Measurement of non-DLVO force on a silicon substrate coated with ammonium poly(acrylic acid) using scanning probe microscopy

The repulsive force originating from steric hindrance of polymers in aqueous solvent was investigated using scanning probe microscopy (SPM). The contact angle (CA) of ammonium poly(acrylic acid) (PAA) solution on the Si surface was measured to estimate the state of the Si substrate. Results of CA measurement show that the Si surface was fully covered with PAA at 0.1 mass% in aqueous solution. The interaction force between the Si tip and the wafer was estimated using the SPM force curve mode. The force curve measured in the ion-exchanged purified water showed the typical relation predicted by Derjaguin-Landau-Verway-Overbeek (DLVO) theory. However, the force curve shape in the 0.1 mass% PAA solution was significantly different. Only a repulsive force was observed at less than about 4 nm of separation distance between the Si wafer and cantilever tip. This distance originated from the steric repulsions of PAA adsorbed onto the Si wafer and cantilever tip.     

Fluorophotometric Determination of Hydrogen Peroxide with Fluorescin in the Presence of Cobalt (II) and Reaction Against Other Reactive Oxygen Species

A fluorophotometric method for the determination of hydrogen peroxide (H₂O₂) using fluorescin was developed. This method was based on the oxidative reaction of fluorescin, a colorless, non-fluorescent lactoid fluorescein, by H₂O₂ to give highly fluorescein fluorescence emission. In the determination of H₂O₂, the calibration curve exhibited linearity over the H₂O₂ concentration range of 1.5–310 ng mL⁻¹ at an emission wavelength of 525 nm with an excitation of 500 nm and with relative standard deviations (n = 6) of 2.51%, 2.48%, and 1.31% for 3.1 ng mL⁻¹, 30.8 ng mL⁻¹, and for 308 ng mL⁻¹ of H₂O₂, respectively. The detection limit for H₂O₂ was 1.9 ng mL⁻¹ six blank determinations was performed (ρ = 6). This proposed method was applied to detection of other reactive oxygen species and nitrogen species (ROS/RNS) such as singlet oxygen (¹O₂), hydroxyl radical (^•OH), peroxynitrite (ONOO⁻) etc., and it was possible to detect them with a high sensitivity. In addition, this proposed method was applied to the recovery tests of H₂O₂ in calf serum, human saliva, rain water, and wheat noodles; the results were satisfactory.     

Rapid controlled hydrolytic degradation of poly(l-lactic acid) by blending with poly(aspartic acid-co-l-lactide)

Although poly(lactic acid) is known as a biodegradable polymer, its hydrolytic degradation is extremely slow, taking years in water and in the human body. In this study the effects of blending oligomeric poly(aspartic acid-co-lactide) (PALs) on the hydrolytic degradation of poly(l-lactic acid) (PLLA) were studied in detail. It was found that the addition of PAL did not accelerate the hydrolysis of the PLLA in air (25 °C, 60% relative humidity), but significantly accelerated it in a phosphate buffer solution. The degradation rate becomes higher for the blends containing PAL with higher molar ratios of lactide to aspartic acid units, [LA]/[Asp], when PLLA/PAL blends prepared with different PALs are compared at the same PAL concentration. TEM results, in which the distribution of PALs with higher [LA]/[Asp] occurs at a smaller scale in blends, imply that higher miscibility of the PAL with PLLA results in higher contact area between the components, thereby accelerating the degradation efficiently.     

