Sterol composition of a cultured marine dinoflagellate,Heterocapsa circularisquama

The composition of sterols was determined in a cultured marine dinoflagellate Heterocapsa circularisquama. Ten kinds of the sterol in H. circularisquama were identified by capillary gas chromatography-mass spectrometry. The major sterol was a 4-methyl sterol, 4alpha,23,24-trimethyl-5alpha-cholest-22E-en-3beta-ol (dinosterol) which is the common sterol in many dinoflagellates.     

Water‐disintegrative and biodegradable blends containing poly(L‐lactic acid) and poly(butylene adipate‐co‐terephthalate)

In this study, novel biodegradable materials were successfully generated, which have excellent mechanical properties in air during usage and storage, but whose structure easily disintegrates when immersed in water. The materials were prepared by melt blending poly(L ‐lactic acid) (PLLA) and poly(butylene adipate‐co‐terephthalate) (PBAT) with a small amount of oligomeric poly(aspartic acid‐co‐lactide) (PAL) as a degradation accelerator. The degradation behavior of the blends was investigated by immersing the blend films in phosphate‐buffered saline (pH = 7.3) at 40 °C. It was shown that the PAL content and composition significantly affected morphology, mechanical properties, and hydrolysis rate of the blends. It was observed that the blends containing PAL with higher molar ratios of L ‐lactyl [LA]/[Asp] had smaller PBAT domain size, showing better mechanical properties when compared with those containing PAL with lower molar ratios of [LA]/[Asp]. The degradation rates of both PLLA and PBAT components in the ternary blends simultaneously became higher for the blends containing PAL with higher molar ratios of [LA]/[Asp]. It was confirmed that the PLLA component and its decomposed materials efficiently catalyze the hydrolytic degradation of the PBAT component, but by contrast that the PBAT component and its decomposed materials do not catalyze the hydrolytic degradation of the PLLA component in the blends. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Anomalous thermochromic transition of poly(di‐n‐octylsilane)

The thermochromic behavior of poly(di‐n‐octylsilane) {[Si(C₈H₁₇)₂]_n; PDOS} was studied by ultraviolet (UV) absorption, differential scanning calorimetry, and X‐ray diffraction measurements. The structure of PDOS in the low‐temperature phase strongly depended on not only the temperature but also the rate of cooling, that is, the thermal history. Temperature‐dependent UV absorption spectra were highly dependent on thermal hysteresis. Cooled rapidly (10 K/min), PDOS showed two absorption peaks at 3.32 and 3.51 eV in low‐temperature‐ordered phases, whereas a single absorption peak at 3.32 eV became predominant with slow cooling (0.3 K/min). The appearance of the two peaks at low temperatures suggested that a mixture of different conformations was introduced by rapid cooling. A fiber diffraction pattern measured at 240 K after rapid cooling also showed evidence of the existence of novel conformation. A temperature‐dependent powder X‐ray diffraction pattern changed significantly between 270 and 280 K. Rapid cooling reduced the intensity of the X‐ray diffraction peak in this temperature region. This intensity change was explained by the conformational mixture in the polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 1085–1092, 2001     

Classification Performance of a Low Pressure Differential Mobility Analyzer for Nanometer-sized Particles

Size distribution measurements and classification tests by a low pressure differential mobility analyzer (LPDMA) for nanometer-sized silver particles and cesium iodide particles under low pressure conditions (123–300 Torr) were performed using a transmission electron microscope (TEM) and the tandem DMA technique. When the ratio of the sheath gas flow rate and the aerosol gas flow rate was set at 5 : 1, the targeted sizes calculated from the classification voltage applied to the LPDMA at 160 Torr are found to be in good correlation with the count mean Feret diameter obtained from the TEM observation of the particles collected after a classification ranging from 6 to 25 nm, although the targeted sizes set by the LPDMA were approximately 15% greater than the count mean Feret diameter measured by the TEM after classification. The geometric standard deviations of DMA-classified particles measured by TEM and those obtained from the tandem DMA method ranged from 1.08 to 1.17 and from 1.05 to 1.13, respectively. They were slightly greater than the ideal geometric standard deviations (1.05) of the particles classified with the LPDMA, which was calculated by neglecting the broadening effects due to Brownian diffusion. We experimentally demonstrated the validity of our LPDMA system for size measurements and classification of the nanometer-sized particles under low pressure conditions.     

TritonX-100 selective chemosensor based on β-cyclodextrin modified by anthracene derivative

β-Cyclodextrin (CD) modified by 2-(9-anthracenecarboxamido)phenyl group (Ant-CD) was synthesized and their complexation behavior was investigated by UV and fluorescence spectroscopy. Fluorescence intensity of Ant-CD was dramatically enhanced ca. 10-fold by the addition of TritonX-100 (TX-100) in water below the critical micelle concentration. Ant-CD also showed ca. 4-fold fluorescence increasing in the addition of analogous materials, n-octylbenzenesulfonate in water. These results indicate that Ant-CD can act as a highly sensitive and selective chemosensor for TX-100. Ant-CD and TX-100 formed a pseudorotaxane supramolecular complex. This result was supported by ¹H-¹H NOESY NMR measurement.     

