一种局部相含率测量方法

在局部电导探针和单丝电容探针的基础上,提出一种新型局部电容探针,用于测量两相流的局部相含率。静态研究表明,局部电容探针能够测量空气水两相流的局部相含率,测量结果不受导电相电导率变化的影响。从工业蒸馏水变化到饱和食盐水(NaCl的质量分数0～5%),局部电容探针输出结果没有明显变化。电极距离在0～30 mm的范围内变化,测量结果变化小于1%。动态实验表明,局部电容探针测量的两相流的局部相含率,能够很好反映流动过程(以弹状流为例),和实验观察结果完全一致。只需要设置简单的阈值大小,就可以得到相含率的大小。     

Investigation of luminescence properties in SiO2: Tb,Yb upconversion inverse opal

The SiO₂: Tb, Yb inverse opals with photonic band gap at 465 or 543 nm were prepared, and an effect of photonic band gap on upconversion spontaneous emission from Tb³⁺ was investigated. The results show that the photonic band gap has a significant influence on the upconversion emission of the SiO₂: Tb, Yb inverse opals. The upconversion luminescence of the Tb³⁺ ions is suppressed in the inverse opal compared with the luminescence of that of the reference sample.     

Determining the gamma-ray parameters for BaO–ZnO–B2O3 glasses using MCNP5 code: a comparison study

Rapid technological advancement has multiplied people’s exposure to ionizing radiations greatly. Widespread applications of radiation in different fields (such as agriculture, radiation therapy and scientific research fields) require that humans be protected against unnecessary exposure. In this study, mass attenuation coefficient (μ_m), half-value layer, mean-free path, effective atomic number (Z_eff) and exposure buildup factor have been calculated for xBaO–20ZnO–(80???x)B₂O₃ (x?=?5, 10, 15, 20 and 25?mol%) glass systems. The mass attenuation coefficients of the selected glasses were calculated using simulation method of MCNP5 code. The simulation results have been compared with the experimental data and Xcom at the energies 223.02, 252.98, 287.28, 340.83, 398.97, 481.59, 562.68 and 662.00?keV. The agreement amounts of the mass attenuation coefficient values are from 0.2% to 2.8% and from 0.2% to 6.98% for MCNP5 and Xcom relative to experimental results, while the Monte Carlo program values are higher than that obtained by experimental data, using Xcom and MCNP5 code. The glass sample having the highest value of BaO content show high radiation shielding properties. It indicates that the MCNP5 code can be used for estimation of radiation interaction parameters where experimental results are not available.     

同轴电缆自感系数问题的两种新解法

本文对圆柱型同轴电缆自感系数问题进行了深入的讨论．文中把同轴电缆看成是由大量的“子回路”并联构成“单匝回路”，从子回路间的磁耦合角度出发提出了两种全新的同轴电缆自感系数的求解方法。     

Design and Performances of a Carbon Monoxide Sensor Using Mid-Infrared Absorption Spectroscopy Technique at 4.6 µm

Based on infrared absorption spectroscopy technique, a carbon monoxide sensor was developed using the fundamental absorption band of carbon monoxide molecule at the wavelength around 4.6 µm. The developed sensor consists of pulse-modulated wideband incandescence, open ellipsoid light-collector gas-cell, dual-channel detector, and control and signal-processing module. With the prepared standard carbon monoxide gas sample, sensing characteristics on carbon monoxide were investigated using the sensor. Experimental results reveal that the limit of detection is about 10 ppm, the relative error at the limit of detection point is less than 14%, and that is less than 7.8% within the low concentration range of 20～180 ppm. The maximum absolute errors of 50 min long-term measurement on the 0 and 14 ppm CO gas samples are about 3 and 3.17 ppm, respectively, and the standard deviations are as small as 0.18 and 1.25 ppm, respectively. Compared with the reported carbon monoxide detection systems utilizing quantum cascaded lasers and distributed feedback lasers, the proposed sensor shows potential applications in carbon monoxide detection under the circumstances of coal-mine and environmental protection, by virtue of high performance, low cost, simple optical structure, and so on.     

