Application of non-thermal atmospheric pressure ac plasmas to the carbon dioxide reforming of methane

Methane conversions of 11.9%, yields of hydrogen as high as 23.3% and energy yields of 1.0 mol H₂/kWh have been achieved from CO₂ reforming of CH₄ in non-thermal, atmospheric pressure plasma reactors with Pt coated electrodes. Two reactors have been studied. A novel fan type reactor consisting of a movable rotor and immobile stator produced the highest yields in contrast to a tube type (silent discharge) reactor with a glass dielectric barrier. Conversions, yields of hydrogen and energy yields (expressed as mol H₂/kWh) were studied for CO₂/CH₄ concentrations of 1.1% and 5.0% in He as a function of flow rate and input voltage. Hydrogen yields are observed to increase as the input voltage is increased from 411 V to 911 V and the flow rate is decreased from 100 cc/min to 30 cc/min. Energy yields vary only slightly with input voltage and flow rate. Hydrogen yields show little dependence on CO₂/CH₄ concentrations, but energy yields are approximately five times greater for the 5.0% mixture than the 1.1% mixture. Selectivities to H₂, CO, coke, and low molecular weight hydrocarbons were also evaluated and compared to data obtained without CO₂ in the feed. Hydrogen selectivities of nearly 100% were obtained, with small amounts of ethane and propane as the only observed side products and the selectivites were approximately the same whether CO₂ was present or absent in the mixture. However, the reaction proceeds much more cleanly when CO₂ is present, producing CO. The syngas product has an H₂ : CO ratio of 1.5 with the fan type reactor and 0.67 with the tubular reactor. In the absence of CO₂, coke is the main carbonaceous product. Under all conditions studied the fan type reactor demonstrated higher methane conversions (up to 11.9%) and selectivities to hydrogen.     

Polyiodide composition in poly(vinyl acetate)-iodine-iodide complex

Polyiodide formed by complexation of poly(vinyl acetate) (PVAc) with iodine in the presence of iodide has been investigated by chemical analysis and resonance Raman spectrophotometry. When PVAc films were immersed in iodide-iodine aqueous solutions which had different ratios of iodide to iodine concentration [I^?]/[I₂], the complex films exhibited tremendous variations of swelling degree, despite the relatively small change in the amount of bound iodine. From a quantitative chemical analysis, the composition of polyiodide bound to PVAc was found to be 1.01 ± 0.035 in the molar ratio of iodide to iodine irrespective of the composition of the iodide-iodine aqueous solution ([I^?]/[I₂] = 2–500). The polyiodide formed in PVAc-iodine-iodide complex was therefore inferred to be (I₃^?)_n. Resonance Raman spectra obtained on PVAc-iodine-iodide complexes were also identical to those of the benzamide-iodine complex, in which the polyiodide consists of (I₃^?)_n, consistent with the result from chemical analysis.     

Comparisons of several dead time correction methods in the case of a mixture of short- and long-lived nuclides

Several dead time correction methods were compared experimentally with the exact correction method and their limits were discussed. These correction methods were applied to neutron activation analysis of a biological sample. A special electronic circuit and an additional counting equipment were used to obtain the fractional dead time with a suficiently high frequency.     

Diastereoselective synthesis of psi[(E)-CH=CMe]- and psi[(Z)-CH=CMe]-type dipeptide isosteres by organocopper-mediated anti-S(N)2' reaction

[reaction: see text] Acyclic psi[(E)-CH=CMe]- and psi[(Z)-CH=CMe]-type dipeptide isosteres were efficiently synthesized. In a key reaction, alpha-alkylation of gamma-mesyloxy-beta-methyl-alpha,beta-unsaturated esters with organocyanocuprates in diethyl ether or tetrahydrofuran preferentially afforded the psi[(E)-CH=CMe]- or psi[(Z)-CH=CMe]-isomer, respectively, via anti-S(N)2' mechanism.     

Determination of glutamate-pyruvate transaminase activity in blood serum with a pyruvate oxidase/poly(vinyl chloride) membrane sensor

Pyruvate oxidase (E.C. 1.2.3.3.) is immobilized by adsorption on a wet PVC membrane. Glutamate-pyruvate transaminase activity (5–1600 IU l^?1) in serum is determined by a pyruvate oxidase sensor consisting of the immobilized pyruvate oxidase coupled to a platinum electrode for measuring hydrogen peroxide, after an l-alanine—α-ketoglutarate reaction. The assay requires ?60 s, and has a precision of 2–3%. Endogenous pyruvate should not interfere if measurements are made > 30 s after starting the reaction.     

