Birefringent side-hole fiber for use in strain sensor

Novel birefringent single-mode fibers are fabricated with a vacant hole on either side of the central elliptical core, referred to as side-hole fiber, and their intrinsic and tension-induced modal birefringences are measured to know their characteristic properties for the purpose of making a strain sensor. Five sampled side-hole fibers are prepared for measurements. The sensitivity of the strain sensor is primarily determined by two parameters, tension-induced and intrinsic modal birefringences. Tension-induced modal birefringence is controllable by optimal arrangement of the size and location of the side-holes in the cross-section of the fiber. A sensitivity diagram for designating and fabricating side-hole fibers is presented.     

Asymmetric borane reduction of ketones promoted by menthopyrazole‐zncl2 complex

The enantioselective reduction of ketones was accomplished by borane in the presence of pyrazole derivatives, particularly 2‐methoxymethyl‐3‐phenyl‐1‐menthopyrazole (8). The catalysis of zinc chloride makes it possible to lower the reaction temperature below 0 °C, and to promote enantioselectivity.     

Shape‐Selective Alkylation of Naphthalene over Zeolites: Steric Interaction of Reagents with Zeolites

Steric interaction of reagents with zeolites was studied in isopropylation, sec‐butylation, and tert‐butylation of naphthalene (NP) over several large‐pore zeolites to elucidate the mechanism of selective catalysis. Selectivities for dialkylnaphthalene (DAN) isomers were influenced by the type of zeolite and bulkiness of alkylating agent. Selective formation of β,β‐ and 2,6‐diisopropylnaphthalene (DIPN) occurred only over H‐mordenite (MOR) in the isopropylation of NP using propene; bulky transition states of α,α‐ and α,β‐DIPN are excluded because of steric restriction by the channels, resulting in selective formation of β,β‐ and 2,6‐DIPN. However, low selectivities for β,β‐ and 2,6‐DIPN were observed over the zeolites, SSZ‐24 (AFI), SSZ‐55 (ATS), and SSZ‐42 (IFR) with 12‐membered‐ring (12‐MR) pore entrances of one‐dimensional channels, CIT‐5 (CFI), UTD‐1 (DON), and SSZ‐53 (SFH) with 14‐membered‐ring (14‐MR) pore entrances of one‐dimensional channels, and Y‐zeolite (FAU), zeolite β (BEA), and CIT‐1 (CON) with 12‐MR pore entrances of three‐dimensional channels, because their channels are too large for the exclusion of bulky isomers. Catalysis over these zeolites occurs under kinetic and/or thermodynamic control, resulting in predominant formation of α,α‐ and α,β‐DIPN at lower temperatures and an increase of the stable isomer β,β‐DIPN at higher temperatures. The selectivities for β,β‐ and 2,6‐DAN were enhanced with the increase in bulkiness of alkylating agents: 1‐butene for sec‐butylation and 2‐methylpropene for tert‐butylation. In particular, β,β‐di‐tert‐butylnaphthalene (DTBN) was selectively formed in the tert‐butylation. The selectivities for β,β‐ and 2,6‐DAN were enhanced even in large channels: the transition states of the least bulky isomers only fit the channels because other bulky isomers are excluded by steric restriction of the channels. However, tert‐butylation over FAU, BEA, and CON had selectivities for 2,6‐DTBN of around 50–60%, although selectivities for β,β‐DTBN were almost 100% selectivity; these zeolites can hardly recognize the differences between 2,6‐ and 2,7‐DTBN. The results indicate that the fitting of the least bulky isomers to zeolite channels, leading to the exclusion of other bulky isomers, is essential for highly shape‐selective catalysis.     

High-Pressure Synthesis of Fully Occupied Tetragonal and Cubic Tungsten Bronze Oxides

A high-pressure reaction yielded the fully occupied tetragonal tungsten bronze K₃W₅O₁₅ (K_0.6WO₃). The terminal phase shows an unusual transport property featuring slightly negative temperature-dependence in resistivity (dρ/dT<0) and a large Wilson ratio of R_W=3.2. Such anomalous metallic behavior possibly arises from the low-dimensional electronic structure with a van Hove singularity at the Fermi level and/or from enhanced magnetic fluctuations by geometrical frustration of the tungsten sublattice. The asymmetric nature of the tetragonal tungsten bronze K_xWO₃-K_0.6−yBa_yWO₃ phase diagram implies that superconductivity for x≤0.45 originates from the lattice instability because of potassium deficiency. A cubic perovskite KWO₃ phase was also identified as a line phase—in marked contrast to Na_xWO₃ and Li_xWO₃ with varying quantities of x (<1). This study presents a versatile method by which the solubility limit of tungsten bronze oxides can be extended.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Enthalpically and Entropically Favorable Self-Assembly: Synthesis of C4h-Symmetric Tetraazatetrathia[8]circulenes by Regioselective Introduction of Pyridine Rings

Self-assembly of π-conjugated molecules in solution generally occurs owing to either an enthalpic or an entropic gain; however, designing π-conjugated systems that simultaneously exhibit enthalpically and entropically favorable self-assembly behavior is challenging. Herein, the self-assembly behavior of tetraazatetrathia[8]circulenes is disclosed, which is driven by both enthalpy and entropy. Single-crystal X-ray diffraction analysis demonstrated that molecules of these tetraazatetrathia[8]circulenes form face-to-face stacked dimers with a 1D columnar structure owing to the circularly arranged dipole moments. Importantly, concentration- and temperature-dependent ¹H NMR spectra revealed that the formation of self-assemblies of tetraazatetrathia[8]circulenes in chloroform and methanol is favored by both enthalpic and entropic factors. The unique association behavior is due to the presence of sp²-hybridized nitrogen atoms, which weakly coordinate to the hydrogen atoms of these solvents and reduce the π-electron density of the circulene cores.     

Quadruply BN-Fused Tetrathia[8]circulenes with Flexible Frameworks: Synthesis,Structures and Properties

Quadruply BN-fused tetrathia[8]circulenes were synthesized through four-fold electrophilic borylation. The single-crystal X-ray diffraction analysis revealed that the BN-fused tetrathia[8]circulene with peripheral phenyl groups exhibits crystal polymorphism, in which the circulene core adopts both planar and saddle conformations in the solid state. The experimental and theoretical studies revealed that the weaker aromaticity of azaborine compared with benzene renders the flexibility of the BN-fused tetrathia[8]circulenes.     

Second-derivative spectrophotometric study on the interactions of chlorpromazine and triflupromazine with bovine serum albumin

The second-derivative spectra of chlorpromazine (CPZ) or triflupromazine (TFZ) in buffer solutions (pH 7.4) containing various amounts of BSA (the reference solutions contained the same amount of BSA) showed derivative isosbestic points. The residual background signals derived from incomplete suppression of BSA signals can be entirely eliminated in the second-derivative spectra and BSA has spectrophotometrically one kind of binding site for CPZ or TFZ. The fractions of the drugs bound to BSA were calculated from the derivative intensity differences (ΔD values) of CPZ or TFZ before and after the addition of BSA. Scatchard plot experiments suggested that the binding of the drugs to BSA could be explained as a partition like non-specific binding model. The association constants (K) of CPZ or TFZ with BSA were calculated from the ΔD values according to the non-specific binding model by a nonlinear least-squares method. The K values were almost constant for all of the drug concentrations studied, and good reproducibility was obtained. The fractions predicted by the K values were in good coincidence to the observed values. These results confirm the usefulness of the proposed derivative method which does not need any separation procedures.