Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Enthalpically and Entropically Favorable Self-Assembly: Synthesis of C4h-Symmetric Tetraazatetrathia[8]circulenes by Regioselective Introduction of Pyridine Rings

Self-assembly of π-conjugated molecules in solution generally occurs owing to either an enthalpic or an entropic gain; however, designing π-conjugated systems that simultaneously exhibit enthalpically and entropically favorable self-assembly behavior is challenging. Herein, the self-assembly behavior of tetraazatetrathia[8]circulenes is disclosed, which is driven by both enthalpy and entropy. Single-crystal X-ray diffraction analysis demonstrated that molecules of these tetraazatetrathia[8]circulenes form face-to-face stacked dimers with a 1D columnar structure owing to the circularly arranged dipole moments. Importantly, concentration- and temperature-dependent ¹H NMR spectra revealed that the formation of self-assemblies of tetraazatetrathia[8]circulenes in chloroform and methanol is favored by both enthalpic and entropic factors. The unique association behavior is due to the presence of sp²-hybridized nitrogen atoms, which weakly coordinate to the hydrogen atoms of these solvents and reduce the π-electron density of the circulene cores.     

Quadruply BN-Fused Tetrathia[8]circulenes with Flexible Frameworks: Synthesis,Structures and Properties

Quadruply BN-fused tetrathia[8]circulenes were synthesized through four-fold electrophilic borylation. The single-crystal X-ray diffraction analysis revealed that the BN-fused tetrathia[8]circulene with peripheral phenyl groups exhibits crystal polymorphism, in which the circulene core adopts both planar and saddle conformations in the solid state. The experimental and theoretical studies revealed that the weaker aromaticity of azaborine compared with benzene renders the flexibility of the BN-fused tetrathia[8]circulenes.     

Second-derivative spectrophotometric study on the interactions of chlorpromazine and triflupromazine with bovine serum albumin

The second-derivative spectra of chlorpromazine (CPZ) or triflupromazine (TFZ) in buffer solutions (pH 7.4) containing various amounts of BSA (the reference solutions contained the same amount of BSA) showed derivative isosbestic points. The residual background signals derived from incomplete suppression of BSA signals can be entirely eliminated in the second-derivative spectra and BSA has spectrophotometrically one kind of binding site for CPZ or TFZ. The fractions of the drugs bound to BSA were calculated from the derivative intensity differences (ΔD values) of CPZ or TFZ before and after the addition of BSA. Scatchard plot experiments suggested that the binding of the drugs to BSA could be explained as a partition like non-specific binding model. The association constants (K) of CPZ or TFZ with BSA were calculated from the ΔD values according to the non-specific binding model by a nonlinear least-squares method. The K values were almost constant for all of the drug concentrations studied, and good reproducibility was obtained. The fractions predicted by the K values were in good coincidence to the observed values. These results confirm the usefulness of the proposed derivative method which does not need any separation procedures.     

Imaging of a pH-sensitive polymer brush on a porous membrane using atomic force microscopy in aqueous solution

Poly(methacrylic acid) was grafted on a nanoporous polycarbonate membrane using the glow-discharge method. Atomic force microscopy showed that the pore size is dependent upon pH in such a way that a low pH the graft chains are protonated and contracted to open the pore, whereas at high pH, the graft chains became extended, thus reducing the pore size. Water permeation through the graft membrane is regulated by the pH value. The permeation rate is low at high pH value and high at low pH. This phenomenon corresponds to the pore size.     

Biodegradation of chitin with enzymes and vital components

Chitin from squid pen was effectively degraded by the chitinase from Bacillus sp. PI-7S, while the degradation of chitin with lysozyme proceeded very slowly. Among the various vital components studied, the degradation of chitin from squid pen was performed not by canine serum, canine tela subcutanea, canine tela liver, and equine serum but by bovine serum and caprine serum. Noteworthy is the fact that chitin sponge subcutaneously implanted in dog reported not to have chitinase was degraded in ca. 14 days.     

Defect Formation,T-Atom Substitution and Adsorption of Guest Molecules in MSE-Type Zeolite Framework—DFT Modeling

We used computational modeling, based on Density Functional Theory, to help understand the preference for the formation of silanol nests and the substitution of Si by Ti or Al in different crystallographic positions of the MSE-type framework. All these processes were found to be energetically favorable by more than 100 kJ/mol. We suggested an approach for experimental identification of the T atom position in Ti-MCM-68 zeolite via simulation of infrared spectra of pyridine and acetonitrile adsorption at Ti. The modeling of adsorption of hydrogen peroxide at Ti center in the framework has shown that the molecular adsorption was preferred over the dissociative adsorption by 20 to 40 kJ/mol in the presence or absence of neighboring T-atom vacancy, respectively.     

In situ FTIR studies of primary intermediates of photocatalytic reactions on nanocrystalline TiO2 films in contact with aqueous solutions

Multiple internal reflection infrared spectroscopy was applied to in situ investigations of surface intermediates of photocatalytic reactions on nanocrystalline TiO(2) films in contact with aqueous solutions. UV irradiation in the presence of dissolved O(2) caused the appearance of new bands peaked at 943, 838, and 1250-1120 cm(-)(1) together with intensity changes in other bands. Investigations of influences of the solution pH, the presence or absence of hole and electron scavengers, and isotopic H(2)O --> D(2)O exchange on the spectral changes have revealed that the primary step of photocatalytic O(2) reduction is the formation of the surface peroxo species, Ti(O(2)), giving the 943 cm(-)(1) band, probably with the surface superoxo species, TiOO., as a precursor, in neutral and acidic solutions. The surface peroxo species is then transformed to the surface hydroperoxo, TiOOH, giving the 838 and 1250-1120 cm(-)(1) bands, by protonation in the dark. This is, to our knowledge, the first direct in situ spectroscopic detection of primary intermediates for the photocatalytic O(2) reduction in aqueous solutions. On the basis of the assignment, a possible reaction scheme for various processes of the photocatalytic O(2) reduction is proposed, which is in harmony with other spectral changes induced by the UV irradiation.     

Nickel-catalyzed intermolecular coupling of 1,3-dienes and aldehydes via transmetalation of nickelacycles with diisobutylaluminum acetylacetonate

Intermolecular coupling reactions of 1,3-dienes and aldehydes via transmetalation of nickelacycle intermediate with (i)Bu(2)Al-acac were investigated. In the reactions, a linear adduct or a branched adduct was produced, depending upon the nature of 1,3-dienes and aldehydes, via two nickelacycles that were relatively stable among the four possible nickelacycles because of the equilibrium with pi-allynickel forms.