电化学合成聚苯胺粉末电极的电化学行为研究

我们曾用慢速动电位扫描法研究化学合成聚苯胺粉末的电化学行为.本文对恒电位电解合成聚苯胺粉末进行了研究.用这种方法制备的粉末由于合成溶液中不含氧化剂因而纯度高.本文还报导了这种聚苯胺粉末电极的交流阻抗测量结果.交流阻抗法曾用于聚苯胺膜的电导和化学合成聚吡咯的电阻测定. 所用盐酸、氟硼酸、硅氟酸、苯胺均为分析纯;苯胺经常压蒸馏提纯;硫酸为超纯;磷酸为分析纯;高氯酸为优级纯.溶液皆用两次蒸馏水配制.     

低头-头链含量的聚偏氟乙烯合成

研究了偏氟乙烯的聚合条件与其聚合物的头-头链含量的关系。实验表明聚合物的头-头链的含量与聚合温度有关,而与引发剂的种类无关。因而,可以在较低的聚合温度下聚合制得带有低的头-头结构(约3％)的聚偏氟乙烯。将聚合物链的A结构含量对其熔点作图,得一直线,可表示为方程式A=24.8+0.362T_m(％)。     

NRET from naphthalene labels in multilayer shell wall on melamine formaldehyde microparticles fabricated with layer-by-layer self-assembly to pyrene-labeled polyelectrolyte in solution

Core-shell colloidal particles were prepared with the core of monodisperse melamine formaldehyde particles (MF) with a diameter of 3.5 μm. The shell deposited on the core by the layer-by-layer (LbL) self-assembly was made with a copolymer ANp3 of 2-acrylamido-2-methylpropanesulfonate sodium (AMPS) and 3 mol% naphthalene label monomer and poly(diallyldimethylammonium chloride) (PD). Nonradiative energy transfer (NRET) from the naphthalene labels deposited on the MF particles to pyrene labels at a polyelectrolyte APy3, a copolymer of AMPS and 3 mol% pyrene label monomer, or to an ionic pyrene probe 1-pyrenemethylamine hydrochloride (PyMeA · HCl) in water was observed. The NRET efficiency was expressed as the emission intensity ratio I/I₀ of naphthalene with and without existence of pyrene in the surrounding solution. With increasing pyrene concentration, I/I₀ decreased down to about 0.2 and the mechanism for this NRET from the inner naphthalene label to the pyrene labels in solution is still ambiguous.     

SDS胶束对孔雀绿褪色反应的影响

研究了十二烷基硫酸钠（SDS）表而活性剂胶束和预胶束对孔雀绿褪色可逆反应的影响，建立了1－1型可逆反应的胶束催化模型和预胶束催化模型，获得了胶束相中正逆反应的速率常数和预胶束的平均聚集数．结果表明，SDS胶束和预胶束对正反应有禁阻作用，而对逆反应有催化作用．     

A DFT study of the generation of interstellar species XN (X = Cl, and Br) activated by molecular sieve clusters

A cluster DFT (B3LYP) calculation study of ClN₃ and BrN₃ dissociation pathways catalyzed by molecular sieve is reported. A three-tetrahedral molecular sieve cluster (Al(OHSiH₃)(OSiH₃)(OH)₂, called T3) has been chosen in this study. Triplet-state products ClN and BrN are more easily produced with T3 molecular sieve cluster. Although the potential energy surfaces with T3 molecular sieve cluster are similar with those without T3 molecular sieve cluster, the dissociation process of ClN₃ and BrN₃ with T3 molecular sieve cluster becomes easier, which can be attributed to smaller energy gaps from the ground state reactant to the intersystem crossing point.     

Elucidating dominant factors of PO43-, Cd2+ and nitrobenzene removal by biochar: A comparative investigation based on distinguishable biochars

Four distinct biochars were employed to remove three typical pollutants, meanwhile, path analysis, a multi-statistical regression method, was performed to elucidate the dominant factors of biochar adsorption. This work can provide a new insight to prepare a targeted biochar as adsorbents.     

Hydrogen bonding networks controllable by the substitution position of tetrathiafulvalene on the pyridine ring

Because of the effect of pyridine on the substituent position on the TTF group, TTF derivatives exhibit different assembly structures at the interface, which will be of great significance to the construction of functional nanostructures from the molecular design point of view.     

Sequential Injection Photometric Determination of Molybdenum Using Organic Wetting Film Extraction

Wetting film extraction was combined with colorimetry to determine nanogram amounts of molybdenum(VI). The simple extraction procedure enhanced sensitivity and selectivity while maintaining a high sample throughput. Extraction and back extraction steps were exploited to exclude interference from the 31 metal species and 11 anions tested. In the first step, molybdenum(VI) was extracted into a toluene film as an ion paired complex. Molybdenum(VI) reacted with thiocyanate to form anionic molybdenum(V) and/or molybdenum(VI) thiocyanate complexes. The complexes were extracted into a toluene film containing tetraheptylammonium bromide as ion pairing reagent. The thiocyanate ligands were displaced by 1,5-diphenylcarbazone (DPC) to form a more intensely colored complex (λ_max= 540 nm). DPC was introduced in the back extraction solvent, methanol. The relative standard deviation was 2.5% for 50 ng ml⁻¹of molybdenum(VI) (n= 10) at a rate of 25 samples h⁻¹. The detection limit (3 × baseline noise) was 2.5 × 10⁻⁸M.     

离聚体溶液

离聚体（ionomer）是指含离子基团低于15mol％的聚合物，这些离子基团能聚集成多重离子对[1]或离子簇[2-6]，使大分子链发生物理文联形成聚集体，导致性质起很大变化。例如常温下因物理交联而具有良好弹性，而高温时物理交联被破坏而具有流动性，所以离聚体能制成热塑性弹性体。由于物理交联存在，离聚体不能轻易溶于非极性溶剂中；由于离子含量低，又不易溶于水或其它强极性溶剂中．因此，尽管离聚体固体的研究和应用已有40多年的历史，但有关溶液研究的报导到70年代末才见发表[7-9]，近10年取得较大进展，其独特的粘度关系使人们考虑利用…