Ligand binding properties of myoglobin reconstituted with iron porphycene: unusual O2 binding selectivity against CO binding

Sperm whale myoglobin, an oxygen storage hemoprotein, was successfully reconstituted with the iron porphycene having two propionates, 2,7-diethyl-3,6,12,17-tetramethyl-13,16-bis(carboxyethyl)porphycenatoiron. The physicochemical properties and ligand bindings of the reconstituted myoglobin were investigated. The ferric reconstituted myoglobin shows the remarkable stability against acid denaturation and only a low-spin characteristic in its EPR spectrum. The Fe(III)/Fe(II) redox potential (-190 mV vs NHE) determined by the spectroelectrochemical measurements was much lower than that of the wild-type. These results can be attributed to the strong coordination of His93 to the porphycene iron, which is induced by the nature of the porphycene ring symmetry. The O2 affinity of the ferrous reconstituted myoglobin is 2600-fold higher than that of the wild-type, mainly due to the decrease in the O2 dissociation rate, whereas the CO affinity is not so significantly enhanced. As a result, the O2 affinity of the reconstituted myoglobin exceeds its CO affinity (M' = K(CO)/K(O2) < 1). The ligand binding studies on H64A mutants support the fact that the slow O2 dissociation of the reconstituted myoglobin is primarily caused by the stabilization of the Fe-O2 sigma-bonding. The IR spectra for the carbon monoxide (CO) complex of the reconstituted myoglobin suggest several structural and/or electrostatic conformations of the Fe-C-O bond, but this is not directly correlated with the CO dissociation rate. The high O2 affinity and the unique characteristics of the myoglobin with the iron porphycene indicate that reconstitution with a synthesized heme is a useful method not only to understand the physiological function of myoglobin but also to create a tailor-made function on the protein.     

Catalytic enantioselective Michael addition of 1,3-dicarbonyl compounds to nitroalkenes catalyzed by well-defined chiral ru amido complexes

Well-defined chiral Ru amido complexes promoted asymmetric Michael addition of 1,3-dicarbonyl compounds including malonates, beta-keto esters, and 1,3-diketones to nitroalkenes to give the corresponding adducts with excellent ees and in excellent yields.     

Catalytic specificity exhibited by p-sulfonatocalix[n]arenes in the methanolysis of N-acetyl-l-amino acids

Specific acid catalysis of p-sulfonatocalix[n]arenes (n = 4, Calix-S4; n = 6, Calix-S6; n = 8, Calix-S8) was observed in the alcoholysis of N-acetyl-l-amino acids in methanol. The methanolysis rates of basic amino acid substrates (His, Lys, and Arg) were markedly enhanced in the presence of Calix-Sn, as compared with rates observed with p-hydroxybenzenesulfonic acid (pHBS), which is a noncyclic analogue of Calix-Sn. This catalytic effect of Calix-Sn was not observed for the methanolysis of Phe, Tyr, and Trp substrates. On the other hand, (1)H NMR experiments following the effect of Calix-Sn on N-acetyl-l-amino acid substrates in CD(3)OD showed that the spectrum of a mixture of the His substrate with Calix-Sn was significantly different from the combined spectra of the respective compounds. These changes in spectra support the formation of an inclusion complex of Calix-Sn with basic amino acids. Furthermore, it was obvious that methanolysis of the His substrate catalyzed by Calix-S4 and Calix-S6 obeyed Michaelis-Menten kinetics. These results indicate that the catalytic activity of Calix-Sn originates from its forming a complex with specific substrates (basic amino acids), similar to enzymatic reactions.     

Extraction Equilibria between Benzene and Water of Uni- and Bivalent Metal Picrates with Lariat 16-Crown-5: Effect of the Side Arms on the Extraction Ability and Selectivity

The overall extraction constants (K_ex) of uni- andbivalent metal picrates with 15-(2,5-dioxahexyl)-15-methyl-16-crown-5(L16C5) were determined between benzene and water at 25°C. TheK_ex values were analyzed into the constituent equilibriumconstants, i.e., the extraction constant of picric acid, the distributionconstant of the crown ether, the stability constant of the metalion–crown ether complex in water, and the ion-pair extraction constantof the complex cation with the picrate anion. The K_ex valuedecreases in the orders Ag⁺ > Na⁺ >Tl⁺ > K⁺ > Li⁺ andPb²⁺ > Ba²⁺ > Sr²⁺ for theuni- and bivalent metals, respectively, which are the same as those observedfor 16C5. The extraction selectivity was found to be governed by theselectivity of the ion-pair extraction of the L16C5–metal picratecomplex rather than by that of the complex formation in water. Theextraction ability of L16C5 is smaller for all the metals than that of 16C5,which is mostly attributed to the higher lipophilicity of L16C5. Differencesin the extraction selectivity between L16C5 and 16C5 were observed for thebivalent metals but little for the univalent metals. The side-arm effect onthe extraction selectivity was interpreted on the basis of the negativecorrelation between the effect on the complex stability constant in waterand that on the ion-pair extraction constant.     

