Reaction of enaminones with carbon disulfide: Synthesis of heterocycles using enamino dithiocarboxylates

Reaction of various types of enaminones, which are prepared by the condensation of 1,3-dicarbonyl compounds with aromatic amines, with carbon disulfide in the presence of sodium hydroxide as the base in dimethyl sulfoxide to give the corresponding enamino dithiocarboxylates, 1,3-thiazines and trithiones. Enamino dithiocarboxylates are cyclized under refluxing in diphenyl ether to give the fused quinoline derivatives. The reaction of 6-arylamino-1,3-dimethyluracils with excess carbon disulfide in the presence of sodium hydroxide and subsequent methylation with dimethyl sulfate gave directly the corresponding 1,3-dimethyl-5-methylthiopyrimido[4,5-b]quinoline-2,4(1H,3H)-diones.     

Adiabatic microcalorimeters for heat capacity measurement at low temperature

Technical problems in the design and construction of small sample adiabatic calorimeters are pointed out and solutions to them discussed. Two calorimeters constructed on the design principle are described with illustrative examples of data obtained with them. Hard and soft wares for fully automatic operation of the two calorimeters are described in some detail.     

Elongation and contraction of molecular springs. Synthesis, structures, and properties of bridged [7]thiaheterohelicenes

A series of bridged [7]thiaheterohelicenes 3a-c and 4 with a variety of helical pitches have been prepared from racemic and optical pure 2,13-bis(hydroxymethyl)dithieno[3,2-e:3',2'-e']benzo[1,2-b:4,3-b']bis[1]benzothiophene (1) in order to investigate the helical structures in solution. Recrystallizations of (PM)-3a, (PM)-3b, (PM)-3c, and (P)-4 from hexane-dichloromethane gave crystals suitable for X-ray crystallography, while recrystallization of (PM)-4 with benzene gave an inclusion complex with a stoichiometry of (PM-4)(4).(C(6)H(6)). X-ray analyses of (PM)-3a-c, (PM-4)(4).(C(6)H(6)), and (P)-4 indicate that the dihedral angles between terminal thiophene rings of the helical framework significantly vary from 22 degrees for 4 to 59 degrees for 3c. This represents as increase of 37 degrees or 168%. Although the (13)C NMR and UV absorption spectra of bridged helicenes 3a-c and unbridged helicene 5 are essentially the same, the molar rotation of 5 is very large compared with those of 3a-c and 4. A red shift (15 nm) in the circular dichroism (CD) spectrum is observed for 4, suggesting that this compound is more planar than 3a-c in solution. In the series of [7]thiaheterohelicenes studied, the minimum helical pitch is 2.70 A for 4.     

Formation of Supramolecular Polymers Constructed by Cyclodextrins with Cinnamamide

-Cyclodextrin having cinnamamide at 6- or 3-positions (6-CiNH--CD, 3-CiNH--CD) and -cyclodextrin with cinnamamide on 6-position (6-CiNH--CD) have been prepared. Supramolecular structures were formed in the solid state or aqueous solutions and characterized by measurements of NMR and vapor pressure osmometry (VPO). The results indicate that 6-CiNH--CD formed insoluble supramolecular polymers in the solid state, while 6-CiNH--CD and 3-CiNH--CD formed supramolecular complexes in aqueous solutions. 6-CiNH--CD was found to form a dimer in an aqueous solution. 3-CiNH--CD formed intermolecular complexes to give supramolecular polymers. The differences of the position of guest part on cyclodextrins caused to give a variety of supramolecular structures in aqueous solutions.     

Simultaneous determination of sulfamethoxazole and trimethoprim in human plasma by capillary zone electrophoresis

A capillary electrophoretic method for the simultaneous determination of sulfamethoxazole and trimethoprim in plasma was developed. Sulfamethoxazole and trimethoprim extracted from human plasma with ethyl acetate were analyzed at 20 kV and 25 degrees C using 15 mm phosphate buffer (pH 6.2) as the electrolyte. The detection was by UV at 220 nm. The run time was 8.0 min and the limit of quantification was 10.00 microg/mL for sulfamethoxazole and 2.00 microg/mL for trimethoprim. The recovery was >99% for both compounds. This method enabled the detection of sulfamethoxazole and trimethoprim in plasma of patients after oral ingestion of their combined formulation. The present simple and rapid method is applicable to drug monitoring in immunocompromised patients who are taking the combined formulation of these compounds for the treatment or prophylaxis of Pneumocystis carinii pneumonia.     

Synthesis of pyrimidine derivatives using N-bis(methylthio)methylenecyanamide

N-Bis(methylthio)methylenecyanamide ( 1 ) was allowed to react with active methylene compounds (methyl cyanoacetate, dimethyl malonate, ethyl acetoacetate, ethyl phenylacetate) in the presence of potassium carbonate or potassium hydroxide in dimethyl sulfoxide followed by the treatment using appropriate a base or an acid to give the corresponding 6-methylthiouracil derivatives in 15–80% yields. These uracil derivatives are found to be useful intermediates for the synthesis of 6-aminouracils and fused pyrimidine derivatives.     

Ferrocene-containing polymers. I. Radiation-induced polymerization of ferrocenylmethyl methacrylate

γ-Ray-induced polymerizations of ferrocenylmethyl methacrylate (FMMA) in crystalline and amorphous states were investigated with kinetical and ESR methods. In the crystalline state the polymerization of FMMA proceeded slowly and gave low-molecular-weight polymers, whereas in the amorphous state it proceeded rapidly and gave polymers of much higher molecular weight. Molecular weight distributions of these polymers were binodal. The temperature dependence and the dose-rate dependence of the polymerization rates were different between the two states. Wide-line nuclear magnetic resonance (NMR) spectra of the amorphous monomer suggested that the polymerization proceeded in a supercooled state. Electron spin resonance (ESR) spectra of γ-irradiated FMMA and 1,1′-ferrocenyl-di(methyl methacrylate) showed that ferrocene radicals and methacrylic radicals were formed simultaneously at low temperature; with increasing temperature the former radicals disappeared, whereas the latter changed into growing chain radicals. The yields of radicals were relatively low; this means that ferrocene groups in the monomers behave as a radiation energy absorber.     

First synthesis of 1,9-dideoxyforskolin from ptychantin A

1,9-Dideoxyforskolin 2 has been synthesized starting from ptychantin A 3.     

Palladium-catalyzed aminoallylation of activated olefins with allylic halides and phthalimide

The three-component aminoallylation reaction of the activated olefins 2 with the phthalimide 1a and allyl chloride proceeded very smoothly in the presence of Pd(2)dba(3).CHCl(3) (5 mol %)/P(4-FC(6)H(4))(3) (40 mol %) and Cs(2)CO(3) (3 equiv against 2) in dichloromethane at room temperature to give the corresponding aminoallylated products, N-pent-4-enylphthalimides 3, in 58-99% yields. The reaction of oxazolidinone 1b also proceeded very smoothly to give N-(2,2-dicyano-1-phenylpent-4-enyl)oxazolidinone in a quantitative yield; however, the Tsuji-Trost-type allylation products 4 were obtained in the case of dibenzylamine, N-tosylaniline, and pyrrolidin-2-one. Further, 2 underwent cycloaddition with N-tosylvinylaziridine 9a in the presence of Pd(2)dba(3).CHCl(3) (5 mol %)/P(4-FC(6)H(4))(3) (40 mol %) in THF at room temperature, giving the corresponding pyrrolidines 11 in 69-99% yields.