Stereoselective synthesis of (Z)-alkene-containing proline dipeptide mimetics

In peptides and proteins, the peptide bond between an amino acid and proline exists as an equilibrium mixture of the cis-imide and trans-imide due to the low energy barrier in their interconversion. This feature greatly influences the structure and function of the proline-containing peptides and proteins. Therefore, restricting the amide bond with an (E)- or (Z)-alkene should provide a promising method for elucidating the structure-activity relationships of the peptide and the proteins. In this report, the regio- and stereoselective synthesis of cis-alanylproline (Ala-Pro) type (Z)-alkene dipeptide mimetic is described. The key steps of this synthesis are to introduce a C3 unit onto a gamma-phosphoryloxy-alpha,beta-unsaturated-delta-lactam with an organocopper-mediated anti-S(N)2' reaction and subsequently construct a five-membered proline-like cyclic structure with an intramolecular Suzuki coupling reaction. Hydrolysis of the amide bond in the resulting bicyclic lactam yields the desired cis-Ala-Pro type (Z)-alkene dipeptide isostere. The presented synthetic methodology should be applicable to the general syntheses of other cis-aminoacylproline type (Z)-alkene dipeptide mimetics.     

光刻技术:发展路径及未来趋势

光刻技术在半导体器件大规模生产中发挥重要作用.今天,多数先进半导体生产都已经应用ArF准分子激光浸润光刻技术.双重图像曝光和侧壁图像转移技术使ArF准分子激光浸润光刻技术延伸到32纳米半节距(HP)器件的制造成为可能.为了制造更小尺寸的器件,必须开发新的制造工艺.极端紫外线光刻是制造22纳米半节距甚至更小尺寸半导体器件的先进下一代光刻技术解决方案.另外,其他技术解决方案,如纳米压印光刻技术和无掩模直描光刻技术等也被考虑用于制造更小节点尺寸的器件,但是目前这些方案仅仅处在研发阶段,而且在现阶段就已经呈现出在大规模生产中的诸多困难.本文从材料的角度对光刻技术进行一个整体描述,并对光刻技术未来趋势进行讨论.     

Changes in diffusion tensor imaging (DTI) eigenvalues of skeletal muscle due to hybrid exercise training

Several studies have proposed the cell membrane as the main water diffusion restricting factor in the skeletal muscle cell. We sought to establish whether a particular form of exercise training (which is likely to affect only intracellular components) could affect water diffusion. The purpose of this study is to characterise prospectively the changes in diffusion tensor imaging (DTI) eigenvalues of thigh muscle resulting from hybrid training (HYBT) in patients with non-alcoholic fatty liver disease (NAFLD). Twenty-one NAFLD patients underwent HYBT for 30 minutes per day, twice a week for 6 months. Patients were scanned using DTI of the thigh pre- and post-HYBT. Fractional anisotropy (FA), apparent diffusion coefficient (ADC), the three eigenvalues lambda 1 (λ1), λ2, λ3, and the maximal cross sectional area (CSA) were measured in bilateral thigh muscles: knee flexors (biceps femoris (BF), semitendinosus (ST), semimembranous (SM)) and knee extensors (medial vastus (MV), intermediate vastus (IV), lateral vastus (LV), and rectus femoris (RF)), and compared pre- and post-HYBT by paired t-test. Muscle strength of extensors (P < 0.01), but not flexors, increased significantly post-HYBT. For FA, ADC and eigenvalues, the overall picture was of increase. Some (P < 0.05 in λ2 and P < 0.01 in λ1) eigenvalues of flexors and all (λ1-λ3) eigenvalues of extensors increased significantly (P < 0.01) post-HYBT. HYBT increased all 3 eigenvalues. We suggest this might be caused by enlargement of muscle intracellular space.     

Hybrid Mesoporous-Silica Materials Functionalized by Pt(II) Complexes: Correlation between the Spatial Distribution of the Active Center, Photoluminescence Emission, and Photocatalytic Activity

