微波频率下Ba0.5Sr0.5TiO3薄膜的介电特性随温度及外加偏压变化的检测

提出了一种新的结构来表征钛酸锶钡薄膜在微波频率下的介电特性,即在沉积有钛酸锶钡薄膜的氧化镁基片上制作了共面带阻滤波器.借助于共面带阻滤波器的谐振频率和Q值,通过比较其测量值与仿真值,可以得出钛酸锶钡薄膜的介电常数和介电损耗.在变温测试过程中,注意到金导电层的电导率对带阻滤波器的谐振频率和Q值有较大的影响.为了准确地得到钛酸锶钡薄膜的介电特性,仔细分析了金导电层对带阻滤波器频率响应曲线的影响,并在比较求值过程中消除了这一影响.     

适用于雷达系统的高温超导窄带滤波器

对雷达系统,通过在接收前端安置高Q、窄带、高带外抑制的滤波器,可以有效减少信号间的干扰,由此可见高性能的滤波器对于雷达系统来说,具有重要作用.与常规滤波器相比,高温超导滤波器具有带边陡峭、插入损耗小、带外抑制高、可以设计极窄带等特点.在本文中,我们设计加工了一种高性能的12阶切比雪夫(Chebyshev)高温超导带通滤波器,其中心频率为1341兆赫兹、带宽为5.035兆赫兹,可用于雷达系统.在滤波器设计中,我们用Sonnet软件对滤波器进行了仿真计算.最后滤波器在以氧化镁为衬底的双面超导薄膜上制作,衬底直径为2英寸、厚度为0.5毫米.测试结果表明,该滤波器符合设计要求,具有很好的选择性和带外抑制.     

利用皮秒脉冲激光驱动瞬态X射线激光

报道了利用皮秒激光驱动产生瞬态类镍银X射线激光的实验结果.采用一路脉冲宽度为数百皮秒的激光作为预脉冲，配合另一路皮秒激光作为主脉冲联合驱动平面靶，获得了一定强度的类镍银X射线激光输出，输出能量约为5—10nJ. 关键词： 瞬态X射线激光 长短脉冲联合驱动 皮秒脉冲激光     

Multi-Sensor Vibration Signal Based Three-Stage Fault Prediction for Rotating Mechanical Equipment

In order to reduce maintenance costs and avoid safety accidents, it is of great significance to carry out fault prediction to reasonably arrange maintenance plans for rotating mechanical equipment. At present, the relevant research mainly focuses on fault diagnosis and remaining useful life (RUL) predictions, which cannot provide information on the specific health condition and fault types of rotating mechanical equipment in advance. In this paper, a novel three-stage fault prediction method is presented to realize the identification of the degradation period and the type of failure simultaneously. Firstly, based on the vibration signals from multiple sensors, a convolutional neural network (CNN) and long short-term memory (LSTM) network are combined to extract the spatiotemporal features of the degradation period and fault type by means of the cross-entropy loss function. Then, to predict the degradation trend and the type of failure, the attention-bidirectional (Bi)-LSTM network is used as the regression model to predict the future trend of features. Furthermore, the predicted features are given to the support vector classification (SVC) model to identify the specific degradation period and fault type, which can eventually realize a comprehensive fault prediction. Finally, the NSF I/UCR Center for Intelligent Maintenance Systems (IMS) dataset is used to verify the feasibility and efficiency of the proposed fault prediction method.     

向心加速度公式的教具制作及其教学研究——基于Tracker和Phyphox软件的定量探究

从教具制作、定量实验探究和教学启示等三方面来探究匀速圆周运动的向心加速度公式,即利用自制教具探究向心加速度αc与圆周运动半径r和角速度ω之间的定量关系.实验发现,结果非常好地符合理论预期.最后讨论了该教具所蕴含的教学启示,可以将其设计成适合高中物理教学的验证性、探究性实验及课外科创活动,从而培养学生的科学探究能力、科学...     

