Grafting of polymers with controlled molecular weight onto ultrafine silica surface

To graft polymers with controlled molecular weight and narrow molecular weight distribution, the grafting of polymers onto ultrafine silica surface by the termination of living polymer cation with amino groups introduced onto the surface was investigated. The introduction of amino or N-phenylamino groups onto the silica surface was achieved by the treatment of silica with γ-aminopropyltriethxysilane or N-phenyl-γ-aminopropyltrimethoxysilane. It was found that these amino groups on silica are readily reacted with living poly(isobutyl vinyl ether) (polyIBVE), which was generated with CF₃COOH/ZnCl₂ initiating system, and polyIBVE with controlled molecular weight and narrow molecular weight distribution is grafted onto the surface. By the termination of living poly(2-methyl-2-oxazoline), which was generated with methyl p-toluenesulfonate initiator, with amino groups on silica, polyMeOZO was also grafted onto the surface. The percentage of grafting of polymer onto the silica surface decreased with increasing molecular weight of the living polymer, because the steric hindrance of silica surface increases with increasing molecular weight of living polymer. Polymer-grafted silica gave a stable dispersion in a good solvent for grafted chains. © 1995 John Wiley & Sons, Inc.     

Molecular cluster batteries of nano-hybrid materials between Keggin POMs and SWNTs

Nano-hybrid materials of single-walled carbon nanotubes (SWNTs) and polyoxometalates (POMs) with three counter cations were prepared and used as cathode-active materials of molecular cluster batteries (MCBs). The charging/discharging performances and thus battery capacity of the MCBs with hybrid materials were significantly better than those of the microcrystal-POM MCBs.     

Structural Changes in Block Copolymer Solutions under Shear Flow as Determined by Non‐Equilibrium Molecular Dynamics

Summary: A non‐equilibrium molecular dynamics computer simulation on microsegregated solutions of symmetrical diblock copolymers is reported. As the polymer concentration increases, the system undergoes phase transitions in the following order: body centered cubic (BCC) micelles, hexagonal (HEX) cylinders, gyroid (GYR) bicontinuous networks and lamellae (L), which are the same morphology reported for block copolymer melts. Structural classification is based on the patterns of the anisotropic static structure factor and characteristic 3‐dimensional images. The systems in the BCC micellar (ρσ³ = 0.3) and HEX cylindrical (ρσ³ = 0.4) phases were then subjected to a steady planar shear flow. In weak shear flow, the segregated domains in both systems tend to rearrange into sliding parallel close‐packed layers with their normal in the direction of the shear gradient. At higher shear rates, both systems adopt a perpendicular lamellar structure with the normal along the neutral direction. A further increase in the shear rate results in a decrease in lamellar spacing without any further structural transitions. Two critical shear rate values that correspond to the demarcation of different structural behaviors were found.

Shear‐induced BCC‐LAM phase transition.     

Galloyl-oxypaeoniflorin, suffruticosides A, B, C, and D, five new antioxidative glycosides, and suffruticoside E, A paeonol glycoside, from Chinese moutan cortex.

Five new antioxidative glycosides named galloyl-oxypaeoniflorin, suffruticosides A, B, C, and D, and a new paeonol glycoside named suffruticoside E have been isolated from Chinese Moutan Cortex, the root cortex of Paeonia suffruticosa ANDREWS, together with antioxidative galloyl-paeoniflorin. Their structures were elucidated on the basis of chemical and physicochemical evidences. Galloyl-oxypaeoniflorin, galloyl-paeoniflorin, suffruticosides A, B, C, and D showed more potent radical scavenging and antioxidative effects than alpha-tocopherol.     

6-Gingesulfonic acid, a new anti-ulcer principle, and gingerglycolipids A, B, and C, three new monoacyldigalactosylglycerols, from zingiberis rhizoma originating in Taiwan.

By monitoring the effects on HCl/ethanol-induced gastric lesions in rats, a new antiulcer principle named 6-gingesulfonic acid was isolated from Zingiberis Rhizoma, the dried rhizome of Zingiber officinale Roscoe (cultivated and processed in Taiwan) together with three new monoacyldigalactosylglycerols named gingerglycolipids A, B and C. Their chemical structures were elucidated on the basis of chemical and physicochemical evidence. 6-Gingesulfonic acid showed more potent anti-ulcer activity than 6-gingerol and 6-shogaol.     

