peptides to each of the enantiomers was examined spectrophotometrically in basic aqueous solution. The binding data apparently indicated that the zinc porphyrin has chiral selectivity for amino acids and dipeptides. This was reasonably explained in terms of the triple cooperation of coordination, Coulomb, and steric interactions of the chiral amino carboxylates with the porphyrin. A compensatory relationship among the thermodynamic parameters for chiral recognition was also shown.     

Palladium-catalyzed cycloheptatriene formation by [3+2+2] cocyclization of 2-substituted allylic alcohols and alkynes

Cycloheptatrienes were obtained by the reaction of 2-substituted allylic alcohols with alkynes in the presence of catalytic amounts of palladium complexes and p-toluenesulfonic acid.     

Structural analysis of amylose tris(3,5-dimethylphenylcarbamate) by NMR relevant to its chiral recognition mechanism in HPLC

The structural analysis of amylose tris(3,5-dimethylphenylcarbamate) (ADMPC) was performed by NMR spectroscopy using a sample with a lower degree of polymerization in order to understand the chiral recognition mechanism when it was used as a chiral stationary phase (CSP) in high-performance liquid chromatography (HPLC). ADMPC exhibited chiral discrimination for many enantiomers, including 1-(9-anthryl)-2,2,2-trifluoroethanol (1) and 1,1'-bi-2-naphthol (2) in both NMR and HPLC. A good agreement was observed between the HPLC and NMR results when chloroform was employed as the common solvent. The structure of ADMPC in solution was investigated by NMR using the 2D NOESY technique coupled with computer modeling, and a left-handed 4/3 helical structure was obtained as the most probable one. The binding geometry between ADMPC and the enantiomers of 1 was also investigated by (1)H NMR titration. On the basis of these results combined with molecular modeling, a rational model to explain the chiral discrimination mechanism of 1 on ADMPC was proposed.     

Insulating tubular BN sheathing on semiconducting nanowires

An effective method was developed for generation of insulating tubular boron nitride (BN)-sheathed nanostructures. ZnS nanowires and multilayered Si-SiO2 nanowires were successfully sheathed with insulating tubular BN-forming nanocables. Both the semiconductor nanowire cores and the BN sheaths are crystalline with well-uniform morphologies.