ZnMgO/ZnO异质结构中二维电子气的研究

论文根据ZnMgO/ZnO异质结构二维电子气的能带结构及相关理论模型, 采用一维Poisson-Schrodinger方程的自洽求解, 模拟计算了ZnMgO/ZnO异质结构中二维电子气的分布及其对ZnMgO势垒层厚度及Mg组分的依赖关系. 研究发现该异质结构中ZnMgO势垒层厚度存在一最小临界值: 当垒层厚度小于该临界值时, 二维电子气消失, 当垒层厚度大于该临界值时, 其二维电子气密度随着该垒层厚度的增加而增大; 同时研究发现ZnMgO势垒层中Mg组分的增加将显著增强其二维电子气的行为, 导致二维电子气密度的明显增大; 论文对模拟计算获得的结果与相关文献报道的实验结果进行了比较, 并从极化效应和能带结构的角度进行了分析和讨论, 给出了合理的解释. 关键词： 氧化锌 二维电子气 异质结构 理论计算     

FeMn掺杂AlN薄膜的制备及其特性研究

采用直流磁控共溅射技术, 以Ar与N₂为源气体, 硅片为衬底成功地制备了Fe, Mn掺杂AlN薄膜. 利用X射线衍射和拉曼光谱研究了工作电流、靶基距离等工艺参数的改变对薄膜结构的影响. 利用扫描电子显微镜和能谱分析仪对薄膜的表面形貌和组成成分进行了分析. 利用振动样品磁强计在室温下对Fe, Mn掺杂AlN薄膜进行了磁性表征. Mn掺杂AlN薄膜表现出顺磁性的原因可能是由于Mn掺杂浓度较高, 在沉积过程部分Mn以团簇的形式存在, 反铁磁性的Mn团簇减弱了体系的铁磁交换作用. Fe掺杂AlN薄膜表现出室温铁磁性, 这可能是AlFeN三元化合物作用的结果. 随着Fe 掺杂AlN薄膜中Fe原子浓度从6.81%增加到16.17%, 其饱和磁化强度M_s由0.27 emu·cm^-3逐渐下降到0.20 emu·cm^-3, 而矫顽力H_c则由57 Oe增大到115 Oe (1 Oe=79.5775 A/m), 这一现象与Fe离子间距离的缩短及反铁磁耦合作用增强有关. 关键词： 直流磁控共溅射 氮化铝薄膜 结构 磁性     

How much information is needed to be the majority during the binary-state opinion formation?

In this paper, we try to propose a toy model, which follows the majority rule with the Fermi function, to uncover the role of the heterogeneous interaction between individuals in opinion formation. In order to do this, we define the impact factor I_Fi$I{F}_i$, says individual i$i$, as the exponential function of its connectivity _ki$k_i$ with the tunable parameter β$\beta$. β$\beta$ also shows the public information that can be collected by individuals in the system. We realize our model in scale-free networks with mean connectivity 〈k〉$〈k〉$. We find that much more public information (β>_β2$\beta >{\beta }_2$) and less public information (β<_β1$\beta <{\beta }_1$) cannot let either of the two opinions be the majority during the opinion formation. Furthermore, _β1${\beta }_1$ is a constant and equal to −0.76(±0.04)$-0.76(\pm 0.04)$, and _β2${\beta }_2$ decreases as a power-law function of the mean connectivity 〈k〉$〈k〉$ of the network. Our work can provide some perspectives and tools to understand the diversity of opinion in social networks.     

Self-Assembled Microfibers of Simple Amphiphilic Molecules Through a Facile Precipitation Route

One-dimensional (1D) fiber structures of simple amphiphilic molecules were prepared through a facile precipitation route. The self-assembly process was studied by ultraviolet-visible absorption and Fourier transform infrared) spectroscopy, which indicated that hydrogen bonding interactions played a role in the1D growth along the axis of the fiber. The water content, self-assembling temperature, and concentration of 1,5-bis-(1-(pyridin-2-yl)ethylidene)thiocarbonohydrazide molecules in the solution had obvious effects on the size and morphology of the self-assembled products. The formation of1D superstructures is not only of a hot subject in the process of nanoscience but also opens a new venue for conveniently controlling self-assembled structures of similar organic molecules.