Structural transition of actin filament in a cell-sized water droplet with a phospholipid membrane

Actin filament, F-actin, is a semiflexible polymer with a negative charge, and is one of the main constituents of cell membranes. To clarify the effect of cross talk between a phospholipid membrane and actin filaments in cells, we conducted microscopic observations on the structural changes in actin filaments in a cell-sized (several tens of micrometers in diameter) water droplet coated with a phospholipid membrane such as phosphatidylserine (PS; negatively charged head group) or phosphatidylethanolamine (PE; neutral head group) as a simple model of a living cell membrane. With PS, actin filaments are distributed uniformly in the water phase without adsorption onto the membrane surface between 2 and 6 mM Mg2+, while between 6 and 12 mM Mg2+, actin filaments are adsorbed onto the inner membrane surface. With PE, the actin filaments are uniformly adsorbed onto the inner membrane surface between 2 and 12 mM Mg2+. With both PS and PE membranes, at Mg2+ concentrations higher than 12 mM, thick bundles are formed in the bulk water droplet accompanied by the dissolution of actin filaments from the membrane surface. The attraction between actin filaments and membrane is attributable to an increase in the translational entropy of counterions accompanied by the adsorption of actin filaments onto the membrane surface. These results suggest that a microscopic water droplet coated with phospholipid can serve as an easy-to-handle model of cell membranes.     

Concise,Single‐Step Synthesis of Sulfur‐Enriched Graphene: Immobilization of Molecular Clusters and Battery Applications

The concise synthesis of sulfur‐enriched graphene for battery applications is reported. The direct treatment of graphene oxide (GO) with the commercially available Lawesson's reagent produced sulfur‐enriched‐reduced GO (S‐rGO). Various techniques, such as X‐ray photoelectron spectroscopy (XPS), confirmed the occurrence of both sulfur functionalization and GO reduction. Also fabricated was a nanohybrid material by using S‐rGO with polyoxometalate (POM) as a cathode‐active material for a rechargeable battery. Transmission electron microscopy (TEM) revealed that POM clusters were individually immobilized on the S‐rGO surface. This battery, based on a POM/S‐rGO complex, exhibited greater cycling stability for the charge‐discharge process than a battery with nanohybrid materials positioned between the POM and nonenriched rGO. These results demonstrate that the use of sulfur‐containing groups on a graphene surface can be extended to applications such as the catalysis of electrochemical reactions and electrodes in other battery systems.     

Nanotransfer of the polythiophene molecular alignment onto the step-bunched vicinal Si(111) substrate

A poly(3-dodecylthiophene-2,5-diyl) film having in-plane anisotropic molecular arrangement was successfully fabricated by transferring its Langmuir-Blodgett film onto a step-bunched Si(111) substrate. Polarized near-edge X-ray absorption fine structure measurements revealed that the polythiophene main chains are preferentially orientated along periodic facet/terrace nanostructures on the step-bunched substrate, whereas less anisotropy was found on a flat substrate. The step-bunched Si substrate has been proved to be effective for controlling the in-plane molecular arrangement in the polymer thin film.     

Folding transition of a single semiflexible polyelectrolyte chain through toroidal bundling of loop structures

We consider how the DNA coil-globule transition progresses via the formation of a toroidal ring structure. We formulate a theoretical model of this transition as a phenomenon in which an unstable single loop generated as a result of thermal fluctuation is stabilized through association with other loops along a polyelectrolyte chain. An essential property of the chain under consideration is that it follows a wormlike chain model. A toroidal bundle of loop structures is characterized by a radius and a winding number. The statistical properties of such a chain are discussed in terms of the free energy as a function of the fraction of unfolded segments. We also present an actual experimental observation of the coil-globule transition of single giant DNA molecules, T4 DNA (165.5 kbp), with spermidine (3+), where intrachain phase segregation appears at a NaCl concentration of more than 10 mM. Both the theory and experiments lead to two important points. First, the transition from a partially folded state to a completely folded state has the characteristics of a continuous transition, while the transition from an unfolded state to a folded state has the characteristics of a first-order phase transition. Second, the appearance of a partially folded structure requires a folded structure to be less densely packed than in the fully folded compact state.