Modification of poly(vinyl chloride). XIII. Crosslinking of poly(vinyl chloride) with dithiols and properties of the crosslinked products

PVC was crosslinked by immersing PVC–dithiol blends in ethylenediamine at 30°C. Properties of the products depended on the chain length and chemical structure of the crosslinkage and on the molecular weight of the polymer chain between crosslinks M_c. Crosslinking by the agent of soft structure and long molecular chain resulted in high tensile strength at break and impact strength and low brittle temperature. The use of the crosslinking agent of short molecular chain gave high yield strength, Young's modulus, and heat distortion temperature. The relation of M_c and the chemical structure of the crosslinks to the properties of the crosslinked rigid polymer was discussed in regard to the crosslinking effect and plasticizing effect.     

Preparation and characterization of nanoaggregates of poly(ethylene oxide)-b-polymethacrylate and poly-L-lysine

Poly(ethylene oxide)-b-polymethacrylate (PEO-b-PMA), one of the double-hydrophilic block copolymers, has proved to the form nanoaggregates with poly-L-lysine (PLS). This was confirmed by turbidimetry, zeta-potential measurements, and dynamic light scattering. The nanoaggregate formation is induced by electrostatic charge neutralization of the PMA block with PLS. The properties of the aggregates are affected by PLS concentration as well PEO-b-PMA concentration. The aggregates have potential applications in biomedical science.     

Regioselective oxygenative tetraamination of [60]fullerene. Fullerene-mediated reduction of molecular oxygen by amine via ground state single electron transfer in dimethyl sulfoxide

The reaction of [60]fullerene with a variety of a secondary aliphatic amines in 20% v/v dimethyl sulfoxide in chlorobenzene under an atmospheric pressure of molecular oxygen allows regioselective introduction of four amino groups and one epoxide group around one pentagon of the fullerene molecule in good to high yield. This new synthesis of tetraaminofullerene expoxide can be carried out with a simple procedure on a multigram scale at room temperature and affords a variety of functionalized fullerene derivatives. Near-infrared analysis of a mixture of [60]fullerene and piperidine in a deaerated dimethyl sulfoxide/chlorobenzene mixture indicated equilibrium formation of [60]fullerene radical anion (C60*-) that persists at least for 2 weeks at room temperature but reacts immediately with molecular oxygen to give the tetraaminofullerene expoxide. The Benesi-Hildebrand analysis of the concentration dependency of the near-infrared absorption indicated that a [C60*- piperidine*+] radical ion pair is formed with an equivalent constant of K = 0.62 +/- 0.02 M(-1) at 25 degrees C. This and other lines of evidence suggest that the oxygenative amination reaction involves C60-mediated reduction of molecular oxygen by the amine.     

Kinetic mechanism of methanol decomposition on Ni(111) surface: a theoretical study

The decomposition of methanol on the Ni(111) surface has been studied with the pseudopotential method of density functional theory-generalized gradient approximation (DFT-GGA) and with the repeated slab models. The adsorption energies of possible species and the activation energy barriers of the possible elementary reactions involved are obtained in the present work. The major reaction path on Ni surfaces involves the O-H bond breaking in CH(3)OH and the further decomposition of the resulting methoxy species to CO and H via stepwise hydrogen abstractions from CH(3)O. The abstraction of hydrogen from methoxy itself is the rate-limiting step. We also confirm that the C-O and C-H bond-breaking paths, which lead to the formation of surface methyl and hydroxyl and hydroxymethyl and atom hydrogen, respectively, have higher energy barriers. Therefore, the final products are the adsorbed CO and H atom.     

Determination of the 13C NMR chemical shifts in an a2u type iron(III) porphyrin cation radical

The 13C NMR chemical shifts of all the carbons in an a2u type iron(III) porphyrin radical cation, [Fe(TPP)Cl]+, have been determined for the first time by the titration method as well as by the chemical shift correlation; they are 2230, 1050, and -1910 ppm for the alpha-pyrrole, beta-pyrrole, and meso carbon atoms, respectively.     

Novel efficient preparative method for phthalocyanines from phthalimides and phthalic anhydride with HMDS

A convenient synthesis of peripherally substituted or unsubstituted phthalocyanines having a variety of metals is described. Phthalocyanines can be obtained by heating phthalimides or phthalic anhydride with metal salts, hexamethyldisilazane, a catalytic amount of p-TsOH, and DMF at 150 degrees C.     

A synthesis of chiral 1,1,3-trisubstituted 1,2,3,4-tetrahydro-beta-carbolines by the Pictet-Spengler reaction of tryptophan and ketones: conversion of (1R,3S)-diastereomers into their (1S,3S)-counterparts by scission of the C(1)-N(2) bond

The Pictet-Spengler cyclization of the imines (3) prepared by the condensation of L-tryptophan methyl ester (1) and aryl methyl ketones (2), using titanium(IV) isopropoxide as an iminating reagent, quantitatively proceeded, when treated with trifluoroacetic acid (TFA) or formic acid, to provide two diastereomers, that is (1S,3S)-1-aryl-3-isopropoxycarbonyl-1-methyl-1,2,3,4-tetrahydro-beta-carbolines (4) and their (1R,3S)-diastereomers (5), of which the diastereomer ratios varied from 1 to 5 depending on the reaction conditions. The (1R,3S)-diastereomers (5) are thermodynamically more stable than their (1S,3S)-congeners (4), as shown by equilibration experiments in TFA. The conversion of 4 to 5 (also 5 to 4) should occur under acidic conditions by cleavage of the C(1)-N(2) bond with complete retention of configuration at the C-3 chiral center. The low diastereo-selectivity observed in the Pictet-Spengler reaction of 1 and 2 is concluded to be a stereochemical outcome under conditions of kinetic control (lower temperature, shorter reaction time), while the high diastereo selectivity with preferential formation of the more stable isomer (5) is the result of thermodynamically controlled experiments (higher temperature, longer reaction time).     

Novel and efficient method for esterification, amidation between carboxylic acids and equimolar amounts of alcohols, and amines utilizing Me2NSO2Cl and N,N-dimethylamines; its application to the synthesis of coumaperine, a natural chemopreventive dieneamide

Various carboxylic esters or amides were prepared in good to excellent yield between carboxylic acids and equimolar amounts of alcohols or amines under very mild conditions (0-45°C; within 3 h) using dimethylsulfamoyl chloride (Me₂NSO₂Cl; 1) combined with N,N-dimethylamines (Me₂NR: 2a; R=Me, 2b; R=Bu). The choice of the sulfamoyl chloride and the amine is crucial for the reaction; that is, sterically uncrowded amines accelerated the present esterification and amidation. This agent had some advantages over methanesulfonyl chloride (3)/amines as for the atom-economy, avoidance of side reactions, and had very high chemoselectivity toward the carboxyl group vs the hydroxyl group; the experiment was performed by the addition of 1 to the mixture of carboxylic acids and alcohols. Application of this method to the synthesis of coumaperine, a chemopreventive natural product, was performed using the present amidation as a key step.