Characterization of Ultra‐Thin Temperature‐Responsive Polymer Layer and Its Polymer Thickness Dependency on Cell Attachment/Detachment Properties

Ultra thin poly(N‐isopropylacrylamide) (PIPAAm) modified glass coverslips (PIAPAm‐CS) using electron beam irradiation exhibited a clear relationship between the polymer thickness and thermal cell adhesion/detachment behavior. The polymer thickness dependency and the characteristic of ultra thin PIPAAm layer, has been illustrated in terms of the molecular motion of the modified PIPAAm chains. PIPAAm‐CSs surfaces with various area‐polymer densities and thicknesses were characterized by AFM and protein adsorption assay. The newly obtained results gave a further insight into the illustration. Finally, the future application of intelligent surfaces was discussed for fabricating tissue and organ.

     

Coexistence properties of phase separation and CuPt-ordering in InGaAsP grown on GaAs substrates by organometallic vapor phase epitaxy

CuPt-ordering and phase separation were directly investigated in In_1-xGa_xAs_yP_1-y with a low arsenic content grown by organometallic vapor phase epitaxy on GaAs substrates. CuPt-ordering and phase separation in samples grown at the substrate temperatures of 630 and 690 °C were characterized by transmission electron diffraction and transmission electron microscopy. Although the immiscibility of InGaAsP was enhanced at the lower substrate temperature, the sample grown at 630 °C showed less phase separation than the 690 °C-grown sample. The degree of CuPt-ordering was significantly enhanced in the sample grown at 630 °C. The results demonstrated that the CuPt-ordering originating from surface reconstruction of P(2×4) suppressed the phase separation even in the miscibility gap. The detailed characterization of the phase separation clearly revealed a vertical composition modulation (VCM) in InGaAsP for the first time. The mechanism of the VCM formation is discussed based on the modulated-strain field on the surface.     

Photoreaction Cycle of Phoborhodopsin (Sensory Rhodopsin II) from Halobacterium salinarum Expressed in Escherichia coli

Phoborhodopsin (pR; also called sensory rhodopsin II, SRII) is a photoreceptor of negative phototaxis of halobacteria. The studies of photochemical properties of this pigment are not many because the amount of the pigment is small and the stability is low. Recently an expression system of phoborhodopsin from Halobacterium salinarum (called salinarum phoborhodopsin, spR; also HsSRII) in Escherichia coli and purification method has been developed (Mironova et al. [2005] FEBS Lett., 579, 3147–3151), which enables detailed studies on the photochemical properties of spR. In the present work, the photoreaction cycle of E. coli-expressed spR was studied by low-temperature spectroscopy and flash photolysis. Formations of K-, M-, O-like intermediates and P480 were reconfirmed as reported previously. New findings are as follows. (1) The K-like intermediate (P500) was a mixture of two photoproducts. (2) Formation of L-like intermediate (P482) was observed by low-temperature spectroscopy and flash photolysis at room temperature. (3) On long irradiation of spR at 20°C, formation of a new photoproduct P370 was observed and it decayed to the original spR in the dark with a decay half time of 190 min. Based on these results the similarities and dissimilarities between spR and ppR are discussed.     

A level set approach for computing discontinuous solutions of Hamilton-Jacobi equations

We introduce two types of finite difference methods to compute the L-solution and the proper viscosity solution recently proposed by the second author for semi-discontinuous solutions to a class of Hamilton-Jacobi equations. By regarding the graph of the solution as the zero level curve of a continuous function in one dimension higher, we can treat the corresponding level set equation using the viscosity theory introduced by Crandall and Lions. However, we need to pay special attention both analytically and numerically to prevent the zero level curve from overturning so that it can be interpreted as the graph of a function. We demonstrate our Lax-Friedrichs type numerical methods for computing the L-solution using its original level set formulation. In addition, we couple our numerical methods with a singular diffusive term which is essential to computing solutions to a more general class of HJ equations that includes conservation laws. With this singular viscosity, our numerical methods do not require the divergence structure of equations and do apply to more general equations developing shocks other than conservation laws. These numerical methods are generalized to higher order accuracy using weighted ENO local Lax-Friedrichs methods as developed recently by Jiang and Peng. We verify that our numerical solutions approximate the proper viscosity solutions obtained by the second author in a recent Hokkaido University preprint. Finally, since the solution of scalar conservation law equations can be constructed using existing numerical techniques, we use it to verify that our numerical solution approximates the entropy solution.

     

Spectrophotometric determination of uric acid based on fading of o-hydroxyhydroquinonephthalein-palladium(II)-hexadecyltrimethyl-ammonium complex.

A simple and highly sensitive spectrophotometric method for the determination of uric acid (UA) was established based on fading of the o-hydroxyhydroquinonephthalein-palladium(II)-hexadecyltrimethylammonium complex. In the determination of UA, Beer's law is obeyed in the range of 0.01-0.20 microg ml(-1), with an effective molar absorptivity at 635 nm, the relative standard deviation being 6.5 x 10(5) dm(3) mol(-1) cm(-1) and 1.5% (n = 5). This method is about 20-times more sensitive than the conventional methods. The method was successfully applied to the assay of UA in human urine.