Heterodinuclear Lanthanoid‐Containing Polyoxometalates: Stepwise Synthesis and Single‐Molecule Magnet Behavior

Polyoxometalates (POMs) with heterodinuclear lanthanoid cores, TBA₈H₄[{Ln(μ₂‐OH)₂Ln′}(γ‐SiW₁₀O₃₆)₂] ( LnLn′ ; Ln=Gd, Dy; Ln′=Eu, Yb, Lu; TBA=tetra‐n‐butylammonium), were successfully synthesized through the stepwise incorporation of two types of lanthanoid cations into the vacant sites of lacunary [γ‐SiW₁₀O₃₆]^8? units without the use of templating cations. The incorporation of a Ln³⁺ ion into the vacant site between two [γ‐SiW₁₀O₃₆]^8? units afforded mononuclear Ln³⁺‐containing sandwich‐type POMs with vacant sites ( Ln1 ; TBA₈H₅[{Ln(H₂O)₄}(γ‐SiW₁₀O₃₆)₂]; Ln=Dy, Gd, La). The vacant sites in Ln1 were surrounded by coordinating W? O and Ln? O oxygen atoms. On the addition of one equivalent of [Ln′(acac)₃] to solutions of Dy1 or Gd1 in 1,2‐dichloroethane (DCE), heterodinuclear lanthanoid cores with bis(μ₂‐OH) bridging ligands, [Dy(μ₂‐OH)₂Ln′]⁴⁺, were selectively synthesized ( LnLn′ ; Ln=Dy, Gd; Ln′=Eu, Yb, Lu). On the other hand, La1 , which contained the largest lanthanoid cation, could not accommodate a second Ln′³⁺ ion. DyLn′ showed single‐molecule magnet behavior and their energy barriers for magnetization reversal (ΔE/k_B) could be manipulated by adjusting the coordination geometry and anisotropy of the Dy³⁺ ion by tuning the adjacent Ln′³⁺ ion in the heterodinuclear [Dy(μ₂‐OH)₂Ln′]⁴⁺ cores. The energy barriers increased in the order: DyLu (ΔE/k_B=48 K)< DyYb (53 K)< DyDy (66 K)< DyEu (73 K), with an increase in the ionic radii of Ln′³⁺; DyEu showed the highest energy barrier.     

Efficient approach to allylated quinolines via palladium-catalyzed cyclization–allylation of 1-azido-2-(2-propynyl) benzenes with allyl methyl carbonate

The palladium-catalyzed cyclization–allylation reaction of ortho-azido propynylbenzenes 1 and allyl methyl carbonate 2d gives the corresponding allylated quinolines in moderate to good yields. The reaction of 1-azido-2-(2-propynyl)benzene 1a proceeds smoothly with 10 mol % Pd(PPh₃)₄ and 5 equiv K₃PO₄ or NaOAc in DMF at 100 °C to afford 3,4-diallylquinoline 3a in 69% yield in the case of R² = H and 3-allylquinoline 4 in 67% yield in the case of R² ≠ H.     

Investigation of the center intensity of first- and second-order Laguerre-Gaussian beams with linear and circular polarization

The vectorial Debye integral shows that tightly focused Laguerre-Gaussian (LG) beams have a residual intensity at the focal point for linear polarization, for a topological charge of m=1 and 2. We measured the shapes of linearly and circularly polarized LG beams and found that a central intensity appeared at m=1 and 2 for linear and right-handed circular polarization, however, it is completely canceled for left-handed circular polarization. In general, when the orbital angular momentum of the LG beam is parallel to the spin angular momentum of the photons, zero intensity is always achieved at the focus.     

Super strong nuclear force caused by migrating K? mesons - Revival of the Heitler-London-Heisenberg scheme in kaonic nuclear clusters

We have studied the structure of K⁻pp comprehensively by solving this threebody system in a variational method, starting from the Ansatz that the Λ(1405) resonance (≡Λ^*) is a K⁻p bound state. The structure of K⁻pp reveals a molecular feature, namely, the K⁻ in Λ^* as an “atomic center” plays a key role in producing strong covalent bonding with the other proton. We point out that strongly bound $\bar{K}$ nuclear systems are formed by “super strong” nuclear force due to migrating real bosonic particles $\bar{K}$ a la Heitler-London-Heisenberg, whereas the normal nuclear force is caused by mediating virtual mesons. We have shown that the elementary process, p + p → K⁺ + Λ^* + p, which occurs in a short impact parameter and with a large momentum transfer, leads to unusually large self-trapping of Λ^* by the involved proton, since the Λ^*-p system exists as a compact doorway state propagating to K⁻pp.     

