Triple-period partial misfit dislocations at the InN/GaN (0001) interface: A new dislocation core structure for III-N materials

The lattice-misfit InN/GaN (0001) interface supports a triangular network of α-core 90° partial misfit dislocations. These misfit dislocations provide excellent strain relief. However, in their unreconstructed form the dislocation contains numerous high-energy N dangling bonds, which must be eliminated by reconstructing the dislocation core. Existing single-period (SP) and double-period (DP) dislocation reconstruction models eliminate these dangling bonds via a like-atom dimerization, such as N-N dimers. However, we show that these N–N dimers are unstable for the III-N materials, so an entirely new reconstruction mechanism is needed. A “triple-period” (TP) structural model is developed which eliminates N dangling bonds via the formation of N vacancies instead of N-N dimers. The model contains no N–N (or III–III) bonds, fully bonds all N atoms to four group-III neighboring atoms, and satisfies the “electron counting rule” by transferring charge from In dangling bonds to Ga dangling bonds.     

Molecular dynamics simulations of displacement cascades in Fe-10%Cr systems

Molecular dynamics simulations of the displacement cascades in Fe-10%Cr systems are used to simulate the primary knocked-on atom events of the irradiation damage at temperatures 300,600,and 750 K with primary knockedon atom energies between 1 and 15 keV.The results indicate that the vacancies produced by the cascade are all in the central region of the displacement cascade.During the cascade,all recoil Fe and Cr atoms combine with each other to form Fe-Cr or Fe-Fe interstitial dumbbells as well as interstitial clusters.The number and the size of interstitial clusters increase with the energy of the primary knocked-on atom and the temperature.A few large clusters consist of a large number of Fe interstitials with a few Cr atoms,the rest are Fe-Cr clusters with small and medium sizes.The interstitial dumbbells of Fe-Fe and Fe-Cr are in the 111 and 110 series directions,respectively.     

热流计校准装置自适应温度控制方法研究

以热流计校准装置为研究对象,建立了热板温度仿真模型。根据模糊控制原理和BP神经网络原理,分别设计了模糊PID控制器和BP神经网络PID控制器,并在Matlab的Simulink下进行了不同控制方法的仿真对比实验。仿真结果表明:模糊PID有更快的响应速度、更短的稳定时间,BP神经网络PID有更小的超调量。     

Radiation characteristics and implosion dynamics of tungsten wire array Z-pinches on the YANG accelerator

We investigated the radiation characteristics and implosion dynamics of low-wire-number cylindrical tungsten wire array Z-pinches on the YANG accelerator with a peak current 0.8-1.1 MA and a rising time ～ 90 ns.The arrays are made up of(8-32)×5 μm wires 6/10 mm in diameter and 15 mm in height.The highest X-ray power obtained in the experiments was about 0.37 TW with the total radiation energy ～ 13 kJ and the energy conversion efficiency ～ 9%(24×5 μm wires,6 mm in diameter).Most of the X-ray emissions from tungsten Z-pinch plasmas were distributed in the spectral band of 100-600 eV,peaked at 250 and 375 eV.The dominant wavelengths of the wire ablation and the magneto-Rayleigh-Taylor instability were found and analyzed through measuring the time-gated self-emission and laser interferometric images.Through analyzing the implosion trajectories obtained by an optical streak camera,the run-in velocities of the Z-pinch plasmas at the end of the implosion phase were determined to be about(1.3-2.1)×10 7 cm/s.     

Charge ordering modulations in Bi0.4Ca0.6MnO3 film with a thickness of 110 nm

Low temperature sample stage in transmission electron microscope is used to investigate the charge ordering behaviours in Bi_0.4Ca_0.6MnO₃ film with a thickness of 110 nm at 103 K. Six different types of superlattice structures are observed using selected-area electron diffraction (SAED) technique, while three of them match well with the modulation stripes in high-resolution transmission electron microscopy (HRTEM) images. It is found that the modulation periodicity and direction are completely different in the region close to the Bi_0.4Ca_0.6MnO₃/SrTiO₃ interface from those in the region a little far from the Bi_0.4Ca_0.6MnO₃/SrTiO₃ interface, and the possible reasons are discussed. Based on the experimental results, structural models are proposed for these localized modulated structures.     

热处理对富硅氧化硅薄膜中硅纳米晶形成的影响

采用磁控溅射法制备了富硅氧化硅薄膜, 然后分别经过一步热处理、两步热处理和快速热处理制备了镶嵌有硅纳米晶的氧化硅薄膜. 实验结果表明, 在硅含量为～ 42.63 at.%的富硅氧化硅薄膜中, 三种热处理均能形成10¹²/cm²量级的硅纳米晶. 其中在两步热处理中, 硅纳米晶的密度最高, 达到2.2× 10¹²/cm², 并且尺寸均匀、结晶完整性好; 一步热处理后的样品中, 硅纳米晶密度较低, 并且部分纳米晶结晶不充分; 快速热处理后的样品中, 硅纳米晶密度最低、尺寸分布不均匀, 并且存在孪晶结构. 分析认为, 热处理初始阶段的形核过程对纳米晶的密度及微观结构有着重要的影响, 两步热处理中的低温段促进了纳米晶的成核, 有助于形成高密度高质量硅纳米晶.     

Spectral Anomalies in the Fraunhofer Diffraction Pattern

We study the spectral characteristics theoretically and experimentally in the Fraunhofer diffraction pattern formed by the diffraction of a spatially coherent, polychromatic light through a slit. It is found that the spectrum in some diffraction directions close to the singular direction is redshifted, compared to the spectrum of the incident polychromatic light, and blueshifted in other directions, and splits into two lines at the singular direction. We show that the experimental results are consistent with the theoretical expectations.     

“神光Ⅱ”装置激光输出波形的数值模拟

推广应用“激光放大一维问题的解”的计算方法,模拟计算了“神光Ⅱ”装置激光束放大链的传输波形,并与实验结果进行比较,符合较好. 为功率平衡的研究提供了有力工具. 关键词： 模拟计算 激光束 波形 功率平衡     

Pr(0.5):ZBLAN的双频激发上转换发光的研究

报道了Pr(0.5):ZBLAN玻璃在双频双光束光源激发下的激发态上转换现象.发现上转换发射谱的荧光与常规荧光发射谱的荧光一致，还发现双频激发下的上转换激发谱有3个明显的谱峰，它们依此对应于788.5nm 1G4→3P2,850.5nm 1G4→1I6和805.0nm 3H6→1D2的激发态吸收跃迁，而大的850.5nm上转换激发谱峰是由大的1G4(Pr3+ )→1I6(Pr3+)跃迁的振子强度f=23.04×10-6所致.这说明起源于1G4能级的激发态吸收上转换尤其1G4(Pr3+)→1I6(Pr3+)