Dynamic covalent approach to [2]- and [3]roxtanes by utilizing a reversible thiol-disulfide interchange reaction

A dynamic covalent approach to disulfide-containing [2]- and [3]rotaxanes is described. Symmetrical dumbbell-shaped compounds with two secondary ammonium centers and a central located disulfide bond were synthesized as components of rotaxanes. The rotaxanes were synthesized from the dumbbell-shaped compounds and dibenzo-[24]crown-8 (DB24C8) with catalysis by benzenethiol. The yields of isolated rotaxanes reached about 90 % under optimized conditions. A kinetic study on the reaction forming [2]rotaxane 2 a and [3]rotaxane 3 a suggested a plausible reaction mechanism comprising several steps, including 1) initiation, 2) [2]rotaxane formation, and 3) [3]rotaxane formation. The whole reaction was found to be reversible in the presence of thiols, and thermodynamic control over product distribution was thus possible by varying the temperature, solvent, initial ratio of substrates, and concentration. The steric bulk of the end-capping groups had almost no influence on rotaxane yields, but the structure of the thiol was crucial for reaction rates. Amines and phosphines were also effective as catalysts. The structural characterization of the rotaxanes included an X-ray crystallographic study on [3]rotaxane 3 a.     

Ruthenium-catalyzed arylation of 2-alkenylpyridines with aryl bromides: alternative E,Z-selectivity to Mizoroki-Heck reaction

Regio- and stereoselective arylation of 2-alkenylpyridines with aryl bromides is catalyzed by specific Ru(II)-phosphine complexes affording beta-arylated (Z)-2-alkenylpyridines, in which the aryl moiety is introduced cis to the pyridyl group. This geometrical selectivity is in sharp contrast to the Mizoroki-Heck reaction. [reaction: see text]     

Radical-initiated homo- and copolymerization of cyanomethyl methacrylate

The kinetics of cyanomethyl methacrylate (CyMA) homopolymerization was investigated in acetonitrile with azobisisobutyronitrile as initiator. The rate of polymerization R_p was expressed by R_p = k[AIBN]^0.49[CyMA]^1.2 and the overall activation energy was calculated as 72.3 kJ/mol. Kinetic constants for CyMA polymerization were obtained as follows: k_p/k = 0.10 L^1/2s^?1/2; 2fk_d = 1.57 × 10^?5s^?. The relative reactivity ratios of CyMA(M₂) copolymerization with styrene (r₁ = 0.15, r₂ = 0.29) and methyl methacrylate (r₁ = 0.43, r₂ = 0.75) in acetonitrile were obtained. Applying the Q-e scheme (in styrene copolymerization) led to Q = 1.64 and e = 0.98. The glass transition temperature T_g of poly(CyMA) was observed to be 91°C by thermomechanical analysis. Thermogravimetry of poly(CyMA) showed a 10% weight loss at 265°C in air.     

Asymmetric selective polymerization of racemic methacrylates with the cyclohexylmagnesium bromide-(−)-sparteine system

Asymmetric selective (or stereoelective) polymerization of various racemic methacrylates with cyclohexylmagnesium bromide (c-HexMgBr)-(-)sparteine (1/1.2) catalyst was studied in toluene at ?78°C. The methacrylates of α-ethylbenzyl (EBMA), α-isopropylbenzyl (i-PBMA), α-tert-butylbenzyl (t-BBMA), sec-butyl (s-BuMA), 1-methylallyl (1-MAMA), 2,3-epoxypropyl (2,3-EPMA), 2-phenylpropyl (2-PPMA), and menthyl (MentMA) alcohols were used as racemic monomers. In the polymerization of EBMA and i-PBMA (S) enantiomers were consumed preferentially and the optical purity of initially polymerized i-PBMA was as high as 97%. Optically pure (R) monomers were recovered at about 60% conversion for i-PBMA and 80% for EBMA. In t-BBMA, however, the (R) monomer was consumed preferentially over the (S) isomer. In the polymerization of s-BuMA and 1-MAMA (S) monomers were consumed in excess and the optical purity of the polymers formed in the early stage was about 30%. In 2,3-EPMA and 2-PPMA, which have asymmetric centers at the β position from the ester oxygen, (R) antipodes were more reactive. MentMA did not polymerize at ?78°C. Enantiomer selectivity ratios r_S and r_R were determined in the polymerization of EBMA, i-PBMA, and 1-MAMA. All polymers except poly(t-BBMA) were highly isotactic, but the tacticity of poly(t-BBMA) could not be estimated. Circular dichroism spectra of optically active polymers of α-substituted benzyl esters were measured.     

1H-NMR Relaxation of Water Molecules in the Aqueous Microcrystalline Cellulose Suspension Systems and Their Viscosity

An intensive study for aqueous microcrystalline cellulose (MCC) suspensions was carried out in view of the relationship between a viscosity and a 1H spin-spin relaxation time (T2) of water. An investigation was carried out for four suspension systems with the different particle size distributions. The proton mole ratio () of bound water against MCC particles and T2 of bound water (T2,b) were evaluated from the T2 values obtained by Carr-Purcell- Meiboom-Gill (C.P.M.G) method and those by solid echo method, respectively. As a result of these analyses, the T2,b value for the aqueous MCC suspension was evaluated as 5 × 10–3 s and it was found that the system having a larger tended to show a higher viscosity. By relating the above results to the observation of the suspensions by an optical microscope, it was concluded that a network formed by MCC particles plays an important role in generating a high viscosity of MCC suspension, and that an averaged mobility of water molecules is sensitively affected by the network structure.     

