Specific oxidation of C-14 oxygenated 4(20),11-taxadienes by microbial transformation

Three C-14 oxygenated taxanes, 2α,5α,10β,14β-tetraacetoxytaxa-4(20),11-diene (1), 2α,5α,10β-triacetoxy-14β-(2-methylbutyryloxy)taxa-4(20),11-diene (2), and yunanaxane (3), major products of callus cultures of Taxus spp., were regio- and stereoselectively hydroxylated at the 7β position by a fungus, Absidia coerulea IFO 4011. Intriguingly, when 1 was co-administered with β-cyclodextrin and incubated with the fungus cell cultures, three other compounds 5α,9α,10β,13α-tetraacetoxytaxa-4(20),11-dien-14β-ol (7), 5α,9α,10β,13α-tetraacetoxytaxa-4(20),11-dien-1β-ol (8) and 5α,9α,10β,13α-tetraacetoxy-11(15→1) abeotaxa-4(20),11-dien-15-ol (9) were obtained.     

Difference in spin crossover pathways among saddle-shaped six-coordinated iron(III) porphyrin complexes

The electronic states of a series of saddle-shaped porphyrin complexes [Fe(OMTPP)L(2)](+) and [Fe(TBTXP)L(2)](+) have been examined in solution by (1)H NMR, (13)C NMR, and EPR spectroscopy and by magnetic measurements. While [Fe(OMTPP)(DMAP)(2)](+) and [Fe(TBTXP)(DMAP)(2)](+) maintain the low-spin (S = (1)/(2)) state, [Fe(OMTPP)(THF)(2)](+) and [Fe(TBTXP)(THF)(2)](+) exhibit an essentially pure intermediate-spin (S = (3)/(2)) state over a wide range of temperatures. In contrast, the Py and 4-CNPy complexes of OMTPP and TBTXP exhibit a spin transition from S = (3)/(2) to S = (1)/(2) as the temperature was decreased from 300 to 200 K. Thus, the magnetic behavior of these complexes is similar to that of [Fe(OETPP)Py(2)](+) reported in our previous paper (Ikeue, T.; Ohgo, Y.; Yamaguchi, T.; Takahashi, M.; Takeda, M.; Nakamura, M. Angew. Chem., Int. Ed. 2001, 40, 2617-2620) in the context that all these complexes exhibit a novel spin crossover phenomenon in solution. Close examination of the NMR and EPR data of [Fe(OMTPP)L(2)](+) and [Fe(TBTXP)L(2)](+) (L = Py, 4-CNPy) revealed, however, that these complexes adopt the less common (d(xz), d(yz))(4)(d(xy))(1) electron configuration at low temperature in contrast to [Fe(OETPP)Py(2)](+) which shows the common (d(xy))(2)(d(xz), d(yz))(3) electron configuration. These observations have been attributed to the flexible nature of the OMTPP and TBTXP cores as compared with that of OETPP; the relatively flexible OMTPP and TBTXP cores can ruffle the porphyrin ring and adopt the (d(xz), d(yz))(4)(d(xy))(1) electron configuration at low temperature. Therefore, this study reveals that the rigidity of porphyrin cores is an important factor in determining the spin crossover pathways.     

Effects of added metal ions on the interaction between polyvinylpyrrolidone and azo dyes carrying hydroxyl groups

The extent of binding of chrome violet, which is a monoazo dye and involves two hydroxyl groups in o and o′ positions to azo group, by polyvinylpyrrolidone is markedly enhanced in the presence of Co²⁺ ion. The amount of binding in the presence of 1 × 10^?4 mol/L of Co²⁺ ion increases by a factor of about 10 compared to that in the absence of the metal ion. Ni²⁺ and Zn²⁺ ions do not perceptively influence the binding affinity of the dye. Cu²⁺ ion, in contrast, suppresses the binding. To investigate further the action of added metal ions, a cobalt–complex dye was prepared and its binding property for the polymer was compared to that of chrome violet in the presence of metal ions. Some possible mechanisms for the enhancement of chrome violet binding by the addition of Co²⁺ ion are described.     

Fine Pore-Structure Engineering by Ligand Conformational Control of Naphthalene Diimide-Based Semiconducting Porous Coordination Polymers for Efficient Chemiresistive Gas Sensing

Exploring new porous coordination polymers (PCPs) that have tunable structure and conductivity is attractive but remains challenging. Herein, fine pore structure engineering by ligand conformation control of naphthalene diimide (NDI)-based semiconducting PCPs with π stacking-dependent conductivity tunability is achieved. The π stacking distances and ligand conformation in these isoreticular PCPs were modulated by employing metal centers with different coordination geometries. As a result, three conjugated PCPs (Co−pyNDI, Ni−pyNDI, and Zn−pyNDI) with varying pore structure and conductivity were obtained. Their crystal structures were determined by three-dimensional electron diffraction. The through-space charge transfer and tunable pore structure in these PCPs result in modulated selectivity and sensitivity in gas sensing. Zn−pyNDI can serve as a room-temperature operable chemiresistive sensor selective to acetone.     

