基于低相干光的阵列透镜束匀滑技术研究

基于激光加载的材料状态方程的实验研究对靶面光强分布的均匀性及稳定性提出了极高的要求,靶面光强的上述两大特性在很大程度上决定了实验结果的精度和可重复性.本文针对传统窄带高相干激光装置在激光加载材料状态方程实验中表现出的靶面光强均匀性和光强分布稳定性两方面可能存在的问题,提出了基于宽带低相干激光,利用消衍射阵列透镜联合诱导非相干技术的束匀滑方案,并重点分析了波前相位畸变对靶面不均匀性及稳定性的影响.模拟结果表明,该方法明显降低了靶面不均匀性,提高了对波前相位畸变的包容度,获得了均匀、稳定的光强分布.统计分析显示,焦斑强度分布极差和不均匀性与波前相位畸变均方根梯度相关性较强.因此,可以根据统计结果以及实验对焦斑强度分布的要求,给出波前相位畸变的容差范围,对状态方程实验中激光驱动器参数的设计与优化具有指导意义.     

一种半球形天空亮度测量仪器的研制

在大气光学领域中,天空亮度分布有着重要的应用.简要介绍了天空亮度的测量原理,在分析同类测量仪器的基础上,提出了一种用于白天的,可见及近红外波段天空亮度测量仪器的设计,介绍了系统的组成和探测器的选择.经过定标,仪器能够得到天空亮度的绝对值,其结果反映了真实天空亮度分布的变化.该仪器弥补了传统的天空亮度测量仪器住测量波段、实时性、便携性等方面的不足,更好地满足了实际的科研需求.     

聚酰胺酸合成工艺研究

 采用超声波在线测量溶液粘度的方法，研究了合成聚酰胺酸过程中实验条件的影响，并对实验结果进行分析，由此确定了合成高分子量聚酰胺酸的最佳实验条件。研究表明：在加料次序为先加二胺后加二酐（二酐与二胺的摩尔比为1.01～1.02：1）、试剂中含水量尽可能少，反应温度0～5℃、反应时间以溶液粘度到达最大值为止的条件下，所合成的聚酰胺酸溶液粘度最大，可满足惯性约束聚变（ICF）充气腔靶端口膜的需要。     

叠加态下3色场波形优化增大谐波辐射截止能量及强度

在He~+离子1s态和2s态的叠加态作为初始态时,提出一种优化3束激光场来增大谐波截止能量和强度的方法.结果表明:在叠加初始态下,谐波强度要比基态初始态下增强3个数量级以上.随后,在3色场波形优化下,谐波截止能量又得到增大,进而获得一个高强度、高光子能量的谐波光谱连续区.通过叠加光谱连续区上最后100次的谐波可以获得一个27 as的孤立阿秒脉冲.     

压缩真空场与原子非线性作用过程中的纠缠与消纠缠

用Von Neumann熵研究了附加克尔介质的压缩真空场与二能级原子依赖强度耦合相互作用量子体系的量子纠缠特性.讨论了初始压缩真空场的压缩度以及克尔非线性作用的强度对该量子体系纠缠特性的影响.结果表明，克尔介质的非线性作用的强弱可以改变体系量子纠缠的周期性；在初始压缩度较大（r=5）时，克尔介质的非线性作用可导致原子与场持续地处于最大纠缠态，无消纠缠态或持续地处于消纠缠态. 关键词： 压缩真空态 克尔介质 依赖强度耦合J-C模型 Von Neumann熵 量子纠缠     