Rheological Behaviors of Polypropylene/Poly(1-butene) Blends

The rheological behaviors of polypropylene (PP)/poly(1-butene) (PB) blends with homo-polypropylene (PP₁) or impact polypropylene (PP₂), a poly(propylene-co-ethylene) as the PP component were studied. With increasing of PB resin content for both PP/PB blends, the blends showed higher G'(ω), G''(ω) and η*(ω) at low frequencies but lower values at high frequencies which implied that the processability was improved. A two-phase morphology was observed through the various rheological responses, including G'(ω)-ω terminal region curves, Cole-Cole plots and the weighted relaxation spectra with the PB contents up to 40?wt%. With the same PB content, the rheological parameters of the PP₂/PB blends were quite different from those of the PP₁/PB, which can be attributed to the stronger interaction between PB chains and the ethylene-co-propylene copolymer in PP₂. The impact strength of the PP₂/PB blends was improved dramatically over that of the PP₁/PB. The more significant toughening effect for the PP₂/PB blends can be attributed to the special responses of its rheological behaviors.     

Theory of third-harmonic generation using double half-Gaussian hollow beams and self-phase-matching

We first (to best of out knowledge) use the slowly varying envelope approximation (SVEA) to obtain the equation of third harmonic (TH) generated by focusing the double half-Gaussian hollow beams into an atomic medium. The two-dimension intensity distribution is achieved by simulating, and it is similar to that generated by the 0th order Bessel beams. In addition to the similarities between the experimental setups, we demonstrate the accuracy of the equation. Compared with that generated by the Bessel beams, the pattern of the TH intensity generated by the double half-Gaussian hollow beams has salient features.     

Realization of an efficient coherent combination via Michelson cavity

An intracavity coherent coupling Michelson erbium-doped fibre (EDF) laser (MCEDFL) is proposed and demonstrated. By using this laser system, we find a means to obtain a maximum power output at the same pumping power level. From the experiment based on fibre Bragg gratings (FBGs) with different reflectivities from 6{\%} to 100{\%}, we find that the reflectivity of the FBG plays a vital role in improving the performance of the MCEDFL. At the same time, the MCEDFL with a polarizer can be coherently combined effectively. This type of system, in principle, is compatible with other more powerful pumping methods, such as cladding pumping, and brings some novel perspectives to the realization of high power lasers.     

Coherence phenomena in the phase-sensitive optical parametric amplification inside a cavity

We theoretically and experimentally demonstrate coherence phenomena in optical parametric amplification inside a cavity. The mode splitting in the transmission spectra of a phase-sensitive optical parametric amplifier is observed. Especially, we show that a very narrow dip and peak, which are the shape of a delta function, appear in the transmission profile. The origin of the coherence phenomenon in this system is the interference between the harmonic pump field and the subharmonic seed field in cooperation with dissipation of the cavity.     

Measurement of the wrong-sign decays D0 --> K+ pi- pi0 and D0 --> K+ pi- pi+ pi-, and search for CP violation

Using 281 fb-1 of data from the Belle experiment recorded at or near the (4S) resonance, we have measured the rates of the "wrong-sign" decays D0 --> K+ pi- pi0 and D0 --> K+ pi- pi+ pi- relative to those of the Cabibbo-favored decays D0 --> K- pi+ pi0 and D0 --> K- pi+ pi+ pi-. These wrong-sign decays proceed via a doubly Cabibbo-suppressed amplitude or via D0-D0 mixing; the latter has not yet been observed. We obtain R(WS)(K pi pi0) = [0.229 +/- 0.015(stat)(+0.013)(-0.009)(syst)]% and R(WS)(K3pi) = [0.320 +/- 0.018(stat)(+0.018)(0.013)(syst)]%. The CP asymmetries are measured to be -0.006 +/- 0.053 and -0.018 +/- 0.044 for the K+ pi- pi0 and K+ pi- pi+ pi- final states, respectively.