Flux decline behaviors in dead-end microfiltration of activated sludge and its supernatant

The properties of dead-end microfiltration were explored under constant pressure using two types of activated sludge controlled under the condition of different air flow rates. The activated sludge cultured at the air flow rate of 0.15 L min⁻¹ (the anaerobic condition) exhibited a significant flux decline compared with the case of the air flow rate of 2.33 L min⁻¹ (the aerobic condition). It was found from the results of microfiltration of the supernatant separated by centrifugation that the constituents in the supernatant caused a major cake resistance in microfiltration of the activated sludge. The average specific filtration resistance for filtration of the activated sludge was closely consistent with that for filtration of the supernatant at low pressure (49 kPa). However, the cake resistance of the microbial floc in microfiltration of the activated sludge became substantial with increasing filtration pressure because of high compressibility of the microbial floc. Moreover, the foulant and the fouling mechanism in microfiltration of the supernatant were evaluated from both microfiltration test of the supernatant and microfiltration test of the filtrate collected thereby. As a result, the effects of the pore size and material of the microfiltration membrane on the flux decline behaviors in dead-end microfiltration were reasonably elucidated.     

Medicinal foodstuffs. XXVII. Saponin constituents of gotu kola (2): structures of new ursane- and oleanane-type triterpene oligoglycosides, centellasaponins B, C, and D, from Centella asiatica cultivated in Sri Lanka

Ursane- and oleanane-type triterpene oligoglycosides, centellasaponins B, C, and D, were isolated from the aerial parts of Centella asiatica (L.) Urban cultivated in Sri Lanka together with madecassoside, asiaticoside, asiaticoside B, and sceffoleoside A. The chemical structures of centellasaponins B, C, and D were determined on the basis of chemical and physicochemical evidence to be madecassic acid 28-O-beta-D-glucopyranosyl(1-->6)-beta-D-glucopyranoside, madasiatic acid 28-O-alpha-L-rhamnopyranosyl(1-->4)-beta-D-glucopyranosyl(1-->6)-beta-D-glucopyranoside, and 3beta,6beta,23-trihydroxyolean-12-en-28-oic acid 28-O-alpha-L-rhamnopyranosyl(1-->4)-beta-D-glucopyranosyl(1-->6)-beta-D-glucopyranoside, respectively.     

New photoswitching unit for magnetic interaction: diarylethene with 2,5-bis(arylethynyl)-3-thienyl group

Photoswitching of the intramolecular magnetic interaction was demonstrated using diarylethenes with 2,5-bis(arylethynyl)-4-methyl-3-thienyl side group. Two nitroxide radicals were placed at each end of the 2,5-bis(arylethynyl)-4-methyl-3-thienyl group. Three kinds of aryl groups, 2,5-thienylene, p-phenylene, and m-phenylene groups, were used in the arylethynyl moiety. The diarylethene photoswitching units have an extended pi-conjugated chain on one side of the diarylethene. The photochromic reactivity was dependent on the arylethynyl group. Diarylethenes with m-phenylene group showed an efficient photochromic reactivity. Along with the photochromic reaction the diarylethenes showed photoswitching of an ESR spectrum originating from the change in the magnetic interaction between two unpaired electrons. The open-ring isomer showed stronger exchange interaction than the photogenerated closed-ring isomer. The magnetic interaction between two radicals via the pi-conjugated chain was altered by photocyclization due to the change of the hybrid orbital at the 2-position of the thiophene ring from sp(2) to sp(3).     

Convergent synthesis of polycyclic ethers via the intramolecular allylation of alpha-acetoxy ethers and subsequent ring-closing metathesis

The Lewis acid mediated reaction of alpha-acetoxy ethers 15-22 gave the corresponding cyclized products 23, 25, 27, 29, 31, 32, 34, and 36 in good yields with high stereoselectivities. Those cyclized products were subjected to ring-closing metathesis to afford the polycyclic ethers 38-42, 44, and 45 in good yields. The usefulness of the present methodology was demonstrated by the convergent synthesis of the CDEF ring system of brevetoxin B (1) and the CDEFG ring system of gambierol (2).     

Preparation and properties of aromatic polyamides and copolyamides from phenylindanedicarboxylic acid and aromatic diamines

Aromatic polyamides (aramids) having inherent viscosities of 0.5–1.10 dL/g were prepared by the direct polycondensation of 1,1,3-trimethyl-3-(4-carboxyphenyl)indane-5-carboxylic acid with various aromatic diamines using triphenyl phosphite and pyridine as the condensing agents. Copolyamides were also prepared by a similar procedure from a mixture of the phenylindane diacid, terephthalic acid, and p-phenylenediamine. Almost all of the aramids were soluble in a variety of solvents such as N-methyl-2-pyrrolidone, pyridine, and m-cresol, and afforded transparent and tough films by the solution casting. These aramids and copolyamides had glass transition temperatures in the range of 290–355°C, and started to lose weight at 340°C in air.