New method for the determination of pentachlorophenol by atomic absorption spectrophotometry

A new application of atomic absorption is reported for the determination of pentachlorophenol. The method is based on solvent extraction into nitrobenzene of the ion-pair formed between tris(1,10-phenanthroline) iron(II) and the anion of pentachlorophenol, and the subsequent determination of the iron concentration m the extract by atomic absorption at the 2483 A iron line.     

Different reaction modes for the oxidative dimerization of epoxyquinols and epoxyquinones. Importance of intermolecular hydrogen-bonding

An oxidative dimerization reaction, involving the three successive steps of oxidation, 6 pi-electrocyclization, and Diels-Alder reaction, has been experimentally and theoretically investigated for the three 2-alkenyl-3-hydroxymethyl-2-cyclohexen-1-one derivatives epoxyquinol 3, epoxyquinone 6, and cyclohexenone 10. Of the sixteen possible modes of the oxidation/6 pi-electrocylization/Diels-Alder reaction cascade for the epoxyquinone 6, and eight for the cyclohexenone 10, only the endo-anti(epoxide)-anti(Me)-hetero and endo-anti(Me)-hetero modes are, respectively, observed, while both endo-anti(epoxide)-anti(Me)-hetero and exo-anti(epoxide)-anti(Me)-homo reaction modes occur with the epoxyquinol 3. Intermolecular hydrogen-bonding is found to be the key cause of formation of both epoxyquinols A and B with 3, although epoxyquinone 6 and cyclohexenone 10 both gave selectively only the epoxyquinol A-type product. In the dimerization of epoxyquinol 3, two monomer 2H-pyrans 5 interact with each other to afford intermediate complex 28 or 29 stabilized by hydrogen-bonding, from which Diels-Alder reaction proceeds. Theoretical calculations have also revealed the differences in the reaction profiles of epoxyquinone 6 and cyclohexenone 10. Namely, the rate-determining step of the former is the Diels-Alder reaction, while that of the latter is the 6 pi-electrocyclization.     

TUMOR IMAGING WITH [111niIn]MONO-DTPA-ETHYLENEGLYCOL-Ga-DEUTEROPORPHYRIN

Abstract Mono-DPTA-ethyleneglycol-Ga-deuteroporphyrin (MDEGD) was synthesized, by coordinating non-radioactive Ga in the porphyrin ring and connecting DTPA (diethylene-triamine-N,N,N,N,N,-pentaacetic acid) to its side chain. By labeling with 111_In, chemicals for scintigraphy were developed. They were applied to Syrian golden hamsters with implanted pancreatic gland cancers and C57-black mice with Lewis lung cancer to enable tumor imaging and biodistribution examination. A comparative study was also conducted with [⁶⁷Ga]citrate. In the resultant data, [¹¹¹In]MDEGD showed larger tumor/lung, tumor/kidney and tumor/blood ratio with [⁶⁷Ga]citrate. The affinity of [ⁿIn]MDEGD in inflammatory tissue was much lower than that of ⁶⁷Ga citrate. [¹¹¹In]MDEGD lost its photosensitivity.     

Synthesis of thromboxane A2 analog DL-(9,11), (11,12)-dideoxa-(9,11)-epithio-(11,12)-methylene-thromboxane A2

A synthesis of the thromboxane A₂ analog, $\text{dl}$-(9,11), (11,12)-dideoxa-(9,11)-epithio-(11,12)-methylene-thromboxane A₂ is described.     

Automated direct high-performance liquid chromatographic assay for estetrol, estriol, cortisone and cortisol in serum and amniotic fluid.

An automated direct assay for the simultaneous determination of unconjugated estetrol, estriol, cortisone and cortisol in serum and amniotic fluid, using high-performance liquid chromatography with electrochemical detection and ultraviolet detection, has been developed. The analysis time is ca. 1 h. This system offers good reproducibility with low coefficients of variation (estetrol, 2.3%; estriol, 2.3%; cortisone, 2.6%; cortisol, 1.9%). Detection limits are low enough for routine determinations (estetrol and estriol, 150 pg; cortisone and cortisol, 5 ng). Comparison of the values measured by the present method and by radioimmunoassay revealed significant correlations for estetrol (r = 0.787, p less than 0.01), estriol (r = 0.957, p less than 0.01), cortisone (r = 0.956, p less than 0.01) and cortisol (r = 0.865, p less than 0.01). This system proved to be valuable in monitoring feto-placental function.