Preparation and performance of a novel polyimide foam

A new type of polyimide foam (PIF) was prepared and characterized based on a one‐pot process by the reaction of a first solution with different ratios of a second solution. The first solution was comprised of pyromellitic dianhydride (PMDA), N, N‐dimethyl formamide (DMF), methanol, water, surfactant, and catalysts, while the second solution contained polyaryl polymethylene isocyanate (PAPI). In the present study, the relationships among compositions, structures, and properties of PIFs were investigated. The results indicated that with the increase in the weight ratio of PAPI/(first solution), the foaming degrees of PIFs increased from 10.14 to 10.52 times and the apparent densities before postcure decreased from 15.96 to 14.51 kg/m³. The open cell contents, average sound absorption coefficients, and average cellular diameters of PIFs after postcure increased with increase in the weight ratio of PAPI/(first solution). The glass transition temperatures (T_g) of PIFs after postcure first increased from 287 to 299°C, then decreased to 292°C, and the 5% weight loss temperatures and 10% weight loss temperatures presented the same trend as well. The compressive and flatwise tensile properties scaled very well with the relative densities of the foams after postcure, with the highest compressive strength of 0.03 MPa and the highest flatwise tensile strength of 0.15 MPa. Copyright © 2011 John Wiley & Sons, Ltd.     

Real‐time reaction monitoring by probe electrospray ionization mass spectrometry

Probe electrospray ionization (PESI) is a modified version of the electrospray ionization (ESI), where the capillary for sampling and spraying is replaced by a solid needle. High tolerance to salts and direct ambient sampling are major advantages of PESI compared with conventional ESI. In this study, PESI‐MS was used to monitor some biological and chemical reactions in real‐time, such as acid‐induced protein denaturation, hydrogen/deuterium exchange (HDX) of peptides, and Schiff base formation. By using PESI‐MS, time‐resolved mass spectra and ion chromatograms can be obtained reproducibly. Real‐time PESI‐MS monitoring can give direct and detailed information on each chemical species taking part in reactions, and this is valuable for a better understanding of the whole reaction process and for the optimization of reaction parameters. PESI‐MS can be considered as a potential tool for real‐time reaction monitoring due to its simplicity in instrumental setup, direct sampling with minimum sample preparation and low sample consumption. Copyright © 2010 John Wiley & Sons, Ltd.     

A New Microporous Hydrogen-Bonding Framework Constructed from 1-(4-Hydroxyphenyl)-5-Thioacetatetetrazole

Abstract  

The new complex with flexible heterocyclic carboxylate ligand, [Ba(HL⁻)₂(H₂O)₃]·H₂O (H₂L = 1-(4-Hydroxyphenyl)-5-thioacetatetetrazole), were synthesized and structurally determined by X-ray diffraction analysis. The complex belongs to the monoclinic system, space group C2/c. The center Ba(II) is nine-coordinated by six carboxylate oxygen atoms from four HL-ligands and three water molecules in a distorted monocapped square trans-prism geometry. The ligand serves as a bridge to link two adjacent Ba(II) atoms into a chain structure which are further assembled into the final three-dimensional supramolecular architecture with microporous open channel via hydrogen bonds.     

Absolute exponential stability criteria for a class of nonlinear time-delay systems

This paper is concerned with the problem of absolute exponential stability analysis for a class of continuous-time systems with sector-bounded nonlinearities and interval time-varying delays. Absolute exponential stability criteria, which depend not only on the delay range but also on the decay rate, are derived by using a novel Lyapunov functional. These criteria are expressed in the form of linear matrix inequalities (LMIs) and they can easily be checked. By solving these LMIs, estimates of the exponential decay rate and decay coefficient are obtained. A numerical example is provided to demonstrate the effectiveness of the proposed method.     

Magnetization reversal of Fe ultrathin film on Cu(100)

The magnetization reversal of Fe/Cu(100) ultrathin films grown at room temperature is investigated by using an in situ magneto-optical Kerr effect polarimeter with a magnet that can rotate in a plane of incidence. There occur spin reorientation transitions from out-of-plane to in-plane magnetizations in 8 and 12 monolayers (ML) thick iron films. The coercive fields are observed to be proportional to the reciprocal of the cosine with respect to the easy axis, suggesting that the domain-wall displacement plays a main role in the magnetization reversal process.