[Pt(tpy)Cl]Cl (tpy: terpyridine) was successfully anchored to a series of mesoporous-silica materials that were modified with (3-aminopropyl)triethoxysilane with the aim of developing new inorganic-organic hybrid photocatalysts. Herein, the relationship between the luminescence characteristics and photocatalytic activities of these materials is examined as a function of Pt loading to define the spatial distribution of the Pt complex in the mesoporous channel. At low Pt loading, the Pt complex is located as an isolated species and exhibits strong photoluminescence emission at room temperature owing to metal-to-ligand charge-transfer ((3) MLCT) transitions (at about 530?nm). Energy- and/or electron-transfer from (3) MLCT to O(2) generate potentially active oxygen species, which are capable of promoting the selective photooxidation of styrene derivatives. On the other hand, short Pt???Pt interactions are prominent at high loading and the metal-metal-to-ligand charge-transfer ((3) MMLCT) transition is at about 620?nm. Such Pt complexes, which are situated close to each other, efficiently catalyze H(2) -evolution reactions in aqueous media in the presence of a sacrificial electron donor (EDTA) under visible-light irradiation. This study also investigates the effect of nanoconfinement on anchored guest complexes by considering the differences between the pore dimensions and structures of mesoporous-silica materials.     

The role of chiral dopants in organic/inorganic hybrid materials containing chiral Schiff base Ni(II), Cu(II) and Zn(II) complexes

Chiral Schiff base complexes containing azo-groups, bis(N-R-1-cyclohexylethyl-4-phenyldiazenylsalicydenaminato) nickel(II), copper(II) and zinc(II) complexes, and without azo-groups, bis(N-R-1-cyclohexylethyl-3,5-dichlorosalicydenaminato) nickel(II), copper(II) and zinc(II) complexes, affording a distorted square planar trans-[MN₂O₂] coordination geometry were prepared. Organic/inorganic hybrid materials in polymethylmethacrylate (PMMA) spincoat films of the complexes (both the azobenzene (AZ) containing type and the latter complexes of the AZ separated type) were assembled for a comparison of polarized UV light induced molecular arrangement caused by the Weigert effect. Investigation of the parameters for the optical anisotropy of the metal complexes as well as AZ suggested that the degree of increasing optical anisotropy of the containing type was higher than that of the separated type based on π-π^∗ (of which a characteristic band appeared around 380 nm) and n-π^∗ bands of polarized absorption electronic spectra. In the AZ containing type, the rigid nickel(II) or zinc(II) complexes easily increase the optical anisotropy compared to the flexible copper(II) complexes. In the AZ separated type, interestingly, enhancement of some CD bands suggests the role of chiral dopants of some complexes without azo-groups for AZ.     

Application of photoactive yellow protein as a photoresponsive module for controlling hemolytic activity of staphylococcal α-hemolysin

A chimeric protein (N-PYP-Hla), consisting of staphylococcal pore-forming toxin α-hemolysin (Hla) and photoactive yellow protein (PYP), exhibited photoresponsive hemolytic activities, where visible light irradiation gave rise to retardation of hemolysis at 25 °C.     

Label-free detection of C-reactive protein using reflectometric interference spectroscopy-based sensing system

Reflectometric interference spectroscopy (RIfS) is a label-free, time-resolved technique, and suitable for detecting antibody–antigen interaction. This work describes a continuous flow biosensor for C-reactive protein (CRP), involving an effective immobilization method of a monoclonal antibody against CRP (anti-CRP) to achieve highly sensitive RIfS-based detection of CRP. The silicon nitride-coated silicon chip (SiN chip) for the RIfS sensing was first treated with trimethylsilylchloride (TMS), followed by UV-light irradiation to in situ generation of homogeneous silanols on the surface. Following amination by 3-aminopropyltriethoxysilane, carboxymethyldextran (CMD) was grafted, and subsequently, protein A was immobilized to create the oriented anti-CRP surface. The immobilization process of protein A and anti-CRP was monitored with the RIfS system by consecutive injections of an amine coupling reagent, protein A and anti-CRP, respectively, to confirm the progress of each step in real time. The sensitivity was enhanced when all of the processes were adopted, suggesting that the oriented immobilization of anti-CRP via protein A that was coupled with the grafted CMD on the aminated surface of TMS-treated SiN chip. The feasibility of the present sensing system was demonstrated on the detection of CRP, where the silicon-based inexpensive chips and the simple optical setup were employed. It can be applied to other target molecules in various fields of life science as a substitute of surface plasmon resonance-based expensive sensors.