Colorimetric Detection of Fe(II) and Co(II) by Using Terpyridine-Based Derivative

Journal of Applied Spectroscopy - A multi-ion chromogenic sensor based on a terpyridine moiety was developed for the semiquantitative, visual, and sensitive speciation analysis of Fe2+ and Co2+...     

高能COIL偏振态的实验研究

 通过两块楔镜补充衰减和中性衰减片相结合的能量衰减方法,测得了功率密度为20 W/mm² COIL的偏振态。采用角反射器作为稳定腔折返装置,提高了激光能量分布的均匀性。激光光束分别以45°的入射角入射到两块楔镜上,被楔镜反射后,垂直通过中性衰减片,最后进入偏振态测试仪。实验结果表明：在腔内没有任何偏振选择器件和不加外部电磁场的情况下,采用折叠式稳定腔的横流双模块氧碘化学激光光束呈现部分偏振性质,而且在出光过程中偏振度逐渐降低。     

谐和与噪声联合作用下Duffing振子的安全盆分叉与混沌

研究了软弹簧Duffing振子在确定性谐和外力和有界随机噪声联合作用下，系统安全盆的侵蚀和混沌现象.推导出系统的随机Melnikov过程，根据Melnikov过程在均方意义上出现简单零点的条件给出了系统出现混沌的临界值，然后用数值模拟方法计算了系统的安全盆分叉点.结果表明，由于随机扰动的影响，系统的安全盆分叉点发生了偏移，并且使得混沌容易发生. 关键词： Duffing振子 安全盆 分叉 混沌     

感应耦合等离子体刻蚀在聚合物光波导制作中的应用

提出了利用感应耦合等离子体(ICP)刻蚀技术提高聚合物光波导器件性能的方法,介绍了ICP刻蚀技术的原理和优点。选取聚甲基丙烯酸甲酯-甲基丙烯酸环氧丙酯(P(MMA-GMA))作为波导材料,采用氧气作为刻蚀气体,研究了ICP参数变化对刻蚀效果的影响。介绍了倒脊形光波导的制备过程,采用改变单一工艺参数的方法,分析了刻蚀效果随时间、功率、压强、气体流量等参数的变化,对参数优化后刻蚀得到的凹槽和平板结构进行了表征。实验结果表明:在天线射频功率为300 W,偏置射频功率为30 W,气体压强为0.5 Pa,氧气流速为50 cm³/min的条件下,可获得侧壁陡直、底面平整的P(MMA-GMA)凹槽结构。     

A Stabilized Finite Element Method for Non-Stationary Conduction-Convection Problems

This paper is concerned with a stabilized finite element method based on two local Gauss integrations for the two-dimensional non-stationary conduction-convection equations by using the lowest equal-order pairs of finite elements. This method only offsets the discrete pressure space by the residual of the simple and symmetry term at element level in order to circumvent the inf-sup condition. The stability of the discrete scheme is derived under some regularity assumptions. Optimal error estimates are obtained by applying the standard Galerkin techniques. Finally, the numerical illustrations agree completely with the theoretical expectations.     

溶剂热合成法制备的Zn1-xMnxO和Zn1-2xMnxLixO纳米材料的磁学性质

用溶剂热合成法在160oC制备出Zn_1-xMn_xO纳米棒和Zn_1-2xMn_xLi_xO纳米颗粒. XRD和拉曼测试结果表明Mn离子已很好地掺入ZnO母体中. M-H图中未观察到磁回滞,ESR谱中的精细结构说明掺杂的Mn离子间没有铁磁相互作用. 共掺Li仅仅改变了产物的形貌,并不能改变其磁学性质.     

Possible link of a structurally driven spin flip transition and the insulator-metal transition in the perovskite La(1-x)Ba(x)CoO3

The nature of the magnetic ground state near the insulator-metal transition (IMT) in La(1-x)Ba(x)CoO3 was investigated via neutron scattering. Below the critical concentration, x(c)～0.22, a commensurate antiferromagnetic (AFM) phase appears initially. Upon approaching x(c), the AFM component weakens and a ferromagnetic (FM) ordered phase sets in while in the rhombohedral lattice. At x(c), a spin flip to a new FM structure occurs at the same time as the crystal symmetry transforms to orthorhombic (Pnma). The Pnma phase may be the driving force for the IMT.     

Coherent interference induced transparency in self-coupled optical waveguide-based resonators

We propose a self-coupled optical waveguide (SCOW)-based resonator to generate an optical resonance analogous to electromagnetically induced transparency (EIT). The EIT-like effect is formed by the coherent interference between two resonance paths inherent to the SCOW resonator. For cascaded SCOW resonators, the spectrum they produce is significantly affected by the phase shift between them, with the EIT-like peak flattened or split as the two extreme cases. We also investigate the dispersion characteristics of an infinite array of SCOW resonators and show that the dispersion relation and group index in the EIT subband can be greatly changed by a small phase shift between the SCOW resonators.     

基于异面交会的空中运动目标定位算法及误差分析

介绍了空中运动目标定位测量的经纬定位仪单站定向和双站异面交会定位原理,并对影响定向和定位结果的各个因素进行了误差分析和仿真.结果表明,交会角在[40°,165°]时.测量精度有明显地改善,为组网测量布站提供了依据.黑火药爆炸试验测量结果验证了该方法的可行性和测量精度.     

Bending insensitivity of fiber Bragg gratings in suspended-core optical fibers

This Letter presents simulation and experimental results that explore bending insensitivity of fiber Bragg gratings in suspended-core optical fibers. The implementation of thin silica bridge in the fibers enhances index contrast of the fiber core and reduces bending-induced strain transfer to the fiber core. This fiber design lead to a reduction of over 7 times in strain-induced fiber Bragg grating resonant peak shifts in the suspended-core fiber compared with that in standard telecommunication fiber, and an 0.14 dB bending loss at a bending radius of 6.35 mm.