Uniaxial alignment of nematic liquid crystals filling vacant spaces in surface-treated nanofibre nonwoven

ABSTRACT

Nematic liquid crystals (NLCs) absorbed in a nonwoven of surface-treated silica nanofibres (SiO₂-NFs) orient the director along the nonwoven thickness direction if the NLCs prefer homeotropic anchoring onto the fibre surface. The nonwoven has vacant spaces with the dimensions of 0.3 and 0.6 μm in the thickness and cross directions, respectively, bordered with SiO₂-NFs with 93 nm in diameter. The SiO₂-NF surface was treated with a silane-coupling agent to induce the homeotropic anchoring of NLC mesogens onto the surface. The nematic director is arranged radially from the fibres although it is more severely constrained by the proximity between fibre surfaces along the thickness direction. Consequently, the NLCs can align along the nonwoven thickness direction involving ?1/2 wedge disclinations on both sides of the fibres.     

Studies on nepalese crude drugs. XXVIII. Chemical constituents of Bhote Khair, the underground parts of Eskemukerjea megacarpum HARA

From the underground parts of Eskemukerjea megacarpum HARA, two new stilbenes (14, 15) were isolated, together with a known coumarin, 5,7-dihydroxycoumarin (1), a tyramine derivative, trans-feruloyltyramine (2), two pyrogallol derivatives, gallic acid (3) and beta-glucogallin (4), four flavonoids, trifolin (5), hyperin (6), myricetin 3-O-beta-D-galactopyranoside (7), and myricitrin (8), five stilbenes, resveratorol (9), astringenin (10), piceid (11) astringin (12), and resveratorol 3-O-beta-D-(6-O-galloyl)glucopyranoside (13), a flavan-3-ol, (-)-epigallocatechin 3-O-gallate (16), two proanthocyanidins, catechin-(4alpha-->8)-epigallocatechin 3-O-gallate (17) and epicatechin 3-O-gallate-(4beta-->8)-epigallocatechin 3-O-gallate (18), and an anthocyanin, idaein (19). Compounds 14 and 15 were identified as (E)-3,5,3',4'-tetrahydroxystilbene 3-O-beta-D-(6-O-galloyl)glucopyranoside and (E)-3,5,4'-trihydroxystilbene 3-O-beta-D-(6-O-galloyl)glucopyranoside, respectively, based on spectral and chemical data.     

Synthesis of diblock copolymers with cellulose derivatives. 3. Cellulose derivatives carrying a single pyrene group at the reducing-end and fluorescent studies of their self-assembly systems in aqueous NaOH solutions

Novel cellobiose and cellulose (DP _n =ca. 30) derivatives, N-(1-pyrenebutyloyl)-4-O-(β-d-glucopyranosyl)-β-d-glucopyranosylamine (6), N-(15-(1-pyrenebutyloylamino)-pentadecanoyl)-4-O-(β-d-glucopyranosyl)-β-d-glucopyranosylamine (7), N-(1-pyrenebutyloyl)-β-cellulosylamine (13), N-(15-(1-pyrenebutyloylamino)-pentadecanoyl)-β-cellulosylamine (14) carrying a pyrene group as a single fluorescent probe at the reducing end, were prepared in order to investigate their self-assembly systems in solutions. The relative intensity of the excimer emission at ca. 480 nm due to dimerized pyrenes (intensity I _E) to the monomer emission at ca. 380 nm due to isolated pyrene (intensity I _M), i.e., I _E/I _M, was monitored in various solutions. In water/dimethyl sulfoxide (DMSO) mixed solvent (0–98%, v/v), the ratio I _E/I _M remained low (0.04) for compound 6 over the range of water concentrations, indicating that pyrenes at C-1 position of compound 6 were diffused. On the other hand, the ratio I _E/I _M increased (0.04–4.96) for compound 7 with the increase in water concentration, indicating that pyrenes at C-1 position were associated. In aqueous NaOH solutions (4.4–17.5%, w/w), compound 14 showed a large increase in the ratio I _E/I _M (0.84–8.14) with the increase in NaOH concentration, compared to compound 13 (0.06–0.41). It was found that the association of hydrophobic groups at the reducing-end of cellulose could be controlled by the hydrophilic–hydrophobic balance of compounds and the solvent polarity.     

Effect of Solvent Diols and Ligands on the Properties of Sol-Gel Alumina-Silicas

Amorphous alumina-silicas were prepared from a tetra-alkoxysilane and anhydrous aluminum trichloride or an aluminum alkoxide by a sol-gel process using 2-methyl-2,4-pentanediol, pinacol, 1,2-propanediol, 2,3-butanediol or ethylene glycol as the solvent or complexing agent, and the effect of diols and alkoxy groups on the physical and chemical properties of the alumina-silicas was examined. When the diol or the alkoxy group was bulky, the alumina-silicas had relatively larger micropores, a larger pore volume and higher surface areas. In the conversion of methanol catalyzed by the alumina-silicas, the bulkier diols and alkoxides gave catalysts that produced dimethyl ether in higher yield and hydrocarbons in lower yield. Thus, when ethylene glycol was used as the diol, the best catalyst for the production of hydrocarbons, especially the production of olefins such as ethylene, propylene and butene, was obtained. Furthermore, in comparison with alumina-silica prepared by a traditional kneading process, it was found that the sol-gel alumina-silica could efficiently convert methanol to dimethyl ether and hydrocarbons, but the material prepared by kneading had a very low conversion of methanol to other compounds.     