Structure determination and magnetic studies of triazole chelated Co(II) coordination polymers

Two cobalt(II) halide complexes with 1,2,4-triazole as a ligand were synthesized. Their structures were determined by extended x-ray absorption fine structure (EXAFS) and powder x-ray diffraction (XRD). Both complexes [Co(Htrz)Cl₂]_n ( 1 ) and {[Co(Htrz)₂(trz)]BF₄}_n ( 2 ) form one-dimensional polymeric chain and the distances of Co⋯Co are 3.3521(2) Å and 3.8629(2) Å, respectively. The Htrz and Cl⁻ are bridging ligands to connect two Co(II) ions in 1 , and the local environment of Co site is in a distorted octahedron with {CoN₂Cl₄} core. In complex 2 , two Htrz and one trz are bridging ligands to connect two Co(II) ions, and the local geometry of Co is in a pseudo octahedron with {CoN₆} core. The analysis of Co L_II,III-edge XAS indicates that the Co(II) of both complexes are at high spin state with t_2g⁵e_g² configuration and the crystal field strength (10Dq) is about 1.2 eV. The broken-symmetry DFT calculations indicate that antiferromagnetic coupling state of Co⋯Co is the most stable state in both complexes; and the coupling constants of 1 and 2 are −0.32 cm⁻¹ and −3.70 cm⁻¹, respectively. Based on the distances of Co⋯Co and coupling constants, such antiferromagnetic interaction is achieved through triazole ligands.     

Liquid scintillation radioassay for multiple radionuclide mixtures by the most probable value theory

Multiple radionuclide mixtures which have similar scintillation pulse height distributions can be accurately radioassayed by the most probable value theory. This liquid scintillation technique is based on the construction of more observation equations than the number of nuclides to be analyzed. The technique has been applied to³H–¹⁴C–¹²⁵I and³H–¹⁴C–⁵¹Cr mixture samples, and found to be very practicable with the aid of computerized data processing for mixture samples having a wide range (ca. 10 times) of activity ratios.     

Immobilization of ultra-thin layer of monoclonal antibody on glass surface

When preparing an affinity column and a biosensor, it is desirable to immobilize a unimolecular layer of pure protein on a matrix. In this work, we tried to immobilize a monoclonal antibody on a surface of a glass test-tube as a model, to confirm the stability of this ultra-thin layer by an enzyme immunoassay, and to estimate the thickness of the layer on a slide glass by Fourier transform infrared reflection spectrometry. A new test-tube was washed and dried. The tube was filled with 5% 3-aminopropyltriethoxysilane. The 3-aminopropylsilylated surface was treated with glutaraldehyde and 5.6.10(-2) mg/ml solution of a normal mouse monoclonal antibody. The Schiff base between glutaraldehyde and the antibody was further reduced with 7.9.10(-3)% NaBH4. The tube was washed with 0.05% Tween 20 to block non-specific binding. The antibody immobilized on the surface was measured by an enzyme immunoassay based on a reaction of anti-mouse immunoglobulin G labelled with alkaline phosphatase, with which p-nitrophenol was produced from p-nitrophenylphosphate as a substrate. Meanwhile, various amounts of the antibody were immobilized on slide glasses in the same manner. The antibody on each surface was measured by Fourier transform infrared reflection spectrometry. The antibody immobilized under the final conditions was detectable by the enzyme immunoassay, and stable at 4 degrees C for ten days. The antibody on the slide glass was a unimolecular layer, as judged from the Fourier transform infrared spectra referred to -CONH- band semiquantitatively. Thus, we found the optimal conditions for immobilizing an ultra-thin layer of the monoclonal antibody on the glass surface.(ABSTRACT TRUNCATED AT 250 WORDS)     

Stereoselective adduct formation of α-acylcamphorato-copper(II) chelates with some chiral Lewis bases

The formation constants of the mono-adducts of α-acylcamphorato-copper(II) chelates such as (+)-Cu(facam)₂, (?)-Cu(facam)₂, (+)-Cu(hfbc)₂ and (?)-Cu(hfbc)₂ with some chiral Lewis bases were determined spectrophotometrically in benzene. In order to compare the adduct formation constants obtained with the (+)- and (?)-forms, some pairs of chiral Lewis bases such as 1-amino-2-propanol [(R)(?), (S)(+)], 1-(α-naphthyl)ethylamine [(R)(+), (S)(?)], α-phenyl ethylamine [(R)(+), (S)(?)] and also quinine and quinidine were examined as neutral ligands. Although not very pronounced, the effects of combinations obtained for (+)- or (?)-Cu(II) chelates and (+)- or (?)-ligands indicate that formation constants obtained by the formation of adducts with the ligands having different directions of the optical rotation seems to be superior to those with the same direction.     

Near-IR Luminescent YbIII Coordination Polymers Composed of Pyrene Derivatives for Thermostable Oxygen Sensors

Oxygen-sensitive and near-infrared (NIR) luminescent Yb^III coordination polymers incorporating ligands based on pyrene derivatives were synthesized: Yb^III–TBAPy and Yb^III–TIAPy (TBAPy: 1,3,6,8-tetrakis(p-benzoate)pyrene; TIAPy: 1,3,6,8-tetrakis(3,5-isophthalic acid)pyrene). The coordination structures of these materials have been characterized by means of electrospray ionization mass spectrometry, X-ray diffraction analysis, and thermogravimetric analysis. Moreover, the porous structure of Yb^III–TIAPy has been evaluated by measuring its N₂ adsorption isotherm. The NIR luminescence properties of Yb^III–TBAPy and Yb^III–TIAPy have been examined by acquiring emission spectra and determining emission lifetimes under air or argon and in vacuo. Yb^III–TIAPy exhibited high thermal stability (with a decomposition temperature of 400 °C), intense luminescence (with an emission quantum yield under argon of 6.6 %), and effective oxygen-sensing characteristics. These results suggest that NIR luminescent Yb^III coordination polymers prepared using pyrene derivatives could have applications in novel thermo-stable oxygen sensors.