Distorted Porphyrins with High Stability: Synthesis and Characteristic Electronic Properties of Mono- and Di-Nuclear Tricarbonyl Rhenium Tetraazaporphyrin Complexes

Mono- and di-nuclear tricarbonyl Re(I) tetraazaporphyrin complexes ( Re₁TAP and Re₂TAP ) are investigated and compared with Re(I) phthalocyanine complexes ( Re₁Pc and Re₂Pc ). Although Re₂Pc is unstable in polar solvents, and easily undergoes demetallation reaction, the coordination of the TAP ligand significantly improves the tolerance toward polar solvents, affording more stability to Re₂TAP . Additionally, the incorporation of [Re(CO)₃]⁺ unit(s) and the TAP ligand results in remarkable positive shifts in both oxidation and reduction potentials. Consequently, the more positive oxidation potentials of the ReTAP complexes significantly increase the tolerance toward oxidation, while the reduction potential indicates that Re₂TAP is suitable for a soluble electron acceptor. In contrast to Re₁Pc and Re₂Pc , Re₁TAP and Re₂TAP show unique broad Q bands, which can be attributed to the admixture of the π-π* and metal-to-ligand charge transfer characters, owing to the lowered π orbital energy in the TAP complexes. This study is useful for controlling electronic properties and realizing high stability in Pc analogues.     

Physical and Chemical Properties of Four-Membered Bis(triphenylphosphane)platinum(II) Sulfenato Thiolato Complexes

The reaction of isolable dithiirane 1-oxides with (Ph 3 P) 2 Pt( m 2 -C 2 H 4 ) provided the title complexes in high yields. 31 P NMR spectroscopy of the phosphine ligands of the complexes and x-ray crystallographic analysis of a complex were reported.     

1,4‐Bis[2‐(4‐ferrocenylphenyl)ethynyl]anthraquinone from synchrotron X‐ray powder diffraction

The title compound, [Fe₂(C₅H₅)₂(C₄₀H₂₂O₂)] or 1,4‐(FcPh)₂Aq [where FcPh is 2‐(4‐ferrocenylphenyl)ethynyl and Aq is anthraquinone], was synthesized in an attempt to obtain a new solvent‐incorporating porous material with a large void space. Thermodynamic data for 1,4‐(FcPh)₂Aq show a phase transition at approximately 430 K. The crystal structure of solvent‐free 1,4‐(FcPh)₂Aq was determined at temperatures of 90, 300 and 500 K using synchrotron powder diffraction data. A direct‐space method using a genetic algorithm was employed for structure solution. Charge densities calculated from observed structure factors by the maximum entropy method were employed for model improvement. The final models were obtained through multistage Rietveld refinements. In both phases, the structures of which differ only subtly, the planar Aq fragments are stacked alternately in opposite orientations, forming a one‐dimensional column. The FcPh arms lie between the stacks and fill the remaining space, leaving no voids. C—H...π interactions between the Ph and Fc fragments mediate crystal packing and stabilization.     

A Puckered Singlet Cyclopentane‐1,3‐diyl: Detection of the Third Isomer in Homolysis

In the photochemical denitrogenation of 1,4‐diaryl‐2,3‐diazabicyclo[2.2.1]heptane ( AZ6 ) bearing sterically hindered substituents, a curious new absorption band at about 450 nm was observed under low‐temperature matrix conditions, together with the previously well‐characterized planar singlet diradical pl‐¹ DR6 with λ_max=≈580 nm. The 450 nm species was electron paramagnetic resonance (EPR)‐silent. Instead of generating the planar diradical pl‐¹ DR6 and the precursor azoalkane AZ6 upon warming, the ring‐closed bicyclo[2.1.0]pentane derivative SB6 , that is, the AZ6 denitrogenation product was identified. Based on product analysis, low‐temperature spectroscopic observations, high‐level quantum‐mechanical computations, viscosity effect, and laser‐flash photolysis, the puckered singlet diradicaloid puc‐¹ DR6 was assigned to the new 450 nm absorption. The latter was detected experimentally at the same time as the planar singlet diradical pl‐¹ DR6 . Sterically demanding substituents as well as viscosity impediments were essential for the detection of the experimentally hitherto unknown puckered singlet cyclopentane‐1,3‐diyl diradicaloid puc‐¹ DR6 , that is, the third isomer in homolysis. The present findings should stimulate future work on the mechanistically fascinating stereoselectivity documented in the formation of bicyclo[2.1.0]pentanes during the 2,3‐diazabicyclo[2.2.1]heptane denitrogenation.