Rapid determination of nitroimidazole residues in honey by liquid chromatography/tandem mass spectrometry

We developed a rapid and efficient means of determining residues of four nitroimidazoles-i.e., dimetridazole, ipronidazole, metronidazole, and ronidazole-and three hydrophilic metabolites- i.e., 2-hydroxymethyl-1-methyl-5-nitroimidazole, 1 -methyl-2-(2'-hydroxyisopropyl)-5-nitroimidazole, and 1-(2-hydroxyethyl)-2-hydroxymethyl-nitroimidazole--in honey. We applied a QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) procedure improved to suit a nitroimidazole analysis, which is fast (approximately 30 min) and uses less organic solvent. The procedure involves initial single-phase extraction of 5 g of honey with acetonitrile containing 1% acetic acid, followed by liquid-liquid partitioning involving the addition of 5 g sodium chloride, 1.5 g trisodium citrate dihydrate, and 4 g magnesium sulfate. Moreover, matrix from honey was reduced by an SPE method with an alumina-N cartridge. The samples were analyzed using LC/MS/MS. Chromatographic separation of these nitroimidazoles and metabolites was performed in the gradient mode on a pentafluorophenylpropyl-bonded silica column (150x2.0 mm, 3 pm particle size) at 40 degrees C. The mobile phase consisted of a 0.01% acetic acid solution and acetonitrile, and the flow rate was 0.2 mL/min. The method was validated using honey spiked with these nitroimidazoles from 0.1 to 0.5 microg/kg. The overall recovery of the seven nitroimidazoles ranged from 76.1 to 98.5%; intra- and interassay CV values were <9.5 and <14.2%, respectively. The LOQ ranged from 0.1 to 0.5 microg/kg. LC/MS/MS coupled with the QuEChERS method showed good potential as a method for determining nitroimidazole residues in honey.     

Epitaxial thin films of ATiO(3-x)H(x) (A = Ba, Sr, Ca) with metallic conductivity

Epitaxial thin films of titanium perovskite oxyhydride ATiO(3-x)H(x) (A = Ba, Sr, Ca) were prepared by CaH(2) reduction of epitaxial ATiO(3) thin films deposited on a (LaAlO(3))(0.3)(SrAl(0.5)Ta(0.5)O(3))(0.7) substrate. Secondary ion mass spectroscopy detected a substantial amount and uniform distribution of hydride within the film. SrTiO(3)/LSAT thin film hydridized at 530 °C for 1 day had hydride concentration of 4.0 × 10(21) atoms/cm(3) (i.e., SrTiO(2.75)H(0.25)). The electric resistivity of all the ATiO(3-x)H(x) films exhibited metallic (positive) temperature dependence, as opposed to negative as in BaTiO(3-x)H(x) powder, revealing that ATiO(3-x)H(x) are intrinsically metallic, with high conductivity of 10(2)-10(4) S/cm. Treatment with D(2) gas results in hydride/deuteride exchange of the films; these films should be valuable in further studies on hydride diffusion kinetics. Combined with the materials' inherent high electronic conductivity, new mixed electron/hydride ion conductors may also be possible.     

Synthesis of methylcellulose model copolymers with heterogeneous distribution and their solution properties

In order to elucidate the characteristic features of commercial methylcellulose precisely, O-methylcellulose model copolymers consisting of 2,3,6-tri-O-methylanhydroglucose unit (236MeAGU) and 2-O-methylanhydroglucose unit (2MeAGU) with various composition ratios were synthesized via cationic ring-opening copolymerization of the corresponding glucose orthoester derivatives, subsequent removal of pivaloyl and allyl groups, and methylation. The structure of the obtained copolymers was confirmed by ¹H-, ¹³C-NMR, and FT-IR. Temperature-dependent turbidity measurement verified their thermoresponsive behavior in aqueous solution. The lower critical solution temperature was tuned from 63 to 45 °C above 47 mol-% 236MeAGU content. The hydrophobicity along the cellulose chain was dominant to determine their physical properties. However, the aqueous properties of the MC model copolymers were strongly affected by the slight difference of the composition ratio. The present method would provide further details of the structure–property relationship of O-methylcellulose.     

Transient kinetic studies of protein hydrolyses by endo- and exo-proteases on a 27 MHz quartz-crystal microbalance

We have compared endo- and exo-type protease reactions and characterized the enzymatic reaction mechanisms by determining all kinetic parameters (k(on), k(off), k(cat), K(d) = k(off)/k(on), and K(m) = (k(off) + k(cat))/k(on)) by following the mass change of the formation and the decay of the enzyme-substrate (ES) complex (k(on) and k(off)), and the formation of the product (k(cat)) on a 27 MHz quartz-crystal microbalance in aqueous solutions. The K(m) value was nearly equal to the K(d) value for the endo-type protease (subtilisin and alpha-chymotrypsin); however, in the case of exo-type protease (carboxypeptidase P), the K(m) value was quite different from the K(d) value, due to k(cat) > k(off).