Synthesis of α‐Dawson‐Type Silicotungstate [α‐Si2W18O62]8− and Protonation and Deprotonation Inside the Aperture through Intramolecular Hydrogen Bonds

The design of structurally well‐defined anionic molecular metal–oxygen clusters, polyoxometalates (POMs), leads to inorganic receptors with unique and tunable properties. Herein, an α‐Dawson‐type silicotungstate, TBA₈[α‐Si₂W₁₈O₆₂] ? 3 H₂O ( II ) that possesses a ?8 charge was successfully synthesized by dimerization of a trivacant lacunary α‐Keggin‐type silicotungstate TBA₄H₆[α‐SiW₉O₃₄] ? 2 H₂O ( I ) in an organic solvent. POM II could be reversibly protonated (in the presence of acid) and deprotonated (in the presence of base) inside the aperture by means of intramolecular hydrogen bonds with retention of the POM structure. In contrast, the aperture of phosphorus‐centered POM TBA₆[α‐P₂W₁₈O₆₂]?H₂O ( III ) was not protonated inside the aperture. The density functional theory (DFT) calculations revealed that the basicities and charges of internal μ₃‐oxygen atoms were increased by changing the central heteroatoms from P⁵⁺ to Si⁴⁺, thereby supporting the protonation of II . Additionally, II showed much higher catalytic performance for the Knoevenagel condensation of ethyl cyanoacetate with benzaldehyde than I and III .     

Total Synthesis of the Antibiotic Kendomycin: A Macrocyclization Using the Tsuji–Trost Etherification

A highly stereocontrolled, convergent total synthesis of kendomycin [(?)‐TAN2162], an ansa‐macrocyclic antibiotic, is reported. The key of the strategy is an unprecedented Tsuji–Trost macrocyclic etherification, followed by a transannular Claisen rearrangement to construct the 18‐membered carbocyclic framework. The oxa‐six‐ and five‐membered rings were also stereoselectively constructed respectively by a cascade oxidative cyclization at an unfunctionalized benzylic position and using a one‐pot epoxidation/5‐exo‐tet epoxide opening.     

Static light scattering from poly(ethylene oxide) in methanol

Static light scattering measurements were performed on dilute solutions of monodisperse poly(ethylene oxide) (PEO) in methanol at 25°C. PEOs of five different molecular weights ranging from nominal M_w = 8.6 × 10⁴ to 9.13 × 10⁵ were used. Linear Zimm plots were obtained for all the PEO samples: no downturn was observed at small angles, indicating that no large aggregates of PEO molecules exist in the solution. From the plots, values of the weight-average molecular weight, M_w, the radius gyration, R_G, and the second virial coefficient, A₂, were successfully determined for respective PEOs. Observed relationship between R_G and M_w indicates that methanol is certainly a good solvent for the polymer. © 1996 John Wiley & Sons, Inc.     

Speciation of Arsenic Compounds in the Urine of Rats Orally Exposed to Dimethylarsinic Acid Ion Chromatography with ICP–MS as an Element-Selective Detector

A combined ion chromatography (IC) with inductively coupled plasma mass spectrometry (ICP—MS) system as an element-selective detector has been used for the determination of arsenic compounds. Seven arsenic compounds were separated by cation-exchange chromatography. Subsequently, the separated arsenic compounds were directly introduced into the ICP—MS and were detected at m/z =75. Detection limits for the seven arsenic compounds ranged from 0.8 to 3.8 μg As/l. The IC–ICP–MS system was applied to the determination of arsenic compounds in the urine of dimethylarsinic acid (DMAA)-exposed rats. DMAA was the most abundant arsenic compound detected. Arsenous acid, monomethylarsonic acid and trimethylarsine oxide were also detected.     

VLS Growth of ITO Whiskers Prepared by the Electron Shower Method

Indium tin oxide (ITO) whiskers were grown by VLS (vapour-liquid-solid) mechanism, using the electron shower method. The whiskers were grown above 200 °C, and the deposition rate was above 0.6 nm/s. The electron shower controlled the size of the whiskers, and the size was 30 nm in diameter and 600 nm in length. The whiskers grew along the substrate at t < 300 s, but grew in a direction perpendicular to the substrate at t > 300 s. When the ITO whiskers grown along the substrate were used as NO₂ gas sensor, the sensitivity was 340, and about 300 times higher than those of the whiskers grown in a direction perpendicular to the substrate and plate-like ITO crystallites.     

Synthesis of cycl[3.2.2]azine and benzo[g]cycl[3.2.2]azine derivatives by use of the [2 + 8] cycloaddition reaction of indolizines and dimethyl acetylenedicarboxylate

The reaction of 1-ethoxycarbonylmethylpyridinium bromides 5a-k with nitro ketene dithioacetal, 1,1-bis-(methylthio)-2-nitroethylene ( 2 ), in the presence of triethylamine in ethanol gave the desired ethyl 2-methyl-thioindolizine-3-carboxylates 3a-k in good yields, along with ethyl 2-methylthio-1-nitroindolizine-3-carboxyl-ates 4a-d . Deesterification of 3 using sodium hydroxide in methanol followed by treatment with polyphosphoric acid gave the corresponding 2-methylthioindolizines 5a-d in good yields. The desulfurization of 5 with Raney-nickel in ethanol occurs smoothly to give the 1,2,3-unsubstituted indolizines 6a-c (a , parent indolizine; b , 8-methylindolzine; c , 6,8-dimethylindolizine). Similarly, pyrrolo[2,1-a]isoquinoline ( 19 ) was also synthesized. These indolizine and pyrrolo[1,2-a]isoquinoline derivatives were allowed to react with dimethyl acetylene to give the corresponding cycl[3.2.2]azine and benzo[g]cycl[3.2.2